0.35 μm CMOS T/R Switch for 2.4 GHz Short Range Wireless Applications

This paper describes the design and implementation of a transmit/receive switch for 2.4 GHz ISM band applications. The T/R switch is implemented in a 0.35 m bulk CMOS process and it occupies 150 m · 170 m of die area. A parasitic MOSFET model including bulk resistance is used to optimize the physical dimensions of the transistors with regard to insertion loss and isolation. The measured insertion loss is 1.3 dB without port matching. Simulations using measured s-parameters indicate that an insertion loss of 0.8 dB can be obtained with a conjugate match. The measured isolation is 42 dB and the maximum transmit power is 16 dBm.     

Detection of skin cancer by classification of Raman spectra

Skin lesion classification based on in vitro Raman spectroscopy is approached using a nonlinear neural network classifier. The classification framework is probabilistic and highly automated. The framework includes a feature extraction for Raman spectra and a fully adaptive and robust feedforward neural network classifier. Moreover, classification rules learned by the neural network may be extracted and evaluated for reproducibility, making it possible to explain the class assignment. The classification performance for the present data set, involving 222 cases and five lesion types, was 80.5%+/-5.3% correct classification of malignant melanoma, which is similar to that of trained dermatologists based on visual inspection. The skin cancer basal cell carcinoma has a classification rate of 95.8%+/-2.7%, which is excellent. The overall classification rate of skin lesions is 94.8%+/-3.0%. Spectral regions, which are important for network classification, are demonstrated to reproduce. Small distinctive bands in the spectrum, corresponding to specific lipids and proteins, are shown to hold the discriminating information which the network uses to diagnose skin lesions.     

Constellation Rearrangement: Enhancement for Multilevel Modulation Formats and Transmit Diversity

Radio link adaptivity will be a key feature of the air interfaces of future mobile communication systems. This adaptivity includes techniques such as fast scheduling, hybrid ARQ, transmit diversity and adaptive modulation and coding. The performance of adaptive modulation generally suffers from the power inefficiencies of multilevel modulation formats. This is due to the variations in bit reliabilities caused by the bit-mapping onto the signal constellation. This article presents a concept, called constellation rearrangement (CoRe), which improves the multilevel modulation power efficiency by the joint application with transmit diversity schemes. It is shown by a theoretical analysis for 16-QAM that the presented concept can equalize variations in bit reliabilities by employing different mapping rules for the transmission over the diversity branches. This significantly improves the receiver block error rate performance and, hence, the performance of the adaptive modulation and coding. This is proven by simulations at link-level in a multicarrier CDMA system for AWGN and fading channels employing turbo coded transmission.     

Pulse-driven Josephson digital/analog converter [voltage standard]

The authors have designed and demonstrated a pulse-driven Josephson digital/analog converter. When used as a programmable voltage standard, this device can synthesize metrologically accurate ac waveforms as well as stable dc voltages. We show through simulations that Josephson quantization produces a nearly ideal quantization noise spectrum when a junction is driven with a typical waveform produced by a digital code generator. This technique has been demonstrated in preliminary experiments with arrays of 1000 junctions clocked at frequencies up to 6 Gb/s, where sine waves of a few millivolts in amplitude were synthesized at frequencies up to 1 MHz     

A BIST-DFT technique for DC test of analog modules

Among test techniques for analog circuits, DC test is one of the simplest method for BIST application since easy to integrate test pattern generator and response analyzer are conceivable. Precisely, this paper presents such an investigation for a CMOS operational amplifier that is latter extended to active analog filters. Since the computation of fault coverage is still a controversy question for analog cells, we develop first an evaluation technique for optimizing the tolerance band of the measurements to test. Then, using some DFT solutions we derive single DC pattern and discuss the minimal number of points to test for the detection of defects. A response analyzer is integrated with a Built-in Voltage Sensor (BIVS) and provides directly a logic pass/fail test result. Finally, the extra circuitry introduced by this BIST technique for analog modules does not exceed 5% of the total silicon area of the circuit under test and detects most of the faults.     

新颖的菲亚特1.3 L四气门共轨多次喷射柴油机

菲亚特公司新开发成功的Fiat-1.3 Multijet 16V共轨柴油机是目前市场上最小的四缸共轨轿车柴油机,在现有的800cm3 ～ 1 500cm3排量范围内的柴油机中,该机的比功率(41 kW/L)和比扭矩(144N·m/L)颇为突出.由于采用了诸如四气门、增压中冷、冷却EGR以及与发动机运转工况匹配的喷射次数可变的高压(140MPa)多次喷射(1 ～ 3次)等一系列机内净化措施,在不装用微粒捕集器的情况下已达到欧洲2005年将实施的欧Ⅳ排放法规.同时,该机还具有较高的可靠性和较长的使用寿命,在25万km行驶里程内无需更换任何零件,包括象齿形皮带那样的易损件.该机首先装用于菲亚特的Punto紧凑型轿车上.     

Design of a time-efficient video-goniophotometer combining bidirectional functions assessment for transmission and reflection

A detailed knowledge of the light distribution characteristics through advanced window systems is required to improve the visual comfort of the building's occupants while controlling the propagation of daylight in rooms and the solar gains. An innovative bidirectional goniophotometer has recently been set up for this purpose, using digital image capture and the projection of the emerging light on a diffusing screen. It therefore provides a continuous investigation of the bidirectional transmission figures in a time-efficient way. This instrument was converted into a double-purpose device, allowing both transmission and reflection measurements, which induced several strong constraints due to the conflict of incident and emerging light flux in reflection mode: on one hand the incident beam had to be restricted to the sample area only; on the other hand, as the screen obstructed the incoming light flux in some positions, a special opening in the latter was required. The practical answer to these constraints, detailed in this paper, proved to be reliable, appropriate and efficient.     

The marginal cost of CO2 emissions

Haraden's model for estimating the economic cost of global warming is analysed. We change his method of discounting and some of his input parameters in a manner consistent with physical and economic theory as well as empirical data. We then find much higher costs than Haraden found. These costs are compared to the cost of reducing CO₂ emissions and we find that deep cuts of the emissions of CO₂ are preferable. A check of the sensitivity of our results with respect to some crucial parameter values does not alter that conclusion.     

3-D deformable image registration: a topology preservation scheme based on hierarchical deformation models and interval analysis optimization.

This paper deals with topology preservation in three-dimensional (3-D) deformable image registration. This work is a nontrivial extension of, which addresses the case of two-dimensional (2-D) topology preserving mappings. In both cases, the deformation map is modeled as a hierarchical displacement field, decomposed on a multiresolution B-spline basis. Topology preservation is enforced by controlling the Jacobian of the transformation. Finding the optimal displacement parameters amounts to solving a constrained optimization problem: The residual energy between the target image and the deformed source image is minimized under constraints on the Jacobian. Unlike the 2-D case, in which simple linear constraints are derived, the 3-D B-spline-based deformable mapping yields a difficult (until now, unsolved) optimization problem. In this paper, we tackle the problem by resorting to interval analysis optimization techniques. Care is taken to keep the computational burden as low as possible. Results on multipatient 3-D MRI registration illustrate the ability of the method to preserve topology on the continuous image domain.