新浦江城规划设计优劣分析

文章通过对上海“新浦江城”首期项目的介绍，分析了意大利设计在该项目应用中的独特之处，同时指出了存在的一些问题。指出国外设计应结合中国国情，符合社会发展的需要。     

Flows in rectangular microchannels driven by capillary force and gravity

Capillary phenomena was studied and discussed by the scholars about 200 years ago, but the progress was slow due to the limited equipment and manufacture precision of the microchannel. In recent years, because of the rapid development of MEMS and micromachining, many applications of the capillary flow is widely developing in some modern processes, such as underfilling of flip chip, flow in microfluidic chip or biochip, and a variety of other fields.     

Dual-Mode Microstrip Open-Loop Resonators and Filters

A miniature dual-mode microstrip open-loop resonator is proposed. Distinct characteristics of this new type of dual-mode resonator are investigated using full-wave electromagnetic simulations. It is shown that the two operating modes, i.e., the even and odd modes, within a single dual-mode resonator of this type do not couple. It is also found that there is a finite-frequency transmission zero inherently associated with the even mode. Two two-pole filters using this type of dual-mode resonator are demonstrated with opposite asymmetric responses, which result from different locations of the transmission zero. Higher order filters of this type are also investigated. Both simulated and measured results are presented.     

企业网络信息管理系统的总体设计

介绍了企业网络信息管理系统总体设计方案，提出了软、硬件的设计方案和实现方法。该系统可以实时掌握控制各职能部门的运营状况，有效地调配企业资源，提高企业的市场竞争能力。     

有梭织机光电探纬系统的改进

依据红外反射式光电探纬的组成和工作原理，对有梭织机光电探纬系统进行了改进。将反光装置（膜）固定在梭芯上，减少了反光装置的数量，无需改动梭子和纬管，系统探纬准确，减少了换梭时纡脚回丝。     

Effect of Cu concentration on the reactions between Sn-Ag-Cu solders and Ni

The reaction between the Sn-Ag-Cu solders and Ni at 250°C for 10 min and 25 h was studied. Nine different Sn-Ag-Cu solders, with the Ag concentration fixed at 3.9 wt.% and Cu concentrations varied between 0.0–3.0 wt.%, were used. When the reaction time was 10 min, the reactions strongly depended on the Cu concentration. At low-Cu concentrations (≦0.2 wt.%), only a continuous (Ni_1−xCu_x)₃Sn₄ layer formed at the interface. When the Cu concentration increased to 0.4 wt.%, a continuous (Ni_1−xCu_x)₃Sn₄ layer and a small amount of discontinuous (Cu_1−yNi_y)₆Sn₅ particles formed at the interface. When the Cu concentration increased to 0.5 wt.%, the amount of (Cu_1−yNi_y)₆Sn₅ increased and (Cu_1−yNi₆)₆Sn₅ became a continuous layer. Beneath this (Cu_1−yNi_y)₆Sn₅ layer was a very thin but continuous layer of (Ni_1−xCu_x)₃Sn₄. At higher Cu concentrations (0.6–3.0 wt.%), (Ni_1−xCu_x)₃Sn₄ disappeared, and only (Cu_1−yNi_y)₆Sn₅ was present. The reactions at 25 h also depended strongly on the Cu concentration, proving that the strong concentration dependence was not a transient phenomenon limited to a short reaction time. The findings of this study were rationalized using the Cu-Ni-Sn isotherm. This study shows that precise control over the Cu concentration in solders is needed to produce consistent results.     

A study on UV-curable coatings for HD-DVD: Primer and top coats

This study relates to the development of coatings for optical discs in high-density digital versatile disc systems (HD-DVD or blue lay disk) that use a high numerical aperture of 0.85 at 405 nm wavelength and have a protective top layer over a primer layer for protection against damage and dust. Ultraviolet-curable raw materials of two acrylic monofunctional monomers ( isobornylacrylate, IBA and tetrahydrofurfurylacrylate, THFA) and two kinds of urethaneacrylate oligomers (OUMD and OUME) have been easily mixed with photoinitiators. Curing rate of these materials was characterized by FT-IR. In case of top coats, VTES (vinyltriethoxysilane) and acrylic acid were added to enhance the abrasion resistance. These two kinds of UV-curable resinous materials having no solvent were synthesized and investigated as means for making a blue ray disk having good optical and mechanical properties. In addition, dynamic characteristics including reflectivity, fluctuation of RF signal and noise level were also investigated.     

Describing metal surfaces and nanostructures with orbital-free density functional theory

Orbital-free density functional theory (OF-DFT) can be made to scale linearly with sample size, allowing thousands of atoms to be treated explicitly with quantum mechanics. State-of-the-art kinetic energy density functionals and ion–electron pseudopotentials are used to obtain accurate structural property predictions for nanoparticles, nanowires, extended surfaces, and nanoindentation of simple metals.     

Microwave plasma synthesis of TiN and ZrN nanopowders

This work demonstrates that TiN and ZrN nanopowders can be prepared by microwave plasma synthesis method. The effects of flow rate of plasma forming gas, flow rate of carrier gas and feeding rate of precursor raw material to the average particle size were studied. The TiN and ZrN nanopowders were characterized by means of transmission electron microscopy (TEM) and X-ray diffraction (XRD).