The pipeline bus: An interconnection network for multiprocessor systems

The design of a network switch for synchronously clocked packet switching networks is presented. The switch includes the node interface and logic handling of the arbitration and routing for a large class of network topologies, namely n-dimensional rectangular grids including hypercubes and other highly efficient topologies. In the context of the SUPRENUM project the paper concentrates on two-dimensional meshes. Routing, arbitration, blocking, and fault tolerance issues are discussed.     

Synthesis and Characterization of Cross‐linked Carboxymethyl Potato Starch Ether Gels

Hydrogels were synthesized by cross‐linking of potato starch (PS) with dichloroacetic acid (DCA) in the presence of monochloroacetic acid (MCA) to form etherified carboxymethyl starch (CMS) gels, to be used for ultrasonic medical examinations. By etherification cross‐linked CMS‐hydrogels can be produced, that are stable in contrast to the in the long‐term unstable esterified gels, that were presented in the last paper. The rheological benchmarks for the CMS‐hydrogels were set in comparison with synthetic ultrasonic gels. Gels with potato starch contents in the reaction batch ranging from 12.5% to 20% showed the best compliance with the benchmark parameters. The DS values of these CMS‐hydrogels vary from 0.42 to 0.49, increasing with decreasing amount of starch in the reaction mixture. The free swelling capacities (FSC) vary between 77 g/g for the 12.5% PS‐gel and 34 g/g for 20% PS‐gel, the turbidities of the samples being in the range from 14.5 NTU (Nephelometric Turbidity Units) (12.5% PS) up to 20.5 NTU (20% PS). The variation of the PS fraction in the reaction mixture showed that with an increased amount of PS in the reaction batch the number of cross‐links of the CMS‐gels increases, too. At a higher number of cross‐links the swelling capacity is reduced and the concentration needed to form stable hydrogels is greatly increased. Thus a hydrogel of a polymer concentration of 5 mass‐% from a 12.5% PS batch was produced, that showed the best accordance with the rheological benchmark parameters such as gelatinization time, visco‐elastic and pseudoplastic properties and long‐term stability. The ultrasonic pictures taken with this CMS‐gel were not different from those taken with the synthetic gels. This hydrogel was then subjected to long‐term‐stability measurements performed over one year and to rheological temperature cycle tests. The tests showed that the long‐term stability of the gels is sufficient for their use as ultrasonic gel.     

Hydrodechlorination and hydrogenation of aromatic compounds over palladium on alumina in hydrogen-saturated water

The catalytic transformations of 1,2-dichlorobenzene, chlorobenzene, 4-chlorobiphenyl, γ-hexachlorocyclohexane (Lindane), naphthalene and phenanthrene were studied over palladium on alumina in hydrogen-saturated water (Pd/Al₂O₃/H₂) at room temperature and ambient pressure. The chlorinated benzenes were rapidly hydrodechlorinated and Lindane was dehydrochlorinated to benzene. Partial or complete hydrogenation was observed for biphenyl and the polycyclic aromatic hydrocarbons. The phenanthrene ring was cleaved at the 9,10-position. In general dechlorination reactions were faster than hydrogenation reactions.     

Media photo‐degradation in pharmaceutical biotechnology – impact of ambient light on media quality,cell physiology,and IgG production in CHO cultures

BACKGROUND

Many vital components in bioprocess media are prone to photo‐conversion or photo‐degradation upon exposure to ambient light, with severe negative consequences for biomass yield and overall productivity. However, there is only limited awareness of light irradiation as a potential risk factor when working in transparent glass bioreactors, storage vessels or disposable bag systems. The chemical complexity of most media renders a root‐cause analysis difficult. This study investigated in a novel, holistic approach how light‐induced changes in media composition relate to alterations in radical burden, cell physiology, morphology, and product formation in industrial Chinese hamster ovary (CHO) bioprocesses.

RESULTS

Two media formulations from proprietary and commercial sources were tested in a pre‐hoc light exposure scenario prior to cultivation. Using fluorescence excitation/emission (EEM) matrix spectroscopy, a photo‐sensitization of riboflavin was identified as a likely cause for drastically decreased IgG titers (up to ?80%) and specific growth rates (?50% to ?90%). Up to three‐fold higher radical levels were observed in photo‐degraded medium. On the biological side, this resulted in significant changes in cell morphology and aberrations in the normal IgG biosynthesis/secretion pathway.

CONCLUSION

These findings clearly illustrate the underrated impact of room light after only short periods of exposure, occurring accidentally or knowingly during bioprocess development and scale‐ up. The detrimental effects, which may share a common mechanistic cause at the molecular level, correlate well with changes in spectroscopic properties. This offers new perspectives for online monitoring concepts, and improved detectability of such effects in future. © 2018 The Authors. Journal of Chemical Technology & Biotechnology published by JohnWiley & Sons Ltd on behalf of Society of Chemical Industry.

     

Effect of inter-plies on the short beam shear delamination of steel/composite hybrid laminates

Interlaminar shear test methods (ILS) were implemented to characterize the delamination behavior of asymmetric steel/carbon fiber reinforced plastic (CFRP) hybrids. To improve the delamination behavior thermoplastic inter-plies were inserted between CFRP and steel. Supported by optical strain measurement the maximum shear stress (τ_MAX), the shear stress at interfacial delamination (τ_IF) and the shear stress at large-scale CFRP ply delamination τ_D were evaluated. The significant effect of inter-plies on the adhesion was best reflected by the shear stress value at interfacial delamination. Finite element analysis of the actual shear stress distribution in an asymmetric hybrid sample without inter-ply revealed that the calculated shear strength is just slightly overestimated compared to the standardized evaluation procedure.     

Fluidized bed spray granulation: Investigation of the coating process on a single sphere

The coating and granulation of solid particles in a fluidized bed is a process which converts pumpable and atomizable liquids (solutions, slurries, melts) into granular solids in one step by means of drying. The solution to be processed is sprayed onto a fluidized bed. Particle growth can take place either via surface layering or agglomeration. In the case of surface layering the atomized droplets deposit a thin layer of liquid onto the seed particles. The solvent is then evaporated by the hot fluidizing, leaving behind the dissolved material on the surface. Although fluidized bed spray granulation and film coating have been applied in industry for several years, there is still a lack of understanding of the physical fundamentals and the mechanisms by which spherical granules are formed. Hence a new method was developed which allows the direct observation of the subsequent particle-forming mechanisms such as droplet deposition, spreading, wetting and drying. The authors present a laboratory scale apparatus in which a single freely suspended particle can be coated under well defined and constant coating and drying conditions. With this device, particle-growth-rate and the development of particle morphology were measured and investigated under various experimental conditions.     

An increased fluid intake leads to feet swelling in 100-km ultra-marathoners - an observational field study

Background

An association between fluid intake and changes in volumes of the upper and lower limb has been described in 100-km ultra-marathoners. The purpose of the present study was (i) to investigate the association between fluid intake and a potential development of peripheral oedemas leading to an increase of the feet volume in 100-km ultra-marathoners and (ii) to evaluate a possible association between the changes in plasma sodium concentration ([Na⁺]) and changes in feet volume.

Methods

In seventy-six 100-km ultra-marathoners, body mass, plasma [Na⁺], haematocrit and urine specific gravity were determined pre- and post-race. Fluid intake and the changes of volume of the feet were measured where the changes of volume of the feet were estimated using plethysmography.

Results

Body mass decreased by 1.8 kg (2.4%) (p < 0.0001); plasma [Na⁺] increased by 1.2% (p < 0.0001). Haematocrit decreased (p = 0.0005). The volume of the feet remained unchanged (p > 0.05). Plasma volume and urine specific gravity increased (p < 0.0001). Fluid intake was positively related to the change in the volume of the feet (r = 0.54, p < 0.0001) and negatively to post-race plasma [Na⁺] (r = -0.28, p = 0.0142). Running speed was negatively related to both fluid intake (r = -0.33, p = 0.0036) and the change in feet volume (r = -0.23, p = 0.0236). The change in the volume of the feet was negatively related to the change in plasma [Na⁺] (r = -0.26, p = 0.0227). The change in body mass was negatively related to both post-race plasma [Na⁺] (r = -0.28, p = 0.0129) and running speed (r = -0.34, p = 0.0028).

Conclusions

An increase in feet volume after a 100-km ultra-marathon was due to an increased fluid intake.