Further study on the cooling correction in bomb calorimetry: Theoretical aspects of approximate formulae

On the basis of the compensation of errors it is postulated that the most accurate correction may not always give the most accurate result for calorific value, and experimental evidence for this is presented. A new criterion is therefore suggested for judging the best (not necessarily the most accurate) cooling correction. Using this principle the cooling correction formula previously proposed is improved which results in higher accuracy whilst retaining the original simplicity.     

Motion and structure interpretation of an optical switch

This paper focuses on tracking, reconstruction and motion estimation of a well-defined MEMS optical switch from a microscopic view. For out-of-view reconstruction, a homography capable of transforming feature points and feature lines between a microscopic image and a CAD model of the switch is implemented. The homography between two sequential microscopic images is decomposed and factorized for motion estimation. Optical flow has also been explored to provide rough estimations of rotation centre and angle. The paper also illustrates motion parameter optimization principles to deal with uncertainty inherent in micro world. After non-linear optimization, estimation accuracy for rotation angle and rotation centre can reach 0.06° and pixel level, respectively.     

Magnetic properties and thermal stability of CoFeNi-based amorphous films

CoNiFe-based amorphous films were magnetron-sputtered to investigate their structural and magnetic properties, including annealing-induced effects and interfacial influence from additional layers of Ta and Cu. The amorphous structure was confirmed by diffraction experiments. The magnetic measurements showed a well-defined uniaxial anisotropy in plane, arising possibly from atom oblique incidence effects competing with the stray field of the magnetron. The anisotropy could be influenced by using a Ta buffer layer, though the interfacial reaction gives rise to a dead layer. A coercive force H _c of 1–2 Oe and a magnetization of 680 emu/cm³ were measured at room temperature; properties which show promise for application in magnetotunneling junction devices. Thermal analyses showed a two-stage crystallization behavior, which started at 400°C and ended at about 600°C. The Curie temperature of the amorphous phase was estimated to be about 440°C.     

真空制盐蒸发结晶器的设计与实践

真空蒸发制盐外热式强制逆循环轴向出料蒸发结晶器，经多个厂家生产应用实践证明是成功的，具有生命力的。这种新型结构，作为一项新技术新设备应加强研究，总结提高，推广应用。不断完善。文章从流体力学、结晶机理角度要求，到具体工程设计参数和材质选用。论述了该罐的特点。     

Optimal diagonal precoder for multiantenna communication systems

In this paper, we examine a multiantenna single-user wireless communication system fitted with a QR-based successive cancellation receiver (QR receiver). Initially, our consideration is confined to uncoded binary phase shift keying (BPSK) signals transmitted through independent and identically distributed (IID) Rayleigh fading channels and to the design of an optimum precoder for the transmitter. For minimum feeding back of the channel state information (CSI) to the transmitter from the receiver, we stipulate the precoder to be in the form of a power loading square diagonal matrix. We proceed to develop the theory for the design of this diagonal matrix based on the minimization of the lower bound of the average bit error rate (BER) of transmission. The design obtained provides substantially lower error rates than most of other existing schemes under the same environment. The corresponding gain in signal-to-noise ratio (SNR) can be several decibels. To further improve the performance, we extend the design to include an optimal detection order of the received bits using an iterative approach. This iterative process proves to have fast convergence and results in a design providing significant SNR gain. We also propose a subchannel dropping scheme for cases in which SNR is low, and when the minimum BER precoder is equipped with this scheme, its average performance can be substantially superior to the Vertical Bell Laboratories Layered Space-Time (V-BLAST) detection. We extend our design of the optimum precoder to quadrature amplitude modulation (QAM) modulation scheme and similar performance gain has been observed.     

Studies on the microstructure of the black-glazed bowl sherds excavated from the Jian kiln site of ancient China

The Jian kiln, located in present-day Jianyang county of Fujian province, mainly produced black-glazed tea bowls. Jian tea bowl was used as a utensil for tea tasting and was greatly appreciated by emperor Huizong of the Northern Song dynasty. The black glaze of Jian bowl was sometimes marked with streaks or spots, usually called “hare's fur” or “oil spot”, which are the crystalline markings of iron oxide precipitated during firing in the dragon kiln. In this study, black-glazed Jian bowl sherds excavated from the late Northern Song strata of Luhuaping and Daluhoumen Jian kiln sites were adopted as test samples. Based on the physico-chemical foundation for the formation of glaze microstructure, the correlation among composition, microstructure, and visual appearance has been investigated by means of energy-dispersive X-ray fluorescence, X-ray diffraction, and field emission electron microscopy. For the first time, the study provides realizing proofs for two kinds of microstructural forming mechanics.     

校园文化与大学发展

校园文化看不见、摸不着，却支撑着大学的脊梁，它潜移默化影响和造就一所大学的文化品格。它不仅对大学发展起着重要作用，也是大学发展的重要内容，是大学建设的题中应有之义。为此，需要建设民主和谐，具有学术自由、人文精神和创新精神的校园文化，并将它提高到学校战略发展的高度来看，以校园文化整合学校发展战略。     

An investigation into physicochemical characteristics of ash produced from combustion of oil palm biomass wastein a boiler

Ash derived from combustion of Malaysian oil palm biomass (empty fruit bunches consisting of fibers) was physically and chemically characterized in order to provide a comprehensive understanding of its specific properties in terms of toxicity, compositions and reusability. Principal analyses conducted include particle size distribution, scanning electron microscopy, elemental dispersive X-ray, elemental analysis, toxicity characteristic leaching procedure (TCLP) as well as thermogravimetric, X-ray diffractometry and Fourier-transform infrared analyses. TCLP result indicated that the oil palm ash (OPA) should not be classified as toxic wastes in terms of heavy metal leachability since leachable copper, cadmium, lead and nickel concentrations were detected below the stipulated leachability limits. It was determined that the OPA contained high amount of potassium as well as presence of silica which implied its suitability to be reused as crude fertilizer or cement replacement material.     

基于FPGA乘法器架构的RNS与有符号二进制量转换

RNS(余数数制系统)是一种整数运算系统,在粒度精确性,能源损耗和响应速度上有很大的优势.从RNS到二进制数的输入输出转换是基于余数算法的专用架构实现的关键.本文提出了一个基于N类模的RNS与有符号二进制量的通用转换算法在FPGAs的乘法器上的实现过程.该算法能更有效地进行有符号数与RNS的转换.基于该算法类型乘法器在同类型乘法器中显示出了速度优势.文章中该架构被映射到Altera的10K系列的FPGA上.