A predictive hybrid force modeling in turning: application to stainless steel dry machining with a coated groove tool

The International Journal of Advanced Manufacturing Technology - This paper presents an hybrid numerical/analytical modeling for estimation of cutting forces in machining process. The approach...     

Stress corrosion cracking susceptibility of P285NH and API 5L X65 steel grades in the high-level radioactive waste repository cell concept

Since 2014, the concept developed for the disposal of high-level radioactive waste in the French deep geological repository project Cigéo includes a cement-based grout material. This cement-based grout material will be injected between the casing and the claystone to neutralize the potential acidity resulting from the claystone oxidation induced by the drilling process of the disposal cell. In these conditions of pH (around 10.5) and temperature (90°C, maximum expected during the disposal), the metallic materials could be sensitive to stress corrosion cracking (SCC). In this project, different environments (aerated or deaerated, at room temperature or at 90°C) and synthetic solutions are considered to reproduce the different periods expected during the long life repository. The project is based on electrochemical measurements (polarization curves to define the SCC critical domain of potentials), slow strain rate tensile tests, and long-term immersion for crack initiation and propagation tests.     

Modification of hydrophobic/hydrophilic properties of Vulcan XC72 carbon powder by grafting of trifluoromethylphenyl and phenylsulfonic acid groups

Carbon supports (glassy carbon and Vulcan XC72 powder) were modified by electrochemical and spontaneous grafting of phenylsulfonic acid (PSA) or trifluoromethylphenyl (TFMP) groups via diazonium ion reduction. The effectiveness of the grafting was confirmed electrochemically, by XPS measurements and elemental analyses. The hydrophobic or hydrophilic character of carbon surfaces was evidenced by measuring the contact angles of drops of different liquids (water, ethylene glycol and glycerol) in heptane. The surface energy was calculated and it was found, for example, that spontaneous grafting of a glassy carbon surface by PSA groups led to an increase by a factor 20 of the surface energy compared with an unmodified glassy carbon surface. The study of the grafting of such groups on XC72 carbon powder indicated that a very low grafting ratio (in wt%) led to a significant change in the macroscopic properties of the powder. Thermogravimetric analysis coupled with mass spectroscopy measurements (TGA-MS) showed that these grafted layers were thermally stable even in the presence of dispersed platinum nanoparticles. It was shown by cyclic voltammetry that the carbon substrate modification did not affect the electrochemical behavior of platinum catalyst, since the same active surface area was determined on Pt-XC72, Pt-PSA-XC72 and Pt-TFMP-XC72 catalysts.     

Spark plasma sintering of double-walled carbon nanotubes

Bulk samples of double-walled carbon nanotubes are prepared for the first time. The best spark plasma sintering conditions are (1100 °C, 100 MPa). Raman spectroscopy and scanning electron microscopy show that the nanotubes are undamaged. The density is equal to 1.29 g cm⁻³ and the pores are all below 6 nm in diameter. The electrical conductivity is equal to 1650 S cm⁻¹. The transverse fracture strength is equal to 47 MPa.     

Interface step-induced thin-film delamination and buckling

Atomistic simulations based on experimental observations provide the first evidence that the interface delamination of a thin film from its substrate may start from interface steps. Buckling of the film after interface gliding from both edges of its delaminated part is also observed. In the framework of the Föppl–von Kármán theory of thin plates, the expression of the critical strain beyond which the film buckles has been then analytically determined as a function of the step height and gliding displacements. Both numerical and analytical results confirm that the formation of blisters is favoured in the neighbourhood of interfacial imperfections.     

Mass Spectrometry-Based Proteomics Reveal Alcohol Dehydrogenase 1B as a Blood Biomarker Candidate to Monitor Acetaminophen-Induced Liver Injury

Acute liver injury (ALI) is a severe disorder resulting from excessive hepatocyte cell death, and frequently caused by acetaminophen intoxication. Clinical management of ALI progression is hampered by the dearth of blood biomarkers available. In this study, a bioinformatics workflow was developed to screen omics databases and identify potential biomarkers for hepatocyte cell death. Then, discovery proteomics was harnessed to select from among these candidates those that were specifically detected in the blood of acetaminophen-induced ALI patients. Among these candidates, the isoenzyme alcohol dehydrogenase 1B (ADH1B) was massively leaked into the blood. To evaluate ADH1B, we developed a targeted proteomics assay and quantified ADH1B in serum samples collected at different times from 17 patients admitted for acetaminophen-induced ALI. Serum ADH1B concentrations increased markedly during the acute phase of the disease, and dropped to undetectable levels during recovery. In contrast to alanine aminotransferase activity, the rapid drop in circulating ADH1B concentrations was followed by an improvement in the international normalized ratio (INR) within 10–48 h, and was associated with favorable outcomes. In conclusion, the combination of omics data exploration and proteomics revealed ADH1B as a new blood biomarker candidate that could be useful for the monitoring of acetaminophen-induced ALI.     

Retail competition in electricity markets

The introduction of competition into retail electricity supply gave rise to great expectations. However, to date, its performance has proven less than stellar, owing primarily to the theoretical concepts underpinning this reform, which draw heavily on the Austrian school. Neither consumers’ decision processes nor this sector's technical paradigm were adequately accounted for, leading to an uncorrect estimation of the expected impact of opening to competition. Short- and medium-term prospects for the evolution of retail markets must be reconsidered from the perspective of greater stability: not a generalization of competition, but rather a persistent segmentation between active and inactive clients; not a large and rapid diffusion of radical innovations in commercialisation, with the potential for undermining the incumbents’ positions.     

开关电源环路中的TL431

在此前一系列的3篇文章中，指出了如何采用TL431来实现1类和2类补偿器。如果前述补偿器类型适合大多数电流模式控制配置工作，其它控制模式则可能需要3类补偿器。举例来说，如果需要对连续导电模式（CCM）电压模式转换器进行补偿，就需要额外的极点和零点。在这3类配置中，TL431并不太有利于实践这样的设计：眼前的快通道（fast lane）显然会使设计工作复杂化。本文提出了简单的构想，以与所观测到交流输入完全解耦的外部直流偏置来消除快通道。这样一来，设计工作被简化，类似于采用运放来构建传统的3类补偿器。