Ammoniaksynthese als Beispiel einer stofflichen Nutzung von intermittierend erzeugtem Wasserstoff

Producing hydrogen‐rich chemicals, such as methane, ammonia or methanol, from renewable energy may foster the integration of renewables into the current energy system. Here, a flexible ammonia synthesis concept is introduced, which is then compared to the widely discussed power‐to‐gas concepts on a technical and economic level. The current ammonia prices result in comparably high hydrogen‐specific revenues, which imply the ability to operate the system more profitable under fluctuating electricity prices and thereby increase the plant capacity factor.     

Creep compliance mapping by atomic force microscopy

We present a method for mapping the spatial distribution of viscoelastic properties of heterogeneous samples using the atomic force microscope (AFM). By applying a force step load protocol to induce time dependent sample indentations we measured the local creep compliance of the sample. The creep compliance was quantified in terms of the standard linear solid model to give maps of the instant glassy modulus, the equilibrium rubbery modulus, and the retardation time. To reduce the influence of plastic deformations, the sample was preformed with an initial preload step. Different polymer samples with a homogeneous or a heterogeneous material composition on a microscopic scale were investigated.     

Solid-state reorganization,melting and melt-recrystallization of conformationally disordered crystals (α′-phase) of poly (l-lactic acid)

Conformationally disordered α′-crystals of poly (l-lactic acid) were formed by crystallization of the melt at high supercooling at 95 °C. Analysis of their melting temperature as a function of the crystallinity revealed absence of crystal thickening during isothermal crystallization. Annealing of α′-crystals between the crystallization temperature of 95 °C and their zero-entropy production melting temperature of 150 °C leads to their stabilization, mainly by solid-state reorganization. Heating faster than 30 K s⁻¹ suppresses reorganization and permits superheating of the α′-phase. Consequently, isothermal melting followed by melt-recrystallization becomes accessible. Melting is completed within few hundreds of milliseconds, and melt-recrystallization is about two orders of magnitude faster than crystallization of the isotropic melt at identical temperature. The time required for melting decreases with superheating and increases with the lateral dimension of the lamellar crystals. Laterally extended lamellae require long time for melting of the outer crystal layers, which allows stabilization of the central crystal part. These crystal remnants then serve as seed for immediate recrystallization. In case of complete melting of smaller lamellae, melt-recrystallization is retarded but still distinctly faster than cold- and melt-crystallization, due to incomplete isotropization of the melt.     

Powder coating of veneered particle board surfaces by hot pressing

The powder coating of veneered particle boards by the sequence electrostatic powder application – powder curing via hot pressing is studied in order to create high gloss surfaces. To obtain an appealing aspect, veneer sheets were glued by heat and pressure on top of particle boards and the resulting surfaces were used as carrier substrates for powder coat finishing. Prior to the powder coating, the veneered particle board surfaces were pre-treated by sanding to obtain good uniformity and the boards were stored in a climate chamber at controlled temperature and humidity conditions to adjust an appropriate electrical surface resistance. Characterization of surface texture was done by 3D microscopy. The surface electrical resistance was measured for the six veneers before and after their application on the particle board surface. A transparent powder top-coat was applied electrostatically onto the veneered particle board surface. Curing of the powder was done using a heated press at 130 °C for 8 min and a smooth, glossy coating was obtained on the veneered surfaces. By applying different amounts of powder the coating thickness could be varied and the optimum amount of powder was determined for each veneer type.     

Influence of Reaction Conditions on the Settling Behavior of Liquid-Liquid Dispersions

The settling behavior of liquid-liquid dispersions at ambient temperature and pressure is well investigated. However, little is known about the settling behavior of those systems at high pressure and high temperature. In this work, a novel stainless steel settling cell is presented, enabling investigations on liquid-liquid settling behavior at high pressures up to 130 bar. The settling behavior of a promising CO₂ hydrogenation reaction system is investigated by sequentially determining influences of dissolved CO₂, side components, and temperature.     

Bifunctional DNA Duplexes Permit Efficient Incorporation of pH Probes into Liposomes

Enzyme-mediated proton transport across biological membranes is critical for many vital cellular processes. pH-sensitive fluorescent dyes are an indispensable tool for investigating the molecular mechanism of proton-translocating enzymes. Here, we present a novel strategy to entrap pH-sensitive probes in the lumen of liposomes that has several advantages over the use of soluble or lipid-coupled probes. In our approach, the pH sensor is linked to a DNA oligomer with a sequence complementary to a second oligomer modified with a lipophilic moiety that anchors the DNA conjugate to the inner and outer leaflets of the lipid bilayer. The use of DNA as a scaffold allows subsequent selective enzymatic removal of the probe in the outer bilayer leaflet. The method shows a high yield of insertion and is compatible with reconstitution of membrane proteins by different methods. The usefulness of the conjugate for time-resolved proton pumping measurements was demonstrated by using two large membrane protein complexes.     

Improved thin film stability of differently formulated,printed, and crosslinked polymer layers against successive solvent printing

Interface control remains a top challenge of solution-processed organic light emitting diodes (OLED) stacks since the device performance heavily relies on it. Film stability of an inkjet deposited and crosslinked layer against subsequent exposure to a suitable inkjet printed solvent has been investigated. Impact of processing solvent (solvent used to prepare the polymer layer) on solution-cast thin film properties has already been shown for polymer films. To our knowledge, this study is the first one analyzing thin films stability against solvent exposure using technology relevant materials processed via inkjet printing (IJP). The outcome of this research showed that the stability of the crosslinked films is affected by the solvent used for ink formulation. These findings are of great interest for multilayered semiconductors devices, such as OLEDs, field-effect transistors and dye-sensitized solar cells. Differential scanning calorimetry (DSC) was used to quantify the efficiency of the polymer crosslinking reaction in pure powder and in thin films, as processed from different solvents. Crosslinking efficiency measured by DSC correlated well with the deformation induced by the solvent and observed on layer surfaces. The interaction in solution between polymer and solvent has also been evaluated to explain its impact on thin film stability against successive solvent printing. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48895.     

The Role of mTOR and eIF Signaling in Benign Endometrial Diseases

Adenomyosis, endometriosis, endometritis, and typical endometrial hyperplasia are common non-cancerous diseases of the endometrium that afflict many women with life-impacting consequences. The mammalian target of the rapamycin (mTOR) pathway interacts with estrogen signaling and is known to be dysregulated in endometrial cancer. Based on this knowledge, we attempt to investigate the role of mTOR signaling in benign endometrial diseases while focusing on how the interplay between mTOR and eukaryotic translation initiation factors (eIFs) affects their development. In fact, mTOR overactivity is apparent in adenomyosis, endometriosis, and typical endometrial hyperplasia, where it promotes endometrial cell proliferation and invasiveness. Recent data show aberrant expression of various components of the mTOR pathway in both eutopic and ectopic endometrium of patients with adenomyosis or endometriosis and in hyperplastic endometrium as well. Moreover, studies on endometritis show that derangement of mTOR signaling is linked to the establishment of endometrial dysfunction caused by chronic inflammation. This review shows that inhibition of the mTOR pathway has a promising therapeutic effect in benign endometrial conditions, concluding that mTOR signaling dysregulation plays a critical part in their pathogenesis.     

SARS-CoV-2 Spike Protein Binding of Glycated Serum Albumin—Its Potential Role in the Pathogenesis of the COVID-19 Clinical Syndromes and Bias towards Individuals with Pre-Diabetes/Type 2 Diabetes and Metabolic Diseases

The immune response to SARS-CoV-2 infection requires antibody recognition of the spike protein. In a study designed to examine the molecular features of anti-spike and anti-nucleocapsid antibodies, patient plasma proteins binding to pre-fusion stabilised complete spike and nucleocapsid proteins were isolated and analysed by matrix-assisted laser desorption ionisation–time of flight (MALDI-ToF) mass spectrometry. Amongst the immunoglobulins, a high affinity for human serum albumin was evident in the anti-spike preparations. Careful mass comparison revealed the preferential capture of advanced glycation end product (AGE) forms of glycated human serum albumin by the pre-fusion spike protein. The ability of bacteria and viruses to surround themselves with serum proteins is a recognised immune evasion and pathogenic process. The preference of SARS-CoV-2 for AGE forms of glycated serum albumin may in part explain the severity and pathology of acute respiratory distress and the bias towards the elderly and those with (pre)diabetic and atherosclerotic/metabolic disease.