Synthesis of planar inductors in low temperature co-fired ceramic technology

A simple bisection algorithm for the synthesis of planar inductors using a fast electromagnetic analysis algorithm is presented in this work. Both bisection and electromagnetic analysis algorithms are based on a set of heuristic and physical rules obtained from the study of the electromagnetic behavior of these planar devices. With this procedure, the benefits are two fold: (i) the number of iterations is kept moderately low in the synthesis loop, and (ii) the analysis at each iteration step is speed up without compromising accuracy. The algorithm is applied to the development of an inductor library for a low temperature co-fired ceramic process technology.     

Wireless Sensor Networks in IPv4/IPv6 Transition Scenarios

The wireless sensor networks (WSNs) concept was appeared in the middle of 90s and have been a subject under intensive research in the past few years. Several factors have contributed to this, but the potential for application of WSNs in almost every aspect of day-to-day life is the predominant one. This type of networks has been developed using proprietary solutions instead of standard solutions. More recently, the importance of standards motivated the use of IETF standards in WSNs, making the Internet integration easier. However, more efforts are necessary in order to provide a full integration. The WSNs use mainly IPv6 protocol, but the IPv4 is the predominant one in the Internet. As a consequence, IPv4 to IPv6 transition mechanisms must be provided to allow the interaction between all Internet connected devices independently of the supported IP version. It is also critical to provide a standard application interface to make easier the application development and independently of the hardware platform used. The RESTfull Web services can provide this standard interface. So, combine RESTfull Web services with IPv4 to IPv6 transition mechanisms can increase the WSN services dissemination. The transition mechanisms and the REST Web services are supported in the gateway in order to save the wireless sensor device resources’. The smartphone with Internet connectivity can also be the drive to the WSNs growth, because user-friendly applications can be used to retrieve and collect sensed data. This paper proposes a solution based on REST web services to permit the interaction between a mobile application and the IPv6 compliant WSN.     

A Multi-user Receiver for Inter-Cell Interference Reduction in LTE PUCCH Signaling

In 3rd generation partnership project (3GPP) long term evolution (LTE) systems, when no resources has been assigned in the uplink to a given user equipment (UE), the control information associated with layers 1 and 2 in the protocol stack is conveyed back to the base station through the so-called physical uplink control channel (PUCCH). In PUCCH, the data streams transmitted by multiple UEs are multiplexed in the time-domain and in the frequency-domain with the aid of spreading codes. Although the spreading codes associated with UEs within the same cell can be assumed to be orthogonal, the presence of inter-cell interference (ICI) in multi-cell scenarios severely limits receiver performance. In particular, the Format 1 of PUCCH, which is associated with the transmission of hybrid automatic repeat request acknowledgements (ACK/NACK) and scheduling requests, has a major impact on system performance, since an incorrectly decoded ACK/NACK message may introduce significant delay in data transmission. In this contribution, we propose a new multi-user receiver for ICI reduction in PUCCH LTE that operates both in cooperative and non-cooperative multi-cell architectures. The proposed receiver relies on a constrained tensor modeling of the received signal in PUCCH signaling, and affords an iterative joint channel estimation and symbol detection by simultaneously exploiting the energy of the data symbols and the pilot tones present in PUCCH. The formulation of the proposed algebraic receiver model incorporates symbol-basis hopping and slot-basis hopping signaling schemes, which are interference randomization techniques existing in the 3GPP specifications of LTE system. Computer simulation results show the remarkable performance gains of the proposed receiver compared to the conventional time-frequency decorrelator based receiver.     

Effect of colloidal silica on the mechanical properties of fiber–cement reinforced with cellulosic fibers

The effect of colloidal silica on the hydration reaction of the Portland cement system and its effect on the resulting mechanical properties are not completely understood. Silica nanoparticles can affect the behavior and performance of fiber–cement, such as the calcium–silicate–hydrate gel of the matrix and the fiber–matrix interface bonding. The main objective of this study is to evaluate the effects of various contents of colloidal silica (0, 1.5, 3, 5, and 10 % w/w) on the microstructure and mechanical performance of cement composites reinforced with cellulosic pulp. Fiber–cement composites with unbleached eucalyptus Kraft pulp as the micro-fiber reinforcement were produced by the slurry dewatering technique followed by pressing. The average values of the modulus of rupture of the fiber–cement decreased with increasing colloidal silica content. However, the pullout of the fibers increased significantly in the fiber–cement composites with additions between 3 and 10 % w/w of colloidal silica suspension, as indicated in the scanning electron microscopy images and by the improvement in the energy of fracture values.     

Product properties of a two-phase magneto-electric composite: Synthesis and numerical modeling

Magneto-electric (ME) materials are of high interest for a variety of advanced applications like in data storage and sensor technology. Due to the low ME coupling in natural materials, composite structures become relevant which generate the effective ME coupling as a strain-mediated product property. In this framework, it seems to be possible to achieve effective ME coefficients that can be exploited technologically. The present contribution investigates the realization of particulate ME composites with a focus on their experimental and computational characterization. We will show that different states of pre-polarizations of the ferroelectric material have a decisive influence on the overall obtainable ME coefficient. Details on the synthesis of two-phase composite microstructures consisting of a barium titanate matrix and cobalt ferrite inclusions will be discussed. Subsequently we will employ computational homogenization in order to determine the effective properties of the experimental composite numerically. We investigate the influence of different states of pre-polarization on the resulting ME-coefficients. For the numerical incorporation of the pre-polarization we use a heuristic method.     

Comparing Linear Viscoelastic Properties of Asphalt Concrete Measured by Laboratory Seismic and Tension–Compression Tests

Seismic measurements and conventional cyclic loading have been applied to a cylindrical asphalt concrete specimen to compare the complex modulus and complex Poisson’s ratio between the two testing methods. The seismic moduli and Poisson’s ratio have been characterized by optimizing finite element calculated frequency response functions to measurements performed at different temperatures. An impact hammer and an accelerometer were used to measure the frequency response functions of the specimen which was placed on soft foam for free boundary conditions. The cyclic loading was performed by applying both tension and compression to the specimen while measuring the displacements in the axial and radial direction. The Havriliak–Negami and the 2S2P1D model have been used to estimate master curves of the complex modulus and complex Poisson’s ratio from the seismic and the tension–compression tests. The seismic measurements performed at a lower strain level than the tension–compression test give a higher absolute value of the complex moduli (e.g. \({\sim }12\,\%\) at 100 Hz) and a lower phase angle compared to the tension–compression results.     

SeDeM expert system a new innovator tool to develop pharmaceutical forms

Context: The SeDeM expert system is based on the experimental study and quantitative determination of the characterization parameters of powdered substances, the aim being to determine whether a substance is suitable for producing tablets by means of direct compression (DC) technology, thereby reducing the lead time for pre-formulation studies. Additionally, this expert system also provides formulations with a minimum number of excipients.

Objective: We used this system to analyze suitable formulas for the production of orodispersible ibuprofen tablets.

Method: Twenty-one disintegrants and ibuprophen were characterized using SeDeM methodology.

Results: The results indicated that production of ibuprofen tablets by DC would require improvements in the dimension and compressibility factors of the active pharmaceutical ingredient. The expert system analysis provided the specific percentage of disintegrant needed to blend with ibuprofen and a standardized formula of lubricants in order to obtain a powder mix that would successfully produce tablets by DC. The eight formulas proposed by SeDeM were produced and tested in the laboratory.

Conclusion: All eight formulas successfully produced tablets by DC, but only four of them could be considered suitable for use as an orodispersible tablet and accomplishes all the pharmaceutical quality parameters. So, in fact, the use of the SeDeM system reduced the time of medicine’s development and therefore the cost of the activity.     

Spray-dried O-carboxymethyl chitosan as potential hydrophilic matrix tablet for sustained release of drug

Objective: The aim of the present investigation was to evaluate the use of spray-dried O-carboxymethyl chitosan (OCMCS) as potential hydrophilic matrix excipient for sustained release of drug.

Methods: The polymer was synthesized from chitosan, then spray-dried and characterized. Tablets with different OCMCS concentrations (80, 50, 30, 5 and 2% w/w), containing diltiazem (DTZ) as model drug, were prepared for direct compression (DC) and after the wet granulation method (WG).

Results: The spray-dried OCMCS powder was spherical, with a smooth surface and an average size of 2.2?µm. The tablets prepared for WG disintegrated in time less than 30?min. The tablets obtained for DC presented high retention of the drug, with zero order or Higuchi release kinetic. There was a direct relationship between the OCMCS concentration and the release ratio, swelling degree and water uptake behavior. DC tablets containing 80% OCMCS presented behavior as an effective swelling-control system. The DC tablets with 5% OCMCS showed a similar release profile at formulations with 30% HPMC.

Conclusion: Spray-dried OCMCS showed great potential as hydrophilic matrices for drug-sustained release.