Real filter based on Mellin radial harmonics for scale-invariant pattern recognition

Several theoretical and experimental studies are developed in order to simplify the construction of filters based on Mellin radial harmonics (MRH) for scale-invariant pattern recognition. A real filter based on MRH is designed. The impulse response of the filter is a hermitic function, obtained by a suitable modification of a MRH component. This real filter has the same scale invariance as the conventional complex MRH filters, with the main advantage of its simplicity. Both computer simulations and optical experiments are presented.     

Color encoding for polychromatic single-channel optical pattern recognition

The common multichannel system for recognizing colored images is replaced by a color-encoded single-channel system. Amethod inspired by the Munsell color system is used for encoding the different colors as phase and amplitude functions. It is shown that for many practical cases the phase information part of the color code is sufficient for obtaining good results. An implementation based on a liquid-crystal television panel that works in a phase-modulation mode is suggested. Computer simulations that demonstrate the capabilities of the suggested method are given as well as a comparison with previously published multichannel performance.     

Application of virtual reality for peritoneal dialysis exchange learning in patients with end-stage renal disease and cognitive impairment

Virtual Reality - Cognitive impairment is not uncommon in patients with end-stage renal disease and can make it more difficult for these patients to carry out peritoneal dialysis (PD) on their own....     

Design Optimization of Composite Prosthetic Tubes Using GA-ANN Algorithm Considering Tsai-Wu Failure Criteria

The investigation of possible failures in composite materials is a matter of very great importance, and the Tsai-Wu criterion is an effective criterion for analyzing those flaws in anisotropic materials and defining whether the material at a given load will or will not suffer structural failure. In this study, an optimization procedure is proposed to minimize the maximum value of Tsai-Wu of laminated composite tubes subject to axial loading. Artificial neural networks and genetic algorithms are chosen as optimization tools. The results of this study show that the developed algorithm converges faster. Then, the maximum Tsai-Wu value is used as the objective function and the fiber orientations are the constraints in the optimization process. The results yielded by them are compared and discussed. Optimal results are compared with respect to the usual initial design. The design approach is recommended for structures where composites are the key load-carrying members such as orthopedic prosthesis.     

Quality of life development during initial hemodialysis therapy and association with loss of residual renal function

Introduction: Health related quality of life (HRQOL) is markedly reduced in hemodialysis patients compared to the general population. We investigated the course of self‐reported HRQOL over time and the association with selected factors, focusing on changes in glomerular filtration rate (GFR). Methods: Eighty‐two newly started hemodialysis patients from the SAFIR cohort filled out the Kidney Disease Quality of Life Short Form Version 1.3 (KDQOL‐SF^TM) questionnaire at baseline, 6 and 12 months. The SAFIR study was a randomized, placebo‐controlled, double‐blind intervention study, examining the effects of the angiotensin II receptor blocker irbesartan. HRQOL was a secondary outcome measure. Main inclusion criteria: Dialysis vintage <1 year, left ventricular ejection fraction >30% and urinary output >300 mL/day. GFR was measured with mean creatinine and urea clearance from 24‐hour urine collections at baseline, 6 and 12 months. Findings: Irbesartan treatment did not affect HRQOL. Patients were pooled into one group for further analyses. Decline in GFR correlated significantly with decreasing HRQOL over time. HRQOL was stable over time, with a slight nonsignificant tendency toward improved HRQOL. The largest HRQOL‐differences (positive values equal improved HRQOL) observed during the 12 month study period were (mean[95% confidence interval]): Burden of kidney disease:6.4[?2.2;15.0], Role limitations‐physical:12.7[?2.1;27.5], and Role limitations‐emotional:9.7[?5.2;24.6]. Comorbidity, especially diabetes, hospital admissions, female gender, and age were strongly associated with lower HRQOL in cross sectional analysis. Discussion: Preservation of residual renal function seems to be important for HRQOL. In newly started HD patients, HRQOL showed little change after 12 months. HRQOL was negatively affected by comorbidity, especially diabetes, hospital admissions, female gender, and age.     

A generalized layerwise higher-order shear deformation theory for laminated composite and sandwich plates based on isogeometric analysis

This paper presents a generalized layerwise higher-order shear deformation theory for laminated composite and sandwich plates. We exploit a higher-order shear deformation theory in each layer such that the continuity of the displacement and transverse shear stresses at the layer interfaces is ensured. Thanks for enforcing the continuity of the displacement and transverse shear stresses at an inner-laminar layer, the minimum number of variables is retained from the present theory in comparison with other layerwise theories. The method requires only five variables, the same as what obtained from the first- and higher-order shear deformation theories. In comparison with the shear deformation theories based on the equivalent single layer, the present theory is capable of producing a higher accuracy for inner-laminar layer shear stresses. The free boundary conditions of transverse shear stresses at the top and bottom surfaces of the plate are fulfilled without any shear correction factors. The discrete system equations are derived from the Galerkin weak form, and the solution is obtained by isogeometric analysis (IGA). The discrete form requires the C¹ continuity of the transverse displacement, and hence NURBS basis functions in IGA naturally ensure this condition. The laminated composite and sandwich plates with various geometries, aspect ratios, stiffness ratios and boundary conditions are studied. The obtained results are compared with the 3D elasticity solution, the analytical as well as numerical solutions based on various plate theories.     

X‐ray diffraction (XRD)‐studies on the temperature dependent interface reactions on hafnium,zirconium, and nickel coated monocrystalline diamonds used in grinding segments for stone and concrete machining

Diamond impregnated metal matrix composites are the state of the art solution for the machining of mineral materials. The type of interface reactions between the metal matrix and diamond surface has an essential influence on the tool performance and durability. To improve the diamond retention, the diamonds can be coated by physical vapour deposition with metallic materials, which enforce interface reactions. Hence, this paper focuses on the investigation of the interfacial area on metal‐coated monocrystalline diamonds. Hafnium and zirconium, both known as carbide forming elements, are used as coating materials. The third coating, which is used to determine its catalytic influences when applied as a physical vapour deposition (PVD)‐layer, is nickel. Additionally, the coated diamond samples were heat‐treated to investigate the starting point of the formation of new phases. X‐ray diffraction‐analyses revealed the assumed carbide formation on hafnium and zirconium coated samples. The formation temperature was identified between 800 °C and 1000 °C for hafnium and zirconium coatings.     

Engineered Multifunctional Albumin‐Decorated Porous Silicon Nanoparticles for FcRn Translocation of Insulin

The last decade has seen remarkable advances in the development of drug delivery systems as alternative to parenteral injection‐based delivery of insulin. Neonatal Fc receptor (FcRn)‐mediated transcytosis has been recently proposed as a strategy to increase the transport of drugs across the intestinal epithelium. FcRn‐targeted nanoparticles (NPs) could hijack the FcRn transcytotic pathway and cross the epithelial cell layer. In this study, a novel nanoparticulate system for insulin delivery based on porous silicon NPs is proposed. After surface conjugation with albumin and loading with insulin, the NPs are encapsulated into a pH‐responsive polymeric particle by nanoprecipitation. The developed NP formulation shows controlled size and homogeneous size distribution. Transmission electron microscopy (TEM) images show successful encapsulation of the NPs into pH‐sensitive polymeric particles. No insulin release is detected at acidic conditions, but a controlled release profile is observed at intestinal pH. Toxicity studies show high compatibility of the NPs with intestinal cells. In vitro insulin permeation across the intestinal epithelium shows approximately fivefold increase when insulin is loaded into FcRn‐targeted NPs. Overall, these FcRn‐targeted NPs offer a toolbox in the development of targeted therapies for oral delivery of insulin.