CAC-OLSR: Extending OLSR to Provide Admission Control in Wireless Mesh Networks

This work presents an admission control mechanism for multi-hop wireless mesh networks based on the IEEE 802.11 standard and the OLSR routing protocol. This mechanism, called CAC-OLSR, aims at ensuring that traffic flows with quality of service (QoS) requirements, especially voice and video, are only admitted in the mesh network if it has available resources in order to provide flow requirements. In addition, QoS requirements of previously admitted traffic flows cannot be violated. The proposal was evaluated with NS-2 and Evalvid simulations.     

Performance analysis and comparison of optical signal processing beamforming networks: a survey

Photonic Network Communications - Forthcoming wireless systems are developed to support greater data rate and extra coverage area. This can be achieved with the help of multiple input multiple...     

CdTe/CdS thin film solar cells grown in substrate configuration

The ability to grow efficient CdTe/CdS solar cells in substrate configuration would not only allow for the use of non‐transparent and flexible substrates but also enable a better control of junction formation. Yet, the problems of barrier formation at the back contact as well as the formation of a p–n junction with reduced recombination losses have to be solved. In this work, CdTe/CdS solar cells in substrate configuration were developed, and the results on different combinations of back contact materials are presented. The Cu content in the electrical back contact was found to be a crucial parameter for the optimal CdCl₂‐treatment procedure. For Cu‐free cells, two activation treatments were applied, whereas Cu‐containing cells were only treated once after the CdTe deposition. A recrystallization behavior of the CdTe layer upon its activation similar to superstrate configuration was found; however, no CdTe–CdS intermixing could be observed when the layers were treated consecutively. Remarkably high V_OC and fill factor of 768 mV and 68.6%, respectively, were achieved using a combination of MoO₃, Te, and Cu as back contact buffer layer resulting in 11.3% conversion efficiency. With a Cu‐free MoO₃/Te buffer material, a V_OC of 733 mV, a fill factor of 62.3%, and an efficiency of 10.0% were obtained. Copyright © 2012 John Wiley & Sons, Ltd.     

Mediated Electrochemistry to Mimic Biology's Oxidative Assembly of Functional Matrices

Biology uses diffusible oxidants to perform functions that range from signaling to matrix assembly, and these oxidation chemistries offer surprising selectivities. Here, it is reported that mediated electrochemistry can access the richness of such oxidation chemistries. Specifically, electrode‐imposed voltage inputs are used to locally generate oxidized mediators that can diffuse into polymer solutions and induce the formation of covalent bonds for the deposition and functionalization of hydrogels at the electrode surface. Depending on the mediator's redox potential (E⁰), it is possible to “gate” the voltage inputs to target specific residues (e.g., thiols or amines) and oxidation chemistries. Further, mediators of varying E⁰ offer different reactivities and thus allow control of reaction‐diffusion rates to modulate the hydrogel's crosslink density and mechanical properties. Importantly, this mediated oxidation can be performed under physiologically relevant conditions to preserve labile biological functionalities (e.g., cell viability and protein function). Finally, it is demonstrated that protein fusion tags can be engineered to have “targetable” amino acid residues that enable protein function to be oxidatively conjugated to electrodeposited hydrogels. In summary, mediated electrochemistry can engage orthogonal oxidation chemistries to create functionalized matrices and thus mediated electrochemistry should add important capabilities to the electrofabrication toolbox.     

Elucidating the challenges for the praxis of fog computing: An aspect‐based study

The evolutionary advancements in the field of technology have led to the instigation of cloud computing. The Internet of Things paradigm stimulated the extensive use of sensors distributed across the network edges. The cloud datacenters are assigned the responsibility for processing the collected sensor data. Recently, fog computing was conceptuated as a solution for the overwhelmed narrow bandwidth. The fog acts as a complementary layer that interplays with the cloud and edge computing layers, for processing the data streams. The fog paradigm, as any distributed paradigm, has its set of inherent challenges. The fog environment necessitates the development of management platforms that effectuates the orchestration of fog entities. Owing to the plenitude of research efforts directed toward these issues in a relatively young field, there is a need to organize the different research works. In this study, we provide a compendious review of the research approaches in the domain, with special emphasis on the approaches for orchestration and propose a multilevel taxonomy to classify the existing research. The study also highlights the application realms of fog computing and delineates the open research challenges in the domain.     

3D printing as a means of learning and communication: The 3Ducation project revisited

This research project explores to what extent the utilization of open-source 3D printers and 3D design software could serve as means of learning and communication. The principles of non-formal education aligned with the concept of constructionism are used to create an experimental educational scenario focused on geocultural tourism for persons with visual impairments. This paper documents our experience and presents our findings from a 25-day long project, which took place in Zagori, northwestern Greece. 11 high school students from Portugal designed and manufactured natural and cultural heritage artifacts carrying messages in the Braille language. The objects were then handed to people with visual impairments with a twofold aim. First, to enable the communication among persons with and without visual impairments; and, second, to empower students to participate in training projects through open educational procedures. We conclude that open educational practices can boost students’ active engagement in educational processes. Finally, 3D printing encourages a meaningful communication among people with and without visual impairments via the tangible exploration of geocultural components.     

A Novel Buffering Technique for Aqueous Processing of Zinc Oxide Nanostructures and Interfaces,and Corresponding Improvement of Electrodeposited ZnO‐Cu2O Photovoltaics

A novel buffering method is presented to improve the stability of zinc oxide processed in aqueous solutions. By buffering the aqueous solution with a suitable quantity of sacrificial zinc species, the dissolution of functional zinc oxide structures and the formation of unwanted impurities can be prevented. The method is demonstrated for ZnO films and nanowires processed in aqueous solutions used for the selective etching of mesoporous anodic alumina templates and the electrochemical deposition of Cu₂O. In both cases, improved ZnO stability is observed with the buffering method. ZnO‐Cu₂O heterojunction solar cells (bilayer and nanowire cells) synthesized using both traditional and buffered deposition methods are characterized by impedance spectroscopy and solar simulation measurements. Buffering the Cu₂O deposition solution is found to reduce unwanted recombination at the heterojunction and improve the photovoltaic performance.     

Layer‐by‐Layer All‐Inorganic Quantum‐Dot‐Based LEDs: A Simple Procedure with Robust Performance

A novel all‐inorganic electroluminescent device is demonstrated based on highly luminescent CdTe nanocrystals intercalated within a laminar hydrotalcite‐like structure. The laminar scaffold acts to both support and distribute the CdTe nanocrystals. The device is synthesized using simple wet chemical processes at room temperature in ambient conditions. It has high thermal stability, operating continuously up to 90 °C, and a maximum efficiency at J = 0.12 A cm^?2. The device is targeted at the automotive industry.     

A Gunn-Diode Active Leaky-Wave Frequency Scanning Antenna

A frequency tunable active leaky-wave scanning antenna using Gunn-diode voltage control oscillator (VCO) as source is developed. The frequency tuning controlled by changing either the varactor diode dc bias or the Gunn diode dc bias is demonstrated. The measured scanning angle of active antenna is close to 15 degree as the Gunn VCO frequency tuned from 12.58GHz to 12.98GHz. To excite the first higher order mode of the microstrip leaky-wave antenna is fed asymmetrically. The dominant mode excitation has been successfully suppressed by adding a sequence of covered wire in the middle line of the microstrip leaky wave antenna. This is a prototype of frequency scanning antenna using two terminal device, which can be easily scaled up to millimeter wave frequency region.