Perturbation Analysis of Multiclass Stochastic Fluid Models

We use a stochastic fluid model (SFM) to capture the operation of finite-capacity queueing systems with multiple customer classes. We derive gradient estimators for class-dependent loss and workload related performance metrics with respect to any one of several threshold parameters used for buffer control. These estimators are shown to be unbiased and directly observable from a sample path without any knowledge of underlying stochastic characteristics of the traffic processes. This renders them computable in on-line environments and easily implementable in settings such as communication networks.     

Variation of density of diesel and biodiesel mixtures in three different temperature ranges

The use of biodiesel fuel is becoming increasingly imperative nowadays and it is necessary to know the change of density. In this work the variation of density of diesel-biodiesel blends across the scale of 0–100% by adding each time 2% biodiesel and then measuring the density of three different temperatures (5, 15, 25°C) covering and the usual scale of temperatures the use of mixtures of diesel-biodiesel. Through the extraction of equations can be known in advance the relationship of density of diesel-biodiesel blend, and temperature that is used.     

Improved γ-alumina support based pseudo-boehmite shaped by micro-extrusion process for oxygen carrier support application

γ-Alumina extrudates for chemical-looping combustion in fluidized bed reactors were shaped by varying acetic acid concentrations between 0.07 and 3.76 M. Influence of pseudo-boehmite peptization on structural properties, microstructure, chemical phases and attrition resistance was determined. With addition of acetic acid, the d₉₀ of boehmite agglomerates after 1 h kneading decreased from 134 to 40 μm at pH 4. Due to this, the extrusion diameter was reduced from 1500 to 200 μm, as well as median pore radii (from 30.1 to 5.3 nm). Porosity was about 70%. Addition of more than 1.87 M acid lead to a slight increase in mesopore sizes caused by some pore blocking caused by the formation of aluminium acetate salts. A small micropore surface was determined with t-layer model from Harkins and Jura. Higher attrition resistance was observed for samples peptized with lower acid concentration because of the closer contact between particles after decomposition.     

Effects of carbonate on the electrolytic removal of ammonia and urea from urine with thermally prepared IrO<Subscript>2</Subscript> electrodes

Recent studies have shown that electrolysis can be an efficient process for nitrogen removal from urine. These studies have been conducted with urea solutions or fresh urine, but urine collected in NoMix toilets and urinals has a substantially different composition, because bacteria hydrolyse urea quickly to ammonia and carbonate. In this study, we compared electrochemical removal of nitrogen from synthetic solutions of fresh and stored urine using IrO₂ anodes. We could show that in fresh urine both ammonia and urea are efficiently eliminated, mainly through chlorine-mediated oxidation. However, in stored urine the presence of carbonate, arising from urea hydrolysis, leads to an inhibition of ammonia oxidation. We suggest two parallel mechanisms to explain this effect: the competition between chloride and carbonate oxidation at the anode and the competition between chlorate formation, enhanced by the buffering effect of carbonate, and ammonia oxidation for the consumption of active chlorine in the bulk. However, further experiments are needed to support the latter mechanism. In conclusion, this study highlights the negative consequences of the presence of carbonate in urine solutions, but also in other wastewaters, when subjected to an electrolytic treatment on IrO₂ in alkaline media.     

Optimal control of batteries with fully and partially available rechargeability

Motivated by the increasing dependence of many systems on battery energy, we study the problem of optimally controlling how to discharge and recharge a non-ideal battery so as to maximize the work it can perform over a given time period and still maintain a desired final energy level. Modeling a battery as a dynamic system, we adopt a Kinetic Battery Model (KBM) and formulate a finite-horizon optimal control problem when recharging is always feasible under the constraint that discharging and recharging cannot occur at the same time. The solution is shown to be of bang–bang type with the property that the battery is always in recharging mode during the last part of the interval. When the length of the time horizon exceeds a critical value, we also show that the optimal policy includes chattering. Numerical results are included to illustrate our analysis. We then extend the problem to settings where recharging is only occasionally feasible and show that it can be reduced to a nonlinear optimization problem which can be solved at least numerically.     

Innovative Ingredients and Emerging Technologies for Controlling Ice Recrystallization,Texture, and Structure Stability in Frozen Dairy Desserts: A Review

Over the past decade, ice cream manufacturers have developed a strong understanding of the functionality of key ingredients and processing, developing effective explanations for the link between structure forming agents, stability mechanisms, and perceived quality. Increasing demand for products perceived as healthier/more natural with minimal processing has identified a number of new tools to improve quality and storage stability of frozen dairy desserts. Ingredients such as dietary fiber, polysaccharides, prebiotics, alternate sweeteners, fat sources rich in unsaturated fatty acids and ice strucsturing proteins (ISP) have been successfully applied as cryoprotective, texturizing, and structuring agents. Emerging minimal processing technologies including hydrostatic pressure processing, ultrasonic or high pressure assisted freezing, low temperature extrusion and enzymatically induced biopolymers crosslinking have been evaluated for their ability to improve colloidal stability, texture and sensory quality. It is therefore timely for a comprehensive review.     

A triple exponentially weighted moving average control chart for monitoring time between events

Time between events (TBE) charts are used in high-yield processes where the rate of occurrences is very low. In the current article, we propose a triple exponentially weighted moving average control chart to monitor TBE (regarded as triple exponentially weighted moving average TEWMA-TBE chart) modeled by a gamma distribution. One- and two-sided schemes of the proposed chart are designed and compared with the double EWMA DEWMA-TBE and EWMA-TBE charts. It is shown that the lower- and two-sided TEWMA-TBE charts outperform its competitors, especially for small to moderate downward shifts, while the upper-sided TEWMA-TBE chart has very good detection ability for small shifts. We also study the robustness of the proposed chart when the true distribution is a Weibull or a lognormal and it is found that the TEWMA-TBE chart has better robustness properties than its competitors, especially for small shifts. Two illustrative examples from airplane accidents and earthquakes are also provided to display the application of the proposed chart.     

Reticulated Porous Foam Ceramics with Different Surface Chemistries

The aim of this study was to discuss the influence of different filter surface chemistries on the properties of foam filters. For reliable results, it is essential to ensure comparable structural properties (cell size and strut thickness) for all different surface chemistries (Al₂O₃, MgAl₂O₄, 3Al₂O₃·2SiO₂, SiO₂, and TiO₂) possess the same structural properties (cell size and strut thickness). Filters made of 100% of the investigated materials and alumina skeletons coated with the investigated materials were prepared. The coated alumina samples were sintered in one and two steps. The processing route with two sintering steps resulted in improved mechanical properties and comparable shrinkage and strut thickness. The 100% bulk foams possessed different pore sizes due to the differences of the material shrinkage. In this study, a comparison of the experimental investigated properties of the ceramic foam filters and the theoretically calculated values for foam materials derived from the bulk material properties is established.