Discerning nonstationarity from nonlinearity in seizure-free and preseizure EEG recordings from epilepsy patients

A number of recent studies indicate that nonlinear electroencephalogram (EEG) analyses allow to define a state predictive of an impending epileptic seizure. In this paper, we combine a method for detecting nonlinear determinism with a novel test for stationarity to characterize EEG recordings from both the seizure-free interval and the preseizure phase. We discuss differences between these periods, particularly an increased occurrence of stationary, nonlinear segments prior to seizures. These differences seem most prominent for recording sites within the seizure-generating area and for EEG segments less than one minute's length.     

Multicomponent Physical Vapor Deposited Films with Homogeneous Molecular Material Distribution Featuring Improved Resist Sensitivity

Each film preparation technique affects the physical properties of the resulting coating and thus defines its applicability in modern device construction. In this context solvent based spin coated and solvent‐free physical vapor deposited molecular glass photoresist films are systematically investigated for their dissolution behavior, sensitivity, and overall lithographic performance. These investigations demonstrate that the solvent‐free physical vapor deposition leads to a marked increase in sensitivity. This could be explained by the individual molecule by molecule deposition step producing a more homogeneous distribution of the multicomponent resist system, especially the photoacid generator. In addition, this assumption is supported by former published simulations focusing on aggregate formation within thin films. This work demonstrates that the lithographic sensitivity of multicomponent resist system is an intrinsic parameter to investigate molecular material distribution and indicates that the applied film preparation technique is crucial for the corresponding performance and applicability.     

Continuous and discrete data rebinning in time-of-flight PET

This paper investigates data compression methods for time-of-flight (TOF) positron emission tomography (PET), which rebin the 3-D TOF measurements into a set of 2-D TOF data for a stack of transaxial slices. The goal of this work is to develop rebinning algorithms that are more accurate than the TOF single-slice-rebinning (TOF-SSRB) method proposed by Mullani in 1982. Two approaches are explored. The first one is based on a partial differential equation, which expresses a consistency condition for TOF-PET data with a Gaussian TOF profile. From this equation we derive an analytical rebinning algorithm, which is unbiased in the limit of continuous sampling. The second approach is discrete: each 2-D rebinned data sample is calculated as a linear combination of the 3-D TOF samples in the same axial plane parallel to the axis of the scanner. The coefficients of the linear combination are precomputed by optimizing a cost function which enforces both accuracy and good variance reduction, models the TOF profile, the axial PSF of the LORs, and the specific sampling scheme of the scanner. Measurements of a thorax phantom on a prototype TOF-PET scanner with a resolution of 550 ps show that the proposed discrete method improves the bias-variance trade-off and is a promising alternative to TOF-SSRB when data compression is required to achieve clinically acceptable reconstruction time.     

A Synthetic Dynamic Polyvinyl Alcohol Photoresin for Fast Volumetric Bioprinting of Functional Ultrasoft Hydrogel Constructs

Tomographic volumetric bioprinting (VBP) enables fast photofabrication of cell-laden hydrogel constructs in one step, addressing the limitations of conventional layer-by-layer additive manufacturing. However, existing biomaterials that fulfill the physicochemical requirements of VBP are limited to gelatin-based photoresins of high polymer concentrations. The printed microenvironments are predominantly static and stiff, lacking sufficient capacity to support 3D cell growth. Here a dynamic resin based on thiol–ene photo-clickable polyvinyl alcohol (PVA) and thermo-sensitive sacrificial gelatin for fast VBP of functional ultrasoft cell-laden hydrogel constructs within 7–15 s is reported. Using gelatin allows VBP of permissive hydrogels with low PVA contents of 1.5%, providing a stress-relaxing environment for fast cell spreading, 3D osteogenic differentiation of embedded human mesenchymal stem cells and matrix mineralization. Additionally, site-specific immobilization of molecules-of-interest inside a PVA hydrogel is achieved by 3D tomographic thiol–ene photopatterning. This technique may enable spatiotemporal control of cell-material interactions and guides in vitro tissue formation using programmed cell-friendly light. Altogether, this study introduces a synthetic dynamic photoresin enabling fast VBP of functional ultrasoft hydrogel constructs with well-defined physicochemical properties and high efficiency.     

Advanced Characterization and Optimization of NiOx:Cu-SAM Hole-Transporting Bi-Layer for 23.4% Efficient Monolithic Cu(In,Ga)Se2-Perovskite Tandem Solar Cells

The performance of five hole-transporting layers (HTLs) is investigated in both single-junction perovskite and Cu(In, Ga)Se₂ (CIGSe)-perovskite tandem solar cells: nickel oxide (NiO_x,), copper-doped nickel oxide (NiO_x:Cu), NiO_x+SAM, NiO_x:Cu+SAM, and SAM, where SAM is the [2-(3,-6Dimethoxy-9H-carbazol-9yl)ethyl]phosphonic acid (MeO-2PACz) self-assembled monolayer. The performance of the devices is correlated to the charge-carrier dynamics at the HTL/perovskite interface and the limiting factors of these HTLs are analyzed by performing time-resolved and absolute photoluminescence ((Tr)PL), transient surface photovoltage (tr-SPV), and X-ray/UV photoemission spectroscopy (XPS/UPS) measurements on indium tin oxide (ITO)/HTL/perovskite and CIGSe/HTL/perovskite stacks. A high quasi-Fermi level splitting to open-circuit (QFLS-V_oc) deficit is detected for the NiO_x-based devices, attributed to electron trapping and poor hole extraction at the NiO_x-perovskite interface and a low carrier effective lifetime in the bulk of the perovskite. Simultaneously, doping the NiO_x with 2% Cu and passivating its surface with MeO-2PACz suppresses the electron trapping, enhances the holes extraction, reduces the non-radiative interfacial recombination, and improves the band alignment. Due to this superior interfacial charge-carrier dynamics, NiO_x:Cu+SAM is found to be the most suitable HTL for the monolithic CIGSe-perovskite tandem devices, enabling a power-conversion efficiency (PCE) of 23.4%, V_oc of 1.72V, and a fill factor (FF) of 71%, while the remaining four HTLs suffer from prominent V_oc and FF losses.     

Modeling of Ethylene Absorption from an Ethylene–Ethane Mixture by Silver Nitrate Aqueous Solution in a Hollow-Fiber Membrane Contactor

Convection–diffusion mass transfer in a gas–liquid membrane contactor based on porous polysulfone hollow fiber membranes with a mesoporous (d_pore ~ 2 nm) structure of the separation layer has been studied. The characteristics of the membrane contactor have been investigated in the recovery of ethylene from its mixture with ethane using an aqueous silver nitrate solution as the absorption liquid. A procedure based on the method of lines is proposed for calculating a mass transfer in hollow fiber contactor with a longitudinal laminar flow in an array of parallel fibers. An ethylene flux, depending on the process conditions, has been found by solving numerically a set of convection–diffusion equations with allowance for both the chemical reaction in the liquid stream and transmembrane transport.     

A Complete Separation of Hexane Isomers by a Functionalized Flexible Metal Organic Framework

The separation ability of branched alkane isomers (nHEX, 3MP, 22DMB) of the flexible and functionalized microporous iron(III) dicarboxylate MIL‐53(Fe)‐(CF₃)₂ solid is evaluated through a combination of breakthrough experiments (binary or ternary mixtures), adsorption isotherms, X‐ray diffraction temperature analysis, quasi‐elastic neutron scattering measurements and molecular dynamics simulations. A kinetically controlled molecular sieve separation between the di‐branched isomer of hexane 22DMB from a mixture of paraffins is achieved. The reported total separation between mono‐ and di‐branched alkanes which was neither predicted nor observed so far in any class of porous solids is spectacular and paves the way towards a potential unprecedented upgrading of the RON of gasoline.     

Photovoltaic Devices: Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post‐Treatment for ITO‐Free Organic Solar Cells (Adv. Funct. Mater. 6/2011)

Highly conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as stand‐alone electrodes for organic solar cells have been optimized using a solvent post‐treatment method. The treated PEDOT:PSS films show enhanced conductivities up to 1418 S cm^?1, accompanied by structural and chemical changes. The effect of the solvent treatment on PEDOT:PSS has been investigated in detail and is shown to cause a reduction of insulating PSS in the conductive polymer layer. Using these optimized electrodes, ITO‐free, small molecule organic solar cells with a zinc phthalocyanine (ZnPc):fullerene C₆₀ bulk heterojunction have been produced on glass and PET substrates. The system was further improved by pre‐heating the PEDOT:PSS electrodes, which enhanced the power conversion efficiency to the values obtained for solar cells on ITO electrodes. The results show that optimized PEDOT:PSS with solvent and thermal post‐treatment can be a very promising electrode material for highly efficient flexible ITO‐free organic solar cells.