Wetting properties of polystyrene ionomers treated with plasma source ion implantation

The wetting properties of polystyrene‐based ionomers treated with plasma source ion implantation (PSII) were investigated by the measurement of water contact angles. When sulfonated ionomers were aged for a few days, the hydrophobic recovery for the ionomers became much slower than that for the nonionic polymers. However, when the samples were aged over 20 days, the water contact angle of the ionomers converged with that of the nonionic polymer. Thus, it was concluded that the ionic interaction between the ionic groups and the presence of ionic groups together resulted in the slow hydrophobic recovery and that the aging effect was significant for the ionomers. For the methacrylate ionomer of low ion content, on the other hand, it was found that the PSII treatment produced only a small change in hydrophobic recovery behavior. Thus, it was suggested that the low ionic content coupled with the small size of the ionic unit might cause changes only of a very insignificant degree in hydrophobic recovery behavior. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2500–2504, 2002     

Correlation of vapor-liquid equilibria for binary mixtures with free energy-based equation of state mixing rules: Carbon dioxide with alcohols, hydrocarbons, and several other compounds

The correlation of vapor-liquid equilibrium data for high-pressure carbon dioxide systems is of interest in a number of industrial applications, including supercritical extraction. Here, we consider the correlation of data for 12 binary systems of carbon dioxide separately with alcohols, with hydrocarbons, and with acetone, benzene, and water. The Wong-Sandler (W-S) and modified Huron — Vidal first order (MHV1) free energy-based equation of state mixing rules (the W-S and MHV1 models) were used in the calculations. Both combined equation of state+free energy models generally resulted in good correlations of the experimental data over wide ranges of temperature and pressure with temperature — independent parameters. However, for the carbon dioxide+water system, the W-S model produced an 11% average absolute deviation in pressure, while no parameter that resulted in an AAD in pressure of less than 20% could be found for the MHV1 model.     

Direct equivalence between geometric conditions and algebraic conditions for discrete-time nonlinear observer

Unlike the continuous-time case, algebraic necessary and sufficient conditions for a single output discrete-time system to be state equivalent to a nonlinear observer canonical form have been found and are easier to verify for those who are not accustomed to differential geometry. The geometric conditions look very different from the algebraic conditions. In this paper, we show direct equivalence of the geometric conditions and the algebraic conditions in order to enhance the understanding of the geometric conditions.     

A microfluidic device for thermal particle detection

We demonstrate the use of heat to count microscopic particles. A thermal particle detector (TPD) was fabricated by combining a 500-nm-thick silicon nitride membrane containing a thin-film resistive temperature detector with a silicone elastomer microchannel. Particles with diameters of 90 and 200 μm created relative temperature changes of 0.11 and ?0.44 K, respectively, as they flowed by the sensor. A first-order lumped thermal model was developed to predict the temperature changes. Multiple particles were counted in series to demonstrate the utility of the TPD as a particle counter.     

A porous mixed-valent iron MOF exhibiting the acs net: Synthesis, characterization and sorption behavior of Fe3O(F4BDC)3(H2O)3·(DMF)3.5

A new mixed-valent iron MOF, formulated as Fe₃O(F₄BDC)₃(H₂O)₃·(DMF)_3.5 (1), has been synthesized by using a perfluorinated linear dicarboxylate to link trigonal prismatic Fe₃(μ³-O)(O₂C–)₆ clusters. The structure refinement based on single crystal X-ray diffraction data collected from 1 reveals the material exhibits the acs topology with large channels along the crystallographic c-axis. Due to the presence of fluorine atoms the organic link, 2,3,5,6-tetrafluorobenzene-1,4-dicarboxylate (F₄BDC), has a 63° torsion angle between the carboxylate and aromatic planes, resulting in larger channels compared to those in the isoreticular material MOF-235. While few iron-based MOFs have demonstrated porosity, nitrogen and hydrogen sorption experiments carried out at 77 K proved the porosity of outgassed 1, which has a Langmuir surface are of 635 m²/g and a gravimetric capacity of 0.9 wt% of hydrogen at 1 bar.     

Selective CO oxidation in the presence of hydrogen over supported Pt catalysts promoted with transition metals

Selective CO oxidation in the presence of excess hydrogen was studied over supported Pt catalysts promoted with various transition metal compounds such as Cr, Mn, Fe, Co, Ni, Cu, Zn, and Zr. CO chemisorption, XRD, TPR, and TPO were conducted to characterize active catalysts. Among them, Pt-Ni/γ-Al₂O₃ showed high CO conversions over wide reaction temperatures. For supported Pt-Ni catalysts, Alumina was superior to TiO₂ and ZrO₂ as a support. The catalytic activity at low temperatures increased with increasing the molar ratio of Ni/Pt. This accompanied the TPR peak shift to lower temperatures. The optimum molar ratio between Ni and Pt was determined to be 5. This Pt-Ni/γ A1₂O₃ showed no decrease in CO conversion and CO₂ selectivity for the selective CO oxidation in the presence of 2 vol% H₂O and 20 vol% CO₂. The bimetallic phase of Pt-Ni seems to give rise to stable activity with high CO₂ selectivity in selective oxidation of CO in H₂-rich stream.     

A study on the factors for improving the ethanol production from Jerusalem artichoke by Kluyveromyces fragilis

This study is to investigate the factors influencing the alcohol production byKluyveromyces fragilis using the juice of Jerusalem Artichoke tubers. The cell growth rate and ethanol production rate were stimulated by aeration and by the addition of unsaturated fatty acids and the cell mass production and the ethanol production were substantially improved. It was found that oxygen and unsaturated fatty acids added played a decisive role on the increase of alcohol tolerance of yeast.     

Crystal shape monitoring and supersaturation measurement in cooling crystallization with quartz crystal oscillator

A crystallization monitoring system using a quartz crystal oscillator was utilized to predict different shapes of crystal formation by measuring crystal growth rate and to measure supersaturation. Applying different rates of cooling, crystal formation of different shapes was induced, and the frequency variation of the oscillator and the crystal shape observed with an SEM were compared to determine how the frequency variation can be interpreted for the prediction of produced crystal shape. The experimental results obtained from the crystallization of potassium nitrate and cupric sulfate solutions showed that the proposed frequency measurement technique could be applied in the prediction of crystal shape of cooling crystallization processes. In addition, supersaturation was determined from the measurements of solution and coolant temperatures.     

A study of cell nucleation in the extrusion of polypropylene foams

An investigation has been performed of the cell nucleation and initial growth behaviors in the foam processing of polypropylene (PP) in both the linear and branched forms. These materials were foamed in extrusion with the two blowing agents, CO₂ and isopentane. The cell density generally increased with an increased content of the blowing agent, for both CO₂ and isopentane. The effect of processing pressure on the cell density was distinct when CO₂ was used, whereas no pressure effect was observed in the foam processing with isopentane. The cell morphologies for the two PPs were found to be significantly different. A slightly lower nuclei density was observed in the branched PP foams than in the linear PP foams. However, the phenomenon of cell coalescence was observed much less in the branched PP foams. Most cells in the branched PP foams were closed, whereas in the linear PP foams they were connected to each other. The experimental results indicated that the branched structure played an important role in determining the cell morphologies through its effects on the melt strength and/or melt elasticity.     

Stearic acid unlike shorter-chain saturated fatty acids is poorly utilized for triacylglycerol synthesis and β-oxidation in cultured rat hepatocytes

Utilization of stearate as compared to various saturated fatty acids for cholesterol and lipid synthesis and β-oxidation was determined in primary culture of rat hepatocytes. At 0.5 mmol/L in the medium, stearate (18:0) adequately solubilized by albumin was less inhibitory to cholesterol synthesis from [2-¹⁴C] acetate than myristate (14:0) and palmitate (16:0) (68% vs. 91 and 88% inhibition, respectively). The rate of incorporation into cholesterol from [1-¹⁴C] stearate (3.0±0.6 nmol/mg protein/4 h) was 37-, 1.8-, and 7.8-fold of that from myristate, palmitate, and oleate, respectively. Conversely, the rate of [1-¹⁴C] stearate incorporation into total glycerolipids was 88–90% lower than that of labeled palmitate, myristate, and oleate. The rate of [1-¹⁴C] stearate incorporation into triacylglycerol (3.6±0.4 nmol/mg protein/4 h) was 6–8% of that from myristate, palmitate, oleate, and linoleate. The rate of stearate incorporation into phospholipids was the lowest among tested fatty acids, whereas the rate of mono- and diacylglycerol synthesis was the highest with stearate treatment. The rate of β-oxidation as measured by CO₂ and acid soluble metabolite production was also the lowest with [1-¹⁴C] stearate treatment at 22.7 nmol/mg protein/4 h, which was 35–40% of those from other [1-¹⁴C] labeled fatty acids. A greater proportion of stearate than other fatty acids taken up by the hepatocytes remained free and was not metabolized. Clearly, stearate as compared to shorter-chain saturated fatty acids was less efficiently oxidized and esterified to triacylglycerol in cultured rat hepatocytes.