Secondary side post regulator for improving cross regulation and reducing standby power consumption

The quest for improved energy savings is driving research into power converter high-efficiency operation under extremely light-load conditions. The use of multiple output converters to satisfy circuit needs and cost requirements adds additional complication to the standby mode power-consumption problem. This is due to the difficulty of satisfying both good cross-regulation under various load conditions as well as high efficiency in the standby mode simultaneously; because topologies that exhibit a good cross-regulation performance, such as resonant converters, generally have a poor efficiency problem under extremely light-loads. A secondary side post regulator (SSPR) is proposed to reduce the standby power consumption and to improve the cross-regulation performance of single- controller multiple-output channel power converters. It is capable of reducing the power consumption of the power converter as well as the SSPR. The SSPR is analysed using its operational principles and small signal models. A 110?W experimental prototype was built to verify the standby power consumption and cross-regulation performance using the proposed SSPR.     

Performance characteristics of SOI DRAM for low-power application

Process integration of cell capacitors that can circumvent the usual difficulties of large topographic height difference and high-temperature process are presented. A 16 Mbit silicon-on-insulator (SOI) DRAM with a 0.3 μm design rule is successfully fabricated and analyzed for processing integrity and circuit performance based on process integration of the cell capacitor using the pattern-bonded SOI (PBSOI) technology. Measurements for the strobe access time (tRAC) acid the operation current (I_ccl) show significant improvement (over 25%) for the SOI DRAM compared to those for the 16 Mbit bulk counterpart with the same circuit and layout. On the transistor side, ultra-low-voltage transistor technology using the body bias control schemes is also implemented and investigated. Devices with small leakage current and almost ideal subthreshold swing are obtained. The results give us guidance for transistor and process schematics for low-voltage DRAM application     

Subband-based blind signal separation for noisy speech recognition

A method for directly extracting clean speech features from noisy speech is proposed. This process is based on independent component analysis (ICA) and a new feature analysis technique for reducing the computational complexity of the frequency domain ICA. For noisy speech signals recorded in real environments, this method yielded a considerable performance improvement     

High Efficiency Perovskite Solar Cells Exceeding 22% via a Photo-Assisted Two-Step Sequential Deposition

One of the most effective methods to achieve high-performance perovskite solar cells (PSCs) is to employ additives as crystallization agents or to passivate defects. Tri-iodide ion has been known as an efficient additive to improve the crystallinity, grain size, and morphology of perovskite films. However, the generation and control of this tri-iodide ion are challenging. Herein, an efficient method to produce tri-iodide ion in a precursor solution using a photoassisted process for application in PSCs is developed. Results suggest that the tri-iodide ion can be synthesized rapidly when formamidinium iodide (FAI) dissolved isopropyl alcohol (IPA) solution is exposed to LED light. Specifically, the photoassisted FAI–IPA solution facilitates the formation of fine perovskite films with high crystallinity, large grain size, and low trap density, thereby improving the device performance up to 22%. This study demonstrates that the photoassisted process in FAI dissolved IPA solution can be an alternative strategy to fabricate highly efficient PSCs with significantly reduced processing times.     

Mechanoreceptor-Inspired Dynamic Mechanical Stimuli Perception based on Switchable Ionic Polarization

Diverse touch experiences offer a path toward greater human–machine interaction, which is essential for the development of haptic technology. Recent advances in triboelectricity-based touch sensors provide great advantages in terms of cost, simplicity of design, and use of a broader range of materials. Since performance solely relies on the level of contact electrification between materials, triboelectricity-based touch sensors cannot effectively be used to measure the extent of deformation of materials under a given mechanical force. Here, an ion-doped gelatin hydrogel (IGH)-based touch sensor is reported to identify not only contact with an object but also deformation under a certain level of force. Switchable ionic polarization of the gelatin hydrogel is found to be instrumental in allowing for different sensing mechanisms when it is contacted and deformed. The results show that ionic polarization relies on conductivity of the hydrogels. Quantitative studies using voltage sweeps demonstrate that higher ion mobility and shorter Debye length serve to improve the performance of the mechanical stimuli-perceptible sensor. It is successfully demonstrated that this sensor offers dynamic deformation-responsive signals that can be used to control the motion of a miniature car. This study broadens the potential applications for ionic hydrogel-based sensors in a human–machine communication system.     

Effective Periodic Poling in Optical Fibers

The distributions of electric field and induced second‐order nonlinearity are analyzed in the periodic poling of optical fibers. A quasi‐phase matching efficiency for the induced nonlinearity is calculated in terms of both the electrode separation distance between the applied voltage and generalized electrode width for the periodic poling. Our analysis of the quasi‐phase matching efficiency implies that the conversion efficiency can be enhanced through adjusting the separation distance, and the electrode width can be maximized if the electrode width is optimized.     

A Balun-BPF Using a Dual Mode Ring Resonator

In this letter, a Balun-bandpass filter (BPF) is proposed by using a dual-mode ring resonator. The Balun-BPF is not a simply combined or integrated component of a BPF and a Balun but a single BPF with the balun function. We obtained the proper balanced outputs and two-pole BPF characteristic by symmetrically placing the output ports at lambda/2 distance from each other on the dual-mode ring resonator. The fabricated Balun-BPF has a bandwidth of 40 MHz and an insertion loss of 2.4 dB at a center frequency of 2.45 GHz. The differences between the two outputs are 180-184deg in phase and within 1dB in magnitude. The measured frequency responses agree well with simulated ones.     

Home Health Gateway Based Healthcare Services Through U-Health Platform

The Ubiquitous Health, or u-Health, service is an IT health care service using the ubiquitous computing environment. U-Health provides customized medical services. As it is a service that has developed from the current hospital visiting medical system, the u-Health service provides a patient with healthcare anywhere and anytime. In this paper, we propose a home health gateway based healthcare services through the u-Health platform. Using home health gateway, u-Health can provide health monitoring, diet, and exercise services using the healthcare decision support module in the ubiquitous environment. This approach would offer specialized services using an external content provider of DB. In addition, a doctor can provide advice to patients using the monitoring service. The proposed u-Health platform provides effective services using home health gateway in ubiquitous environments to customers, which will improve the health of chronic patients.     

Least squares decoding in binomial frequency division multiplexing

This paper proposes a method that can reduce the complexity of a system matrix by analyzing the characteristics of a pseudoinverse matrix to receive a binomial frequency division multiplexing (BFDM) signal and decode it using the least squares (LS) method. The system matrix of BFDM can be expressed as a band matrix, and as this matrix contains many zeros, its amount of calculation when generating a transmission signal is quite small. The LS solution can be obtained by multiplying the received signal by the pseudoinverse matrix of the system matrix. The singular value decomposition of the system matrix indicates that the pseudoinverse matrix is a band matrix. The signal-to-interference ratio is obtained from their eigenvalues. Meanwhile, entries that do not contribute to signal generation are erased to enhance calculation efficiency. We decode the received signal using the pseudoinverse matrix and the removed pseudoinverse matrix to obtain the bit error rate performance and to analyze the difference.