Use of lambda DNA as a marker to assess DNA stability in olive oil during storage

Filtered olive oil samples spiked with three different concentrations of λDNA were stored at 25 °C under a 12 h photoperiod for up to a year. These samples were used for DNA extraction and PCR amplification of λDNA amplicons of 107, 415 and 691 bp length. The amplification signal was gradually decreased with longer storage periods, while the strength of the signal was related to the initial concentration of spiking λDNA particularly during longer storage periods. The 107 bp amplicon was the only one successfully amplified from all the samples, regardless of both concentration of spiking λDNA and storage period. The amplification of 415 and 691 bp amplicons was not successful for samples stored longer than a threshold period of 20 and 10 days, respectively. These results suggest that detection of polymorphic markers requiring DNA templates shorter than 100 bp might have a wider range of applications in DNA fingerprinting of olive oil. In addition, the DNA extracts were tested for the presence of inhibitors in PCR amplification reactions of yeast DNA amplicons. The inhibitory effect of olive DNA extracts was partial and gradually increased with the storage period of the olive oil samples used for the DNA extraction.     

Ein numerisches Verfahren zur Ermittlung der Ovalisierungseinflüsse in Rohrleitungen aus Versuchsergebnissen

Zusammenfassung Im Rohrleitungsbau und insbesondere in der nuklearen Kraftwerkstechnik sind die Rohrb?gen die am st?rksten beanspruchten Konstruktionselemente. Biegemomente, die durch thermische Belastung, schnelles Schlie?en von Sicherheitsventilen, Wasserhammer usw. entstehen, belasten die Rohrleitung, wobei die Rohrb?gen ihre ursprünglich kreisrunden Querschnitte ?ndern (Ovalisierung). Diese Eigenschaft der Krümmerquerschnitte ist der Grund für ihre h?here Flexibilit?t und die zus?tzlichen Spannungen in den Rohrbogenbereichen. Der vorliegende Beitrag beschreibt eine einfache N?herungsmethode, welche die Quantifizierung der Ovalisierungseinflüsse in der Rohrleitung auf Grund von Dehnungsmessungen erm?glicht. Dies erlaubt die Behandlung relevanter Fragen wie die experimentelle Verifizierung von FE-Programmen und- modellen und der entsprechenden Regelwerte für Rohrb?gen (Korrekturfaktoren für Flexibilit?t und Spannung).     

On the estimation of characteristic indoor air quality parameters using analytical and numerical methods

Indoor exposure to air contaminants penetrating from the outdoor environment depends on a number of key processes and parameters such as the ventilation rate, the geometric characteristics of the indoor environment, the outdoor concentration and the indoor removal mechanisms. In this study two alternative methods are used, an analytical and a numerical one, in order to study the time lag and the reduction of the variances of the indoor concentrations, and to estimate the deposition rate of the air contaminants in the indoor environment employing both indoor and outdoor measurements of air contaminants. The analytical method is based on a solution of the mass balance equation involving an outdoor concentration pulse which varies sinusoidally with the time, while the numerical method involves the application of the MIAQ indoor air quality model assuming a triangular pulse. The ratio of the fluctuation of the indoor concentrations to the outdoor ones and the time lag were estimated for different values of the deposition velocity, the ventilation rate and the duration of the outdoor pulse. Results have showed that the time lag between the indoor and outdoor concentrations is inversely proportional to the deposition and ventilation rates, while is proportional to the duration of the outdoor pulse. The decrease of the ventilation and the deposition rate results in a rapid decrement of the variance ratio of indoor to outdoor concentrations and to an increment of the variance ratio, respectively. The methods presented here can be applied for gaseous species as well as for particulate matter. The nomograms and theoretical relationships that resulted from the simulation results and the analytical methods respectively were used in order to study indoor air phenomena. In particular they were used for the estimation of SO2 deposition rate. Implications of the studied parameters to exposure studies were estimated by calculating the ratio of the indoor exposure to the exposure outdoors. Limitations of the methods were explored by testing various scenarios which are usually met in the indoor environment. Strong indoor emissions, intense chemistry and varying ventilation rates (opening and closing of the windows) were found to radically influence the time lag and fluctuation ratios.     

Eliciting the Sensory Modalities of Fat Reformulated Yoghurt Ice Cream Using Oligosaccharides

In the present work, fat reduction of Greek strained yoghurt ice cream (YIC) was carried out in three proportional milkfat levels i.e. 30, 50 and 70% using three types of oligosaccharides namely long-chain inulin, oligofructose and maltodextrin 12 DE. Greek strained yoghurt was blended with ice cream mixes in ratios of 1:3 and 1:1. The physico-chemical, textural and thermal characteristics of the YIC mixes and their obtained frozen end products were determined. The sensory modalities (olfactory, gustatory, tactile and oro-tactile) of the YIC were monitored following 2 and 16 weeks of quiescent frozen storage at ?25 °C. Milkfat reduction impaired significantly (p?<?0.05) the perceived creaminess and mouthcoating sensation stimuli, whist it intensified the oral tissue friction associated sense stimuli such as astringency, wateriness and coarseness. Long-chain inulin- and maltodextrin-based samples received the highest scores for creaminess, mouthcoating, gumminess, hardness and iciness. The increase of the yoghurt to ice cream mix ratio escalated the friction/recrystallization-associated sensations e.g. astringency, sourness, coarseness and wateriness. Notwithstanding yoghurt supplementation reinforced the pseudoplasticity and macroviscosity of the ice cream mixes, it suppressed their aeration capacity leading to heavy-bodied ice creams. However, no significant effects of yoghurt supplementation level on the colligative and meltdown rate of the YIC formulations were identified. Partial least squares coupled discriminant analysis (PLS-DA) revealed that fat reformulation of YICs using oligosaccharides results in a substantially diversified sensory profile. Generally, a 50% fat reduction of YICs using long-chain oligosaccharides appears to be a technologically tangible solution.     

Detailed transient numerical simulation of H2/air hetero-/homogeneous combustion in platinum-coated channels with conjugate heat transfer

Transient two-dimensional simulations of fuel-lean H₂/air combustion were performed in a 2-mm-height planar channel coated with platinum, using detailed hetero-/homogeneous chemistry and transport as well as heat conduction in the solid wall. The developed model resolved, for the first time, all relevant spatiotemporal scales in a practical channel-flow reactor configuration. A parametric study was carried out to investigate the effects of wall material, inlet velocity, and inlet temperature on the fundamental catalytic and gas-phase combustion processes. Computational singular perturbation (CSP) analysis identified the key catalytic reactions affecting light-off and homogeneous ignition. Homogeneous ignition crucially depended on the OH desorbing fluxes from the catalyst, while flame propagation and stabilization involved time scales of a few milliseconds. During the short duration of the light-off event, the ensuing Stefan velocity appreciably altered the flow field. Predictions of time accurate numerical simulations were further compared against those of a code relying on the quasisteady state assumption, and the specific conditions under which the latter was invalidated were identified. Finally, CSP analysis unraveled the reasons for the high computational cost of the fully transient 2-D simulations. The surface reaction mechanism exhibited a high stiffness with fastest time scales of the order of 10^-12${10}^{-12}$ s, pertaining to the hydrogen adsorption and to the H(s) + O(s) = OH(s) + Pt(s) reactions. These time scales were in turn six orders of magnitude shorter than the ones associated with gas-phase chemistry or with a simplified single-step catalytic reaction.     

Investigation of slag containing refractory materials for gasification processes

In gasification processes the reaction of carbon feedstocks with oxygen and water leads to production of synthetic gas. The development of a new gasification technique reduces the temperature at the liner wall in the range of 1300 °C. Thus, the currently used high chrome oxide based materials can be replaced by new chrome oxide free materials fulfilling economical as well as ecological aspects. In this contribution the performance of alumina castables with different brown coal ash-contents (slag containing refractory materials) and sintered in different atmospheres have been investigated according to their thermo-mechanical properties, phase formation as well as resistance against thermal shock and corrosion attack under gasification-similar conditions. The slag containing refractory material with 11 wt.% brown coal ash sintered in reducing atmosphere has shown the best results with regard to mechanical properties and corrosion resistance and will be a promising liner material for gasification processes up to 1400 °C.     

Resistivity index of fractional wettability porous media

The effects of fractional wettability on electrical resistivity index curves of porous media are investigated using pore network models. A bond percolation-and-fractal roughness model is used to simulate the oil/water drainage of the conventional porous plate method in pore networks composed of randomly distributed ‘strongly water-wet' and ‘strongly oil-wet' capillaries. Based on universal scaling laws of percolation quantities, effective medium approximation and fractal geometry, approximate analytic relationships are developed with respect to the dependence of the resistivity index, capillary pressure and saturation exponent on certain microstructural properties of the pore space and surface fractional wettability over the various water saturation regions. The simulated data are fitted to two-exponent power laws, which in turn are evaluated as macroscopic conceptual models of the resistivity index. At high water saturations, the saturation exponent becomes a strongly increasing function of the fraction of oil-wet pores when the value of this parameter exceeds the percolation threshold of the lattice network and oil percolates spontaneously through network joining clusters of oil-wet pores. At intermediate water saturations, the saturation exponent is a moderately increasing function of the fraction of oil-wet pores, whereas the slope of the capillary pressure curve remains almost unaltered to variations of wettability. At low water saturations, as the fraction of oil-wet pores becomes quite large, permanent trapping of water may occur with result that both the saturation exponent and the slope of the capillary pressure curve tend to infinity at the limit of irreducible water saturation. The exponents of the phenomenological models of the resistivity index change significantly with fractional wettability and are consistent with the values of the saturation exponent obtained with the approximate analytic relationships.     

A new approach for the characterization of the pore structure of dual porosity rocks

For the realistic representation of the pore space of dual porosity rocks, a new method of pore structure characterization is developed by combining experimental Hg intrusion/retraction curves with back-scattered scanning electron microscope (BSEM) images and inverse modeling algorithms. The pore space autocorrelation function measured by processing the digitized BSEM images is combined with the surface fractal dimension estimated from the high pressure Hg intrusion (MIP) data to derive a synthetic small-angle neutron scattering (SANS) intensity function, the inversion of which provides a volume-based pore body radius distribution (PBRD). The volume-based PBRD is fitted with a multimodal number-based PBRD consisting of two component distributions: one representing the macroporosity and another one representing the microporosity. Based on arguments of percolation theory, analytical mathematical models are developed to describe the Hg intrusion in and retraction from dual pore networks in terms of the complete PBRD, pore throat radius distribution (PTRD) of macroporosity, drainage accessibility functions (DAFs) of both porosities, and imbibition accessibility functions (IAFs) of both porosities. Inverse modeling of the Hg intrusion data set enables us to estimate the PTRD and DAFs. Inverse modeling of the Hg retraction datasets enables us to estimate a set of primary and secondary IAFs. The method is demonstrated by the pore structure characterization of four outcrop samples of carbonate and sandstone rocks. Analytic approximate equations developed from the critical path analysis (CPA) of percolation theory enable us to calculate explicitly the absolute permeability and the formation factor of the porous rocks using the estimated parameters (PBRD, PTRD, DAF) of the macroporosity. The measured permeability of cores is predicted satisfactorily and observed discrepancies may be attributed to large length-scale macro-heterogeneities which are not evident in BSEM images and Hg porosimetry data.     

Study of the thermal behaviour of alipharomatic polyesters around the glass–rubber transition region by thermomechanical analysis: the mobile and rigid amorphous fraction

The objective of this work was the study using thermomechanical analysis (TMA) of a peculiar behaviour, which was observed some years ago, around the glass–rubber transition region in some thermoplastic alipharomatic polyesters. For this purpose a series of nine alipharomatic polyesters was prepared by the two‐stage melt polycondensation method in a glass batch reactor and subjected to TMA in both penetration and expansion mode. Differential scanning calorimetry (DSC) was additionally used and the results are discussed focusing mainly on the first derivative curve of TMA thermograms in the penetration mode. From this curve, which shows two distinct peaks, the first peak could be attributed to the glass transition temperature (T_g) of the mobile amorphous fraction, since the value coincides with that obtained from DSC and is due to the abrupt shrinkage of the amorphous part of the sample. The second peak (up to 40 °C higher than T_g) is due most probably to the softening of the rigid amorphous fraction and the passage of the polymeric sample from the glass region to the cold crystallization region. When the sample is more crystalline than amorphous then the first peak is smaller or is completely absent. Copyright © 2006 Society of Chemical Industry