The effects of harvest maturity,ripeness and storage on kiwifruit aroma

Quantitative gas chromatographic analysis of the volatile aroma components has been used as an objective measure of the effects of maturity at harvest, ripeness and storage on the aroma volatiles of kiwifruit. Increasing ripeness is associated with a rapid increase in the levels of aroma volatiles, especially esters, while increasing storage time prior to ripening is accompanied by a decrease in the amount of aroma volatiles.     

Asymptotic reduced-dimensional steering strategies for CMG singularity-free control

The geometric singularity problem is one of principal difficulty when using single-gimbal control moment gyros as spacecraft attitude control devices. To overcome singularity, new steering logics are suggested in this paper which results in a reduction in the difficulty of generating gimbal rates around a singular state. One of the suggested steering laws presented is the reduced dimensional singular value decomposition steering law, which adopts the singular value decomposition in reduced dimensional forms. Two other steering laws make use of the least square method in reduced dimensional forms. All of the suggested steering laws have been generated for the compensation of the torque insufficiency. These logics are verified mathematically and simulations at a singular condition and non-singular condition are performed to see how well they work.     

Optimization of the power ascension path for a boiling water reactor using genetic algorithms

To ensure the core status can meet the requirements of thermal limits, stability and other constraints during the power ascension process of a nuclear power plant, operators usually gradually increase power based on onsite measurements and experience. To reduce the operator’s burden, this research develops a method to find an optimal power ascension path that can be followed by operators. The power ascension path is formulated as a multiobjective optimization problem with the following constraints: power ascension time, thermal limits, core stability and maximum rod line. A genetic algorithm is adopted to obtain the optimal power ascension path. The results show that using our approach full power can be achieved quickly, while maintaining reasonable margins of thermal limit and stability, in addition to satisfying maximum rod line criteria.     

Analysis of color symbology from the perspective of cultural semiotics focused on Korean costume colors according to the cultural changes

The purpose of this study was to analyze the symbolization of colors as cultural codes, based on costume colors. In order to study the significance of colors in cultural changes, we carried out a quantitative analysis and interpreted it from the perspective of cultural semiotics. The range of this study was focused on Korean costume colors, over diverse diachronic stages of Korean culture. For this study 1535 color samples were collected, measured with a spectrophotometer, and analyzed quantitatively according their diachronic stages of origin. As a result, red, blue, and yellow were found to be the most frequently used colors during the Chosun Dynasty, a period based on Confucianism. These colors acted as cultural codes with cultural significance. During the Modern times pink, light blue, and black increased in frequency and represented the reception of western culture, the changing sex role of women in society, and utilitarianism. In these days, neutral colors and grayish tones of all colors are the most significant colors of high frequency. The use of such colors is closely related to industrialization, mechanization, functionalism, and the changes of women's sex roles in the societies. They are used as cultural codes, especially to emphasize a rational and masculine image rather than a feminine image. © 2006 Wiley Periodicals, Inc. Col Res Appl, 32, 71–79, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20290     

Development of the gel pond technology

A review of the development of the gel pond technology is presented. First, the emergence and growth of solar pond technology since the 1950's is described. The inherent problems encountered with the conventional salt gradient ponds are discussed, leading to the concept of the solar gel pond in which the salt gradient layer in the former is replaced by a transparent polymer gel. The major work in the first phase dealt with the experimental development of a polymer gel which met certain selection criteria. The criteria considered included transmissivity, stability of physical and chemical properties, high viscosity and other physical and optical properties. The gradual development of the polymer gel through an alternating process of testing and elimination and evaluation of relevant properties of the gel has been described. Modeling and optimization studies of the solar gel pond have been presented. Bansal and Kaushik's model for a salt gradient pond has been modified for a solar gel pond, and the results of the simulation are presented in a graphical form to serve as a quick reference for estimation of pond surface area, depth and flow rate for heat extraction depending on the extreme temperature required in the storage zone and the required heat load. Then, a cost-benefit economic analysis compares the economics of a solar gel pond with a conventional salt gradient pond. The construction of an experimental gel pond (18 m²) at The University of New Mexico is described, and the results of the study are summarized. Information on commercial scale ponds at Chamberino, New Mexico (110 m²), and in Albuquerque, New Mexico (400 m²), is provided. The review of the technology demonstrates the immense potential of the gel pond as a source of alternate energy for the years ahead.     

A genetic algorithm for the optimisation of assembly sequences

This paper describes a Genetic Algorithm (GA) designed to optimise the Assembly Sequence Planning Problem (ASPP), an extremely diverse, large scale and highly constrained combinatorial problem. The modelling of the ASPP problem, which has to be able to encode any industrial-size product with realistic constraints, and the GA have been designed to accommodate any type of assembly plan and component. A number of specific modelling issues necessary for understanding the manner in which the algorithm works and how it relates to real-life problems, are succinctly presented, as they have to be taken into account/adapted/solved prior to Solving and Optimising (S/O) the problem. The GA has a classical structure but modified genetic operators, to avoid the combinatorial explosion. It works only with feasible assembly sequences and has the ability to search the entire solution space of full-scale, unabridged problems of industrial size. A case study illustrates the application of the proposed GA for a 25-components product.     

Enhancement of hydrocyclone performance by controlling the inside turbulence structure

A new hydrocyclone was designed with a winged core fixed below the vortex finder in this study. With the winged core, the turbulence structure characteristics inside the hydrocyclone, including time-averaged pressure, pressure fluctuation, relative pressure fluctuation characteristics, and distribution characteristics of the probability density of the turbulence pressure, were all positively controlled. By controlling the turbulence structure, the performance of the new hydrocyclone was improved effectively. Compared with the common hydrocyclone, the new hydrocyclone was featured with lower energy loss coefficient, higher reduced separation efficiency, higher separation sharpness and larger capacity.     

Performance of asynchronous DS-CDMA using a maximal ratio combiningdiversity over a Rician fading channel

The final closed-form expression for bit error probability (BEP) is presented for a DS-CDMA system using a maximal ratio combining (MRC) diversity over a Rician fading channel. The accuracy of the BEP estimate evaluated by this expression is verified by comparison with a semi-analytic simulation result. The effect that diversity order has on the BEP is also considered for typical multipath delay profiles with different Rician ratios     

TES modeling for analysis of a video multiplexer

The transport of video images is likely to be a major application of high-speed networks of the future. These applications are capable of utilizing the high bandwidths that will become available with the advent of B-ISDN. In this paper, we propose a new methodology (called TES) for modeling the frame bitrate stream generated by compressed video sources. The main characteristic of this method is that it can model an arbitrary marginal distribution and approximate the autocorrelation structure of the random bitrate process generated by compressed frames. We present a modeling example utilizing this method, based on data from a video coding algorithm employing a layering technique. Using the source model, we develop a simulation model of a multiplexer of video sources. We show that this model can be used to address a number of design issues that arise in this class of problem. In particular, we show that for a layered video coding algorithm, it is possible to have a gain in the number of sources multiplexed at the cost of some loss of low priority packets.