台儿庄城区饮用水水源地水质放射性水平分析

为了解和掌握台儿庄城区饮用水水源地放射性水平和动态变化,本文以枣庄市生态环境局台儿庄分局提供的饮用水水源地水质放射性数据为基础,探讨了台儿庄城区饮用水水源地水质中α、β放射性质量浓度的动态变化。结果显示:水源地总α、β放射性质量浓度均低于标准限值,总α放射性质量浓度小于总β放射性质量浓度,总α、β放射性水平在水源地和季节变化中差异均不显著(P>0.05)。水源地水质总放射性水平符合我国规定的饮用水指导值。     

众筹项目推荐:面向隐式反馈的深度学习协同过滤

目前,在推荐系统研究中,用户的隐式反馈,以及极度稀疏的数据,已成为影响协同过滤推荐效果的主要问题.针对这一现象,本文提出了深度学习协同过滤算法,先利用卷积神经网络,对用户-项目矩阵的隐层特征进行学习,再结合协同过滤,对用户-项目的交互信息进行建模,并将两种特征融合预测推荐列表.以众筹平台的数据为实验对象,比较模型中各参数对推荐效果的影响,并设计与基线方法的对比实验.实验结果表明:均匀采集负反馈,并在一定卷积层数的网络中,数据稀疏度越高,效果越好;对比基线方法,本文提出的算法在公开数据集(Yahoo!Movie)上取得了最好的推荐结果.本文提出的算法有助于提高众筹平台的融资成功率,同时也丰富了推荐系统的研究体系.     

基于云自适应遗传算法的NoC路径分配研究

路径分配是NoC设计流程中的两个关键步骤之一;路径分配的结果对NoC系统的性能尤其是通讯延时有着很重要的影响;多约束条件下的NoC路径分配问题是NP完全问题,要求出其最优解比较困难,目前常用的方法是利用启发式算法求得其较优解;文中提出一种基于云自适应遗传算法的NoC路径分配解决方案,该算法利用云模型对传统遗传算法加以改进,采取新的方法自动调整遗传算法过程中的交叉概率pc和变异概率pm,将适应度与云模型的3个参数Ex、En、He相互结合,从而达到优化遗传算法的目的;将此算法应用于2D-Mesh拓扑结构的NoC中,以平衡链路负载和联合优化为实验目标,以优化静态通讯分配结果;实验证明,文章所采取的算法在平衡链路负载和联合优化方面均取得了良好的效果。     

Bead-based polymerase chain reaction on a microchip

We present a bead-based approach to microfluidic polymerase chain reaction (PCR), enabling fluorescent detection and sample conditioning in a single microchamber. Bead-based PCR, while not extensively investigated in microchip format, has been used in a variety of bioanalytical applications in recent years. We leverage the ability of bead-based PCR to accumulate fluorescent labels following DNA amplification to explore a novel DNA detection scheme on a microchip. The microchip uses an integrated microheater and temperature sensor for rapid control of thermal cycling temperatures, while the sample is held in a microchamber fabricated from (poly)dimethylsiloxane and coated with Parylene. The effects of key bead-based PCR parameters, including annealing temperature and concentration of microbeads in the reaction mixture, are studied to achieve optimized device sensitivity and detection time. The device is capable of detecting a synthetically prepared section of the Bordetella pertussis genome in as few as 10 temperature cycles with times as short as 15?min. We then demonstrate the use of the procedure in an integrated device; capturing, amplifying, detecting, and purifying template DNA in a single microfluidic chamber. These results show that this method is an effective method of DNA detection which is easily integrated in a microfluidic device to perform additional steps such as sample pre-conditioning.     

A power-free deposited microbead plug-based microfluidic chip for whole-blood immunoassay

We present a deposited microbead plug (DMBP)-based microfluidic chip capable of performing plasma extraction and on-chip immunoassay. The DMBP used as a porous blood filter provides pure blood plasma without the contamination of blood cells or beads. Capillary-driven flow eliminates the requirement of external pumps. The human IgG and goat anti-human IgG sample-to-answer assay was performed in this chip within 600 s using only a 10 μl whole-blood sample. This easy-to-use, rapid, inexpensive, and disposable DMBP-based chip holds a great promise for point-of-care application.     

The α- to β-Si3N4 transformation in the presence of liquid silicon

The compacts consisted of , -Si₃N₄ and free silicon are heat treated in the range 1650° C to 1750° C in an argon atmosphere in order to observe the following behaviours; the to phase transformation and variations of the microstructure during heat treatment in silicon nitride. For the microstructural observation of the heat treated specimens, the same grains in the polished surface were investigated before and after eliminating the retained silicon by etching. The to phase transformation, in this case, occurs via silicon melts irrespective of added -Si₃N₄. Both and phases are soluted and precipitated into molten silicon and their morphology are changed from an equiaxed shape to prismatic one. Although elongated grains are precipitated at low temperature or in the early stage of heat treatment, fine precipitated grains are mainly observed with increasing heat treating temperature.     

基于光通信的数据单向导入系统的设计与实现

随着信息网络的日趋成熟,网络信息安全尤其是内网信息安全,越来越受到人们的关注,成为一时研究的热点。其中如何防止在移动存储设备与内网计算机信息交流过程中内网信息流失的问题,显得尤为迫切。为此,本文提出一种基于光通信的数据单向导入系统,为用户提供一种安全地将信息或者数据单向导入到内网的解决方案。利用光的单向性,从传输通道上卡断了反向的可能,有效地保护内网的机密信息不会流失到外部,同时做到良好的人机交互,用户可以任意选择存储设备中的文件发送。     

独立分量分析理论在海底管道漏磁检测中的应用

应用独立分量分析(ICA)方法对海底管道缺陷漏磁法检测中电磁干扰的消除进行了研究，阐述了漏磁检测和负熵法ICA快速算法的原理，应用相应的分析工具研究了试验数据。结果表明，在试验室条件下该方法能很好地分离出缺陷信号和电磁干扰信号。     

SERT结晶器液位控制系统

介绍一种梅山冶金公司板坯连同上应用的新型的结晶器液位控制系统，它由浮式式液位检测装置，ＲＳＥ１０００控制器和电动塞棒执行机构所组成，由法国ＳＥＲＴ公司成套制造。     

磁耦合谐振式无线能量传输的阻抗匹配特性

针对无线电能传输过程中传输效率随匹配阻抗大小变化的特点,提出两种阻抗匹配的方法:一种是基于步进电动机通过检测网络反馈信号,控制网络通过GA神经网络算法控制步进电动机,改变电容实现阻抗匹配;另一种是基于直直变换器中Cuk电路的占空比大小来匹配阻抗的方法.在负载和线圈之间嵌入单相桥式整流电路和Cuk升降压变压器实现匹配.根据最大传输功率理论,定量分析了改变电路的阻抗值大小,使系统的传输功率及效率最大.在MATLAB/Simulink平台验证了两种阻抗匹配设计方案的有效性.结果 表明,利用基于步进电动机和Cuk电路的阻抗匹配方法可以实现最佳阻抗值匹配,使无线电能传输效率最大化.