Modification of hydrophobic/hydrophilic properties of Vulcan XC72 carbon powder by grafting of trifluoromethylphenyl and phenylsulfonic acid groups

Carbon supports (glassy carbon and Vulcan XC72 powder) were modified by electrochemical and spontaneous grafting of phenylsulfonic acid (PSA) or trifluoromethylphenyl (TFMP) groups via diazonium ion reduction. The effectiveness of the grafting was confirmed electrochemically, by XPS measurements and elemental analyses. The hydrophobic or hydrophilic character of carbon surfaces was evidenced by measuring the contact angles of drops of different liquids (water, ethylene glycol and glycerol) in heptane. The surface energy was calculated and it was found, for example, that spontaneous grafting of a glassy carbon surface by PSA groups led to an increase by a factor 20 of the surface energy compared with an unmodified glassy carbon surface. The study of the grafting of such groups on XC72 carbon powder indicated that a very low grafting ratio (in wt%) led to a significant change in the macroscopic properties of the powder. Thermogravimetric analysis coupled with mass spectroscopy measurements (TGA-MS) showed that these grafted layers were thermally stable even in the presence of dispersed platinum nanoparticles. It was shown by cyclic voltammetry that the carbon substrate modification did not affect the electrochemical behavior of platinum catalyst, since the same active surface area was determined on Pt-XC72, Pt-PSA-XC72 and Pt-TFMP-XC72 catalysts.     

Spark plasma sintering of double-walled carbon nanotubes

Bulk samples of double-walled carbon nanotubes are prepared for the first time. The best spark plasma sintering conditions are (1100 °C, 100 MPa). Raman spectroscopy and scanning electron microscopy show that the nanotubes are undamaged. The density is equal to 1.29 g cm⁻³ and the pores are all below 6 nm in diameter. The electrical conductivity is equal to 1650 S cm⁻¹. The transverse fracture strength is equal to 47 MPa.     

Interface step-induced thin-film delamination and buckling

Atomistic simulations based on experimental observations provide the first evidence that the interface delamination of a thin film from its substrate may start from interface steps. Buckling of the film after interface gliding from both edges of its delaminated part is also observed. In the framework of the Föppl–von Kármán theory of thin plates, the expression of the critical strain beyond which the film buckles has been then analytically determined as a function of the step height and gliding displacements. Both numerical and analytical results confirm that the formation of blisters is favoured in the neighbourhood of interfacial imperfections.     

Mass Spectrometry-Based Proteomics Reveal Alcohol Dehydrogenase 1B as a Blood Biomarker Candidate to Monitor Acetaminophen-Induced Liver Injury

Acute liver injury (ALI) is a severe disorder resulting from excessive hepatocyte cell death, and frequently caused by acetaminophen intoxication. Clinical management of ALI progression is hampered by the dearth of blood biomarkers available. In this study, a bioinformatics workflow was developed to screen omics databases and identify potential biomarkers for hepatocyte cell death. Then, discovery proteomics was harnessed to select from among these candidates those that were specifically detected in the blood of acetaminophen-induced ALI patients. Among these candidates, the isoenzyme alcohol dehydrogenase 1B (ADH1B) was massively leaked into the blood. To evaluate ADH1B, we developed a targeted proteomics assay and quantified ADH1B in serum samples collected at different times from 17 patients admitted for acetaminophen-induced ALI. Serum ADH1B concentrations increased markedly during the acute phase of the disease, and dropped to undetectable levels during recovery. In contrast to alanine aminotransferase activity, the rapid drop in circulating ADH1B concentrations was followed by an improvement in the international normalized ratio (INR) within 10–48 h, and was associated with favorable outcomes. In conclusion, the combination of omics data exploration and proteomics revealed ADH1B as a new blood biomarker candidate that could be useful for the monitoring of acetaminophen-induced ALI.     

In vitro kinetic analysis of carbohydrate and aromatic amino acid metabolism of different members of the human colon

The carbohydrate and aromatic amino acid metabolism of several species related to the human colon was investigated into more detail. Therefore, in vitro fermentations were performed, with different carbohydrate sources, during which several aromatic amino acids were added to the fermentation medium. Shifts in end-product formation in response to the available nutrients were observed for all strains tested. The major part of amino acid degradation occurred after depletion of the carbohydrates. Moreover, it was shown that Bifidobacterium strains are capable of degrading aromatic amino acids in the absence of carbohydrates. The excretion of certain intermediates of the aromatic amino acid metabolism was observed for a strain of Clostridium clostridioforme, after which they were metabolized again during a later stage of fermentation. This implies that cross-feeding on degradation products of aromatic amino acids, albeit within the same species, can occur in the human colon.     

The impact of a sewage treatment plant's effluent on sediment quality in a small bay in Lake Geneva (Switzerland–France). Part 2: Temporal evolution of heavy metals

The Bay of Vidy is the most contaminated area of Lake Geneva, Switzerland, as a result of the release of treated and untreated waste water from the municipal sewage treatment plant of the city of Lausanne and its surroundings. The reconstruction of the historical deposition of heavy metals in the sediment of the bay has been performed by the analysis of several dated (radiocaesium) sediment cores. The presence of sewage‐derived contaminants in the Bay of Vidy since the beginning of the sewage treatment plant's operations in 1964 is clearly observed, when a sharp increase in heavy metal contents is recorded, with maximum concentrations of cadmium, copper, zinc and lead occurring between the late 1960s and early 1970s. Despite considerable improvement in recent times, the present concentrations of the investigated heavy metals in sediments of the Bay of Vidy are still higher than concentrations measured at the centre of the lake, the latter close to Lake Geneva's natural background values. It is concluded that the quantity of heavy metals deposited in the bay is considerable and, because of sediment instability, will constitute a potential hazard for biota.     

Effects of dietary inclusion of xylooligo‐ saccharides,arabinoxylooligosaccha‐ rides and soluble arabinoxylan on the microbial composition of caecal contents of chickens

BACKGROUND: Arabinoxylan (AX)‐derived preparations have raised particular interest by the suggestion that they exert prebiotic properties. Therefore an in vivo experiment was conducted to study the effects of xylooligosaccharides (XOS), arabinoxylooligosaccharides (AXOS) and soluble AX (S‐AX) on several groups of gut bacteria of chickens. Chickens were fed a control diet or the same diet supplemented with 2.5 g kg^?1 of XOS (average degree of polymerisation (avDP) of 3, average degree of arabinose substitution (avDS) of 0.09), wheat bran‐derived AXOS (avDP 9, avDS 0.34) or wheat endosperm alkali‐solubilised AX (S‐AX, avDP > 6000, avDS 0.5). RESULTS: All treatment groups showed an increase in the number of caecal bifidobacteria after 2 weeks of feeding (P < 0.05), while the treatments did not impact numbers of Enterobacteriaceae and aerobic lactobacilli in the caeca relative to the control. XOS led to a tremendous increase in caecal bifidobacteria counts (10⁸ g^?1 for the XOS treatment versus 10³ g^?1 for the control treatment) after only 1 week of supplementation, while AXOS and S‐AX led to similar strong increases in bifidobacteria counts after 2 weeks of supplementation. Addition of S‐AX to the diet, but not of AXOS or XOS, led to a significantly decreased (P < 0.05) body weight gain after 2 weeks of feeding relative to animals on the control diet, consistent with its known viscosity‐related antinutritive effects in chickens. CONCLUSION: Similar to XOS, AXOS selectively stimulate the presence of bifidobacteria in the caeca of chickens, establishing their bifidogenic effect as a first indicator for prebiotic potential. Copyright © 2008 Society of Chemical Industry     

Cosmetic assessment of the human hair by confocal microscopy

The optical sectioning property of the confocal microscope offers a breakthrough from the classic observation of the hair in a scanning electron microscope (SEM). Confocal microscopy requires minimal sampling preparation, and the hair can be observed in its natural environment with less damage than by other microscopic methods such as SEM. While used in the reflection mode, the true morphology of the cuticle and the various exogenous deposits at the surface can be identified and quantified. This relatively noninvasive, nondestructive technique is routinely used by us to monitor the efficiency of cleansing shampoos, to assess the homogeneity of layering polymers, and to evaluate the changes they induce in the optical properties of the hair surface in terms of opacity, transparency, and brilliancy. A second important field of investigation uses the fluorescence channel which reveals the internal structure of the hair. Fluorescent probes (rhodamine and its derivatives) demonstrate the routes of penetration and outline the geometry of cortical cells and of the medulla according to their lipophilic or hydrophilic properties. A volume rendering of a hair cylinder provides a better understanding of the interrelationships between cuticle cells, cortical cells, and the medullar channel. This recent technology is becoming an invaluable tool for the cosmetic assessment of the hair.     

Silver versus white sheet as a back reflector for microcrystalline silicon solar cells deposited on LPCVD‐ZnO electrodes of various textures

We compare the performance of two back reflector designs on the optoelectrical properties of microcrystalline silicon solar cells. The first one consists of a 5‐µm‐thick low‐pressure chemical vapor deposition (LPCVD)‐ZnO electrode combined with a white sheet; the second one incorporates an Ag reflector deposited on a thin LPCVD‐ZnO layer (with thickness below 200 nm). For this latter design, the optical loss in the nano‐rough Ag reflector can be strongly reduced by smoothing the surface of the thin underlying ZnO layer, by means of an Ar‐plasma treatment. Because of its superior lateral conductivity, the thin‐ZnO/Ag back reflector design provides a higher fill factor than the dielectric back reflector design. When decreasing the roughness of the front electrode with respect to our standard front LPCVD‐ZnO layer, the electrical cell performance is improved; in addition, the implementation of the thin‐ZnO/Ag back reflector leads to a significant relative gain in light trapping. Applying this newly optimized combination of front and back electrodes, the conversion efficiency is improved from 8.9% up to 9.4%, for cells with an active‐layer thickness of only 1.1 µm. We thereby highlight the necessity to optimize simultaneously the front and back electrodes. Copyright © 2014 John Wiley & Sons, Ltd.