Thermodynamics of a Stable Blister Delamination at Elevated Temperature

A new blister test using thermal expansion of an internal working gas trapped at a dissimilar interface between a thin polymer coating and a rigid adherend is developed to measure the adhesive strength at elevated temperature. The blister dimensions are measured by a thermomechanical analyser (TMA) and an optical microscope as a function of temperature. The thermodynamics is presented based on both linear elastic fracture mechanics and the ideal gas law.     

Pyrolysis of model compounds on spent oil shales, minerals and charcoal: Implications for shale oil composition

Aliphatic compounds (alkanes, alkenes, alkanoic acids, ketones, alcohols and amines) were passed through beds of spent oil shales (Condor brown, Condor carbonaceous, Julia Creek), minerals (quartz, calcite, K-feldspar, pyrite, kaolinite) and charcoal at temperatures of 300–600 °C and the products were analysed by g.c.m.s. All the materials catalysed isomerization, aromatization and cracking to varying degrees: non-clay minerals < kaolinite ≈ spent oil shales < charcoal. Products included branched alkanes, isomeric alkenes, nitriles, ketones and alkyl-substituted benzenes, naphthalenes, pyridines, phenols, thiophenes and pyrroles. These compounds occur in shale oils and may be derived from secondary reactions of aliphatic products arising from kerogen cracking.     

Alkane sulphonate preparation by the sulphitation of long chain olefins

The free radical addition of sodium bisulphite to linear olefins (sulphitation) has been investigated. It was observed that the kinetic consequences of the probable mechanism of sulphitation were consistent with the experimental results. Thus sulphitation is first order with respect to olefin concentration and above a critical level is independent of bisulphite concentration. In the sulphitation of 1-dodecene an undesirable alkane–sulphonate–sulphinate forms, the proportion of which, as expected, varies with sulphitation pH; the higher the pH the less the proportion of sulphonate–sulphinate. To prepare alkane sulphonates optimally thereby restricting the sulphonate–sulphinate proportion to an acceptable minimum (15% w/w) sulphitation pH should be the maximum at which the critical bisulphite concentration can exist. Further minimisation of sulphonate–sulphinate formation requires a new approach. It was found that whereas linear olefins give rise to this product, as does 1-hexyne, vinylidene olefins, styrene and 1,3–hexadiene do not. These observations have been rationalised in terms of the relative thermal stabilities of the intermediate sulphone–sulphonate radicals.     

Mechanisms of Enhanced Catalysis in Enzyme–DNA Nanostructures Revealed through Molecular Simulations and Experimental Analysis

Understanding and controlling the molecular interactions between enzyme substrates and DNA nanostructures has important implications in the advancement of enzyme–DNA technologies as solutions in biocatalysis. Such hybrid nanostructures can be used to create enzyme systems with enhanced catalysis by controlling the local chemical and physical environments and the spatial organization of enzymes. Here we have used molecular simulations with corresponding experiments to describe a mechanism of enhanced catalysis due to locally increased substrate concentrations. With a series of DNA nanostructures conjugated to horseradish peroxidase, we show that binding interactions between substrates and the DNA structures can increase local substrate concentrations. Increased local substrate concentrations in HRP(DNA) nanostructures resulted in 2.9‐ and 2.4‐fold decreases in the apparent Michaelis constants of tetramethylbenzidine and 4‐aminophenol, substrates of HRP with tunable binding interactions to DNA nanostructures with dissociation constants in the micromolar range. Molecular simulations and kinetic analysis also revealed that increased local substrate concentrations enhanced the rates of substrate association. Identification of the mechanism of increased local concentration of substrates in close proximity to enzymes and their active sites adds to our understanding of nanostructured biocatalysis from which we can develop guidelines for enhancing catalysis in rationally designed systems.     

Enantiospecific Synthesis and Cytotoxicity Evaluation of Oximidine II Analogues

Analogues of the anticancer natural product oximidine II were prepared and evaluated for cytotoxicity. One analogue of oximidine II that carries a C15 allylic amide side chain as well as two analogues with C15 vinyl sulfone side chains were found to lack cytotoxicity against the cancer cell line SK‐Mel‐5, thereby confirming the necessity of the C15 enamide side chain of oximidine II for cytotoxicity. Four analogues, designed by comparative molecular similarity index analysis (CoMSIA), that feature a less complex macrolactone scaffold were prepared and tested. The two analogues carrying a C15 vinyl sulfone group and the two analogues with a C15 oximidine II enamide side chain showed weak cytotoxicity against the SK‐Mel‐5 cell line and other cell lines, indicating that the designed simplified macrocycles cannot replace the oximidine II macrocycle.     

Structure–Property Relationships in Aligned Electrospun Barium Titanate Nanofibers

Barium titanate nanofibers were uniaxially aligned by electrospinning onto a rotating copper wire drum and alignment was maintained during calcination of the fibers. Two methods for maintaining alignment during calcination were tested, by either using carbon tape or a peeling off method to remove the aligned fibers from the mandrel followed by calcination. The carbon tape removal method led to the formation of shorter aligned nanowires while the peeling off method resulted in longer nanofibers. Additionally, the effects of calcination temperature and time on crystal structure were also examined. The degree of tetragonality in the barium titanate nanofibers increased at higher calcination temperatures and times. Piezoelectricity was confirmed in the nanofibers calcined using piezoeresponse force microscopy, yielding a d₃₃ value of 15.5 pm/V. Using the methods presented here, large quantities of aligned piezoelectric barium titanate and other ceramic fibers or wires can be produced to fulfill their demand in novel microelectronics.     

Comparative Study of Ultrasonication-Induced and Naturally Self-Assembled Silk Fibroin-Wool Keratin Hydrogel Biomaterials

This study reports the formation of biocompatible hydrogels using protein polymers from natural silk cocoon fibroins and sheep wool keratins. Silk fibroin protein contains β-sheet secondary structures, allowing for the formation of physical cross-linkers in the hydrogels. Comparative studies were performed on two groups of samples. In the first group, ultrasonication was used to induce a quick gelation of a protein aqueous solution, enhancing the ability of Bombyx mori silk fibroin chains to quickly entrap the wool keratin protein molecules homogenously. In the second group, silk/keratin mixtures were left at room temperature for days, resulting in naturally-assembled gelled solutions. It was found that silk/wool blended solutions can form hydrogels at different mixing ratios, with perfectly interconnected gel structure when the wool content was less than 30 weight percent (wt %) for the first group (ultrasonication), and 10 wt % for the second group (natural gel). Differential scanning calorimetry (DSC) and temperature modulated DSC (TMDSC) were used to confirm that the fibroin/keratin hydrogel system was well-blended without phase separation. Fourier transform infrared spectroscopy (FTIR) was used to investigate the secondary structures of blended protein gels. It was found that intermolecular β-sheet contents significantly increase as the system contains more silk for both groups of samples, resulting in stable crystalline cross-linkers in the blended hydrogel structures. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to analyze the samples’ characteristic morphology on both micro- and nanoscales, which showed that ultrasonic waves can significantly enhance the cross-linker formation and avoid phase separation between silk and keratin molecules in the blended systems. With the ability to form cross-linkages non-chemically, these silk/wool hydrogels may be economically useful for various biomedical applications, thanks to the good biocompatibility of protein molecules and the various characteristics of hydrogel systems.     

Application of Selective 29Si Isotopic Enrichment to Studies of the Structure of Calcium Silicate Hydrate (C-S-H) Gels

Selective isotopic enrichment of SiO₂ with ²⁹Si in a mixture with tricalcium silicate (C₃S) has allowed the Si from this phase to be effectively labeled during the course of the hydration reaction, thus isolating its contribution to the reaction. A double Q₂ signal has been observed in ²⁹SI solid-state MAS NMR spectroscopy of C-S-H gels of relatively low Ca/Si ratio, prepared by hydration or by carbonation of a C₃S paste. The origin of the weaker, downfield peak is discussed and tentatively attributed to bridging tetrahedra of a dreierkette silicate chain structure.     

Drag reduction characteristics of graft copolymers prepared by the gamma irradiation of poly(oxyethylene) in the presence of acrylic acid

Graft copolymers were prepared by irradiation of poly(oxyethylene), PEO, aqueous solutions in presence of acrylic acid. Chain transfer to PEO controls the graft length, the measured chain transfer constant of the acrylic acid radicals to PEO being 4.11 × 10^?4 at 25°C. The drag reduction characteristics of the graft copolymers were measured in the Reynolds number range 10⁴–10⁵ in a smooth-walled tube, 0.635 cm inside diameter. The drag reduction falls to near zero as the solution pH is lowered to 3, evidence of the formation of a PEO-poly(acrylic acid) coacervate.