A structured catalyst: Noble metal supported on a plate-type zirconia substrate prepared by anodic oxidation for steam reforming of hydrocarbon

A structured catalyst: noble metal supported on a plate-type zirconia substrate was prepared by subjecting a zirconium plate to a process consisting of anodic oxidation in an oxalic acid bath and calcination in the air, followed by rhodium or ruthenium component deposition by the dipping treatment. The catalytic performances of the prepared catalysts were evaluated for steam reforming of n-butane and propane. The substrate surface was significantly corroded by the anodic oxidation and calcination, and a rugged zirconia layer about 100 μm thick was formed. The crystalline state of zirconia was mainly monoclinic and tetragonal. In steam reforming of n-butane, the structured ruthenium catalyst had some activity, while the activity of the rhodium catalyst exceeded that of the commercial catalyst. For the rhodium catalyst, its reforming activity was improved by changing the temperature of dipping bath and the number of dips for adjustment of the rhodium deposition state. The rhodium catalyst prepared by dipping twice at a bath temperature of 25 °C has the largest metal surface area and a higher metal dispersion, which were thought to be the causes for the high performance. In steam reforming of propane, the rhodium catalyst showed a significantly higher activity than the commercial catalyst. The rhodium catalyst was less prone to deterioration of activity due to n-butane and propane reforming.     

Amorphous structure of iron oxide of bacterial origin

In nature, there are various iron oxides produced by the water-habitant bacterial group called “iron-oxidizing bacteria”. These iron oxides have been studied mainly from biological and geochemical perspectives. Today, attempts are made to use such iron oxides as novel functional materials in several applications. However, their quantitative structural characteristics are still unclear. We studied the structure of iron oxide of microtubular form consisting of amorphous nanoparticles formed by an iron-oxidizing bacterium, Leptothrix ochracea, using a combination of high-energy X-ray diffraction and reverse Monte Carlo simulation. We found that its structure consists of a framework of corner- and edge-sharing distorted FeO₆ octahedral units, while SiO₄ tetrahedral units are isolated in the framework. The results reveal the atomic arrangement of iron oxide of bacterial origin, which is essential for investigating its potential as a functional material.     

Kainate excitotoxicity is mediated by AMPA- but not kainate-preferring receptors in embryonic rat hippocampal cultures

We investigated kainate-induced excitotoxicity in embryonic rat hippocampal cells cultured in a chemically defined medium. Treatment with kainate for 24 h resulted in neuronal death, as assessed by the release of lactate dehydrogenase into the culture media. This neurotoxic effect was kainate dose- and culture age-dependent. EC50 of kainate was 127 +/- 11 microM. 2,3-dihydroxy-6-nitro-7-sulfamoylbenzo (f)quinoxaline (NBQX) completely blocked the toxicity, while MK801, an N-methyl-D-aspartate (NMDA) receptor antagonist, also blocked it but not completely. Furthermore, alpha-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid (AMPA) attenuated the kainate injury, while the selective and noncompetitive AMPA-preferring receptor antagonist 1-(4-aminophenyl)-4-methyl-7, 8-methylenedioxy-5H-2,3-benzo-diazepine (GYKI 52466) blocked it completely. Concanavalin A (ConA), which potentiates the response to kainate at kainate-preferring receptors, had little effect on kainate toxicity. Further, AMPA alone induced little toxicity, but produced remarkable toxicity when cyclothazide was used to block the desensitization of AMPA-preferring receptors. These results indicate that kainate excitotoxicity in hippocampal cultures is mediated by AMPA- but not kainate-preferring receptors, and that it involves NMDA-receptor-mediated toxicity. The non-desensitizing response at AMPA-preferring receptors may play an important role in kainate-induced excitotoxicity.     

A bead-alignment device with a bead-sized microchamber on a rotating cylinder for fabrication of a miniaturized probe array

We have developed a compact bead-alignment device with a bead-sized microchamber on a rotating cylinder. The cylinder fits inside a tube with bead-stock pipes containing different probe-conjugated beads and holes for bead-alignment capillaries. The cylinder rotates in the tube, and the microchamber transfers a single 100-microm-diameter bead from a pipe to one of the capillaries in 10 s. By using this process repeatedly, 'bead arrays', which are miniaturized DNA probe arrays in capillaries, were successfully fabricated.     

Hybridization reaction kinetics of DNA probes on beads arrayed in a capillary enhanced by turbulent flow

The hybridization reaction kinetics of DNA probes on beads arrayed in a capillary was investigated experimentally and theoretically by using fluid mechanical methods. A device was prepared to contain DNA probes conjugated on 103-microm-diameter beads that were queued in a 150-microm-diameter capillary. The hybridization experiments were performed by introducing sample into the capillary and moving it with a one-way or a reciprocal flow. From the relation between Reynolds number and the resistance coefficient of the system, we found that the flow in the system was turbulent and not laminar as has been said of other microfluidic devices. The reaction efficiency was estimated using a mass-transfer coefficient derived from Chilton-Colburn's analogy. The estimate agreed well with the experimental data. A diffusion equation under laminar assumption was also solved, but this estimated value was 4.0-10.4 times smaller than the experimental data. Using the device achieved a hybridization efficiency as high as approximately 90% in 10 min. It was concluded that the high hybridization performance of the device resulted from turbulent flow and that the flow compensated the slow molecular diffusion. Using this bead-included structure resulted in a rapid and effective reaction at the solid-liquid interface, and the device seems very promising for many future applications.     

Capacitance reduction of pulse voltage generator by using series voltage compensator

This paper proposes a new configuration of a pulse voltage generator, which can be applied to the klystron modulator for a large‐scale accelerator. The voltage generator consists of a conventional capacitor discharge type pulse voltage generator and series cascaded voltage compensators. By using the voltage compensators, higher voltage fluctuation of the bank capacitor is acceptable; therefore, its capacitance and the dimensions of the capacitors can be low. This paper discusses the control strategy of the voltage compensators and thyristors for DC voltage supply for the highly fluctuating capacitor voltage, and demonstrates this by a laboratory‐scale experimental setup.     

Tuning the Charge Carrier Polarity of Organic Transistors by Varying the Electron Affinity of the Flanked Units in Diketopyrrolopyrrole‐Based Copolymers

Fine‐tuning of the charge carrier polarity in organic transistors is an important step toward high‐performance organic complementary circuits and related devices. Here, three new semiconducting polymers, namely, pDPF‐DTF2, pDPSe‐DTF2, and pDPPy‐DTF2, are designed and synthesized using furan, selenophene, and pyridine flanking group‐based diketopyrrolopyrrole cores, respectively. Upon evaluating their electrical properties in transistor devices, the best performance has been achieved for pDPSe‐DTF2 with the highest and average hole mobility of 1.51 and 1.22 cm² V^?1 s^?1, respectively. Most intriguingly, a clear charge‐carrier‐polarity change is observed when the devices are measured under vacuum. The pDPF‐DTF2 polymer exhibits a balanced ambipolar performance with the µ_h/µ_e ratio of 1.9, whereas pDPSe‐DTF2 exhibits p‐type dominated charge carrier transport properties with the µ_h/µ_e ratio of 26.7. Such a charge carrier transport change is due to the strong electron‐donating nature of the selenophene. Furthermore, pDPPy‐DTF2 with electron‐withdrawing pyridine flanking units demonstrates unipolar n‐type charge transport properties with an electron mobility as high as 0.20 cm² V^?1 s^?1. Overall, this study demonstrates a simple yet effective approach to switch the charge carrier polarity in transistors by varying the electron affinity of flanking groups of the diketopyrrolopyrrole unit.