Multi-Scale Modelling in Time-Domain Electromagnetics

The paper reviews the techniques used to describe efficiently in time-domain electromagnetics the presence of fine physical features in an otherwise coarse numerical mesh. This is a major area of concern in electromagnetic modelling and simulation as it affects crucially modelling capabilities in dealing with complex practical configurations. Two broad classes of modelling methods are identified, those where the basic approach is to distort and/or refine the numerical mesh, or, interface the mesh to local solutions. A typical example of a technique in the former category is multi-gridding and in the latter mesh-to-wire interfaces. The emphasis of the paper is to describe the essence of the different approaches, their strengths and weaknesses and to identify areas of further work.     

Microwave applications of TLM modeling techniques (Invited article)

This article describes the essential features of the transmission-line modeling (TLM) technique and its application to the simulation of the behavior of microwave circuits. Emphasis is placed on presenting the general modeling approach and developments to the model to deal with practical microwave problems. Computational techniques and requirements are discussed with reference to dispersion, coarseness errors, and infinite boundaries. © 1996 John Wiley & Sons, Inc.     

A comparison between the time-domain and the frequency-domain diakoptic methods of solving field problems by transmission-line modelling

The nature and significance of time-domain approximations needed for a diakoptic solution using transmission-line modelling (TLM) are examined. Truncation, filtering and repeated convolution of time responses result in severe restrictions in the accuracy of time-domain diakoptics. The frequency-domain diakoptic method has several advantages, including speed and simplicity, and warrants further study.     

Incorporation of an organic Rankine cycle in a transcritical booster CO2 refrigeration system

The objective of this work is the investigation of an alternative refrigeration system, which combines a supermarket CO₂ booster system with an organic Rankine cycle. The waste heat after the high-pressure compressor is used in order to feed the organic Rankine cycle for electricity production. The working fluid in the organic Rankine cycle is selected to be the octamethyltrisiloxane (MDM), which has a low global warming potential, and so all the used working fluids in the system are environmentally friendly. The system is studied in the transcritical region for ambient temperatures from 27°C to 40°C. In every case, the system is optimized in order to minimize the overall electricity demand. According to the final results, the system coefficient of performance (COP) can be enhanced from 4.83% to 7.60%, while the electricity consumption can be reduced from 4.60% to 7.03% compared with the conventional booster system. Higher enhancements are found in cases with higher ambient temperatures. Furthermore, a preliminary financial study indicates that the examined idea is viable with the simple payback period to be 5.45 years. The present study is conducted by using a homemade model written in Engineering Equation Solver.     

Ambient particulate matter exhibits direct inhibitory effects on oxidative stress enzymes

A primary mechanistic hypothesis by which ambient air particles have a significant negative impact on human health is via the induction of pulmonary inflammatory responses mediated through the generation of reactive oxygen species (ROS). Development of a biosensor for the assessment of particulate ROS activity would be a significant advance in air pollution monitoring. The objective of this study was to evaluate whether air particulates interact directly with protective enzymes involved in oxidative stress responses. We performed enzyme activity assays on four enzymes involved in oxidative stress responses (Cu/Zn superoxide dismutase, Mn superoxide dismutase, glutathione peroxidase, and glutathione reductase) in the presence of particles of varying toxicities and found distinctive inhibition patterns. On the basis of these findings, we suggest a strategy for an enzyme bioassay that could be used to assess the potential of particles to generate ROS-induced responses.     

Effect of focused ion beam sample preparation on the phase composition of zirconia

The investigation of phase transformations in metastable ceramic systems such as zirconia often requires local phase analysis within the areas of interest. Electron backscatter diffraction is a suitable method in combination with focused ion beam sample preparation. The interaction between ion beam and sample has to be carefully considered. In case of metastable Y-PSZ and Mg-PSZ, phase transformations were observed after FIB preparation with 30?kV, 30?nA and 5° incidence angle. Damage was the dominating effect for angles of 72°. The expected local temperature increase due to the ion bombardment with 30?kV and 30?nA is 700?K for ZrO₂. Thus, the observed phase transformations can be explained on the basis of the temperature increase in the corresponding Y-PSZ phase diagram. In case of Mg-PSZ, the transition temperature is 1083?°C. The local temperature increase was obviously lower. The excitation energy for the observed phase transformation was smaller than expected from the phase diagrams of the thermodynamic equilibrium. Using 5?kV, 4.8?nA and 5° incidence angle, no phase transformations and no damage were observed. Thus, these conditions are well suited for the FIB preparation of metastable zirconia.     

A full‐scale system for aerobic biological treatment of olive mill wastewater

Olive mill wastewater (OMW) is a major environmental problem in the Mediterranean basin. Although many methods for OMW treatment have been developed, only a few have been adopted in pilot‐ or full‐scale applications. A full‐scale system for aerobic biological treatment of OMW was developed. The system consists of a trickling filter and a recirculation tank. Continuous recirculation of the wastewater was used to provide oxygen concentrations from 0.7 to 1.2 mg L^?1. Low ambient temperatures did not affect system performance since the raw wastewater was warm enough. Nutrient addition was not necessary as raw wastewater contained sufficient nitrogen and phosphorous concentrations. Indigenous olive pulp bacteria proved to be resistant to full‐scale conditions. Feed chemical oxygen demand and phenolic concentrations were about 43 000 and 9500 mg L^?1, respectively. The system reduced more than half of the organic load under continuous operation and a hydraulic retention time of 24 h. The efficiency of this method could be improved by combining it with another technology to further reduce the organic load. The absence of mechanical aeration and the very low hydraulic retention time denotes that the proposed system could be viable and attractive. Copyright © 2011 Society of Chemical Industry     

Life time prediction of self-supporting flame-sprayed alumina-rich coatings

Main objective of the presented research is the life time prediction of self-supporting flame-sprayed Al₂O₃- and Al₂O₃ -ZrO₂ -TiO₂-materials under constant load. The characteristic life time and its scatter were derived from stable crack growth tests and Weibull-statistics including the four-point-bending and ball-on-three-balls method. The potential life time was estimated in order to assess room-temperature handling and long term storage of self-supporting flame-sprayed alumina components. In terms of flexural strength, energy release, and subcritical crack growth parameters, distinct differences between both materials were shown. In turn, the characteristic life times only barely deviated from each other. From that the conclusion was drawn that life time performance under constant load application is governed by the characteristic flame-spray microstructure. However, advantages in the flame-spray processing of Al₂O₃ - ZrO₂ -TiO₂ are still given, attributed to its lower melting temperature.     

A Systematic Review and Meta-Analysis of Pharmacogenetic Studies in Patients with Chronic Kidney Disease

Chronic kidney disease (CKD) is an important global public health problem due to its high prevalence and morbidity. Although the treatment of nephrology patients has changed considerably, ineffectiveness and side effects of medications represent a major issue. In an effort to elucidate the contribution of genetic variants located in several genes in the response to treatment of patients with CKD, we performed a systematic review and meta-analysis of all available pharmacogenetics studies. The association between genotype distribution and response to medication was examined using the dominant, recessive, and additive inheritance models. Subgroup analysis based on ethnicity was also performed. In total, 29 studies were included in the meta-analysis, which examined the association of 11 genes (16 polymorphisms) with the response to treatment regarding CKD. Among the 29 studies, 18 studies included patients with renal transplantation, 8 involved patients with nephrotic syndrome, and 3 studies included patients with lupus nephritis. The present meta-analysis provides strong evidence for the contribution of variants harbored in the ABCB1, IL-10, ITPA, MIF, and TNF genes that creates some genetic predisposition that reduces effectiveness or is associated with adverse events of medications used in CKD.