国外钻井液和完井液用聚合物

９０年代以来，国外钻井液和完井液用聚合物添加剂的发展取得长足进步。本文介绍了国外目前用于钻井液和完井液的聚合物添加剂的类型及作用。     

高可靠镀Ni／Au工艺及其在微波PTFE电路上的应用

介绍了高可靠电镀Ｎｉ／Ａｕ工艺在ＰＴＦＥ微波印制电路上的应用，并分析了氨基磺酸盐镀软镍和亚硫酸盐镀软金工艺的影响因素及提高Ｎｉ／Ａｕ镀层之间附着力的措施。通过实验及应用证明了与直接镀金工艺相比，在软基材ＰＴＦＥ敷铜箔板上镀Ｎｉ／Ａｕ工艺能大大提高微波电路的可焊性，高温稳定性和长期可靠性，并且用其所制作的微波器件的高频性能也优于直接镀金工业。     

Visual results after submacular surgery for neovascularization in age-related macular degeneration

Orthopedists being more engaged in surgery are often asked about problems concerning exercise science. This article will summarize the existing basic knowledge, very close to practice, and put down the leading steps of how to build up a (therapeutical) training programme. A lab block is recommended acting on a preventive as well as on a sportive medical base.     

寻找非构造油气藏的新思路

目前,一种新的理论体系和研究方法已经形成,并正在发展和逐步完善。那就是层序地层学和油气成藏系统理论的诞生和发展;以及由计算机的快速发展带动起来的地震测井资料的采集、处理、显示和各种地质问题的计算机模拟技术,使得地质学和石油地质学都在朝着从定性到定量,从推测到更科学的预测方向发展。在今后的5～10年中,中国的石油地质家们不仅要注意方法和技术方面的进步,还应当重视在陆相层序地层学和陆相层序中油气成藏机制等基本理论方面的研究。     

Analysis of dispersion characteristics for a circular dielectric waveguide with periodic metallic strips by using the method of lines

The dispersion characteristics of circular dielectric waveguide with periodic metallic strips are analyzed by the method of lines. The filter property of the metallic strip loaded structure is carefully investigated for both TE and TM modes. The brillioum diagrams for both TE₀₁ and TM₀₁ modes are given. A comparison is made between the results obtained by Galerkin's method and those calculated with the method of lines, and very good agreement has been found; the accuracy of the present method is thus justified. On the basis of the analysis, some useful guidelines for the design of the bandreject filters are suggested.     

蒙特卡罗方法在空间辐射制冷器理论分析及热设计计算中的应用

介绍了二级抛物面型辐射制冷器的热物理模型及用蒙特卡罗方法数值模拟解决其热流理论和辐射热耦合表面（漫发射、镜反射）辐射热交换的处理方法。     

The importance of electrochemistry-related etching in thegate-groove fabrication for InAlAs/InGaAs HFETs

For the first time, the surface metal on nonalloyed ohmic electrodes is found to significantly change the profiles of gate grooves, when resist openings are employed to monitor drain current during wet-chemical gate recess for sub-micron InAlAs/lnGaAs heterojunction field-effect transistors (HFETs). The surface metal of Ni enhances the etching rate in comparison with that in the absence of electrodes by a factor of 4 and 10, laterally and vertically, which is favorable to fabricate deep gate grooves with small side etching. The Pt surface metal, however, leads to preferential etching of InGaAs over InAlAs, which can be useful to realize large side etching. The existence of an electrochemistry-related etching component, which arises when the ohmic electrodes are present during recess etching, is considered to be responsible for these behaviors     

复杂目标近场电磁散射的可视化计算方法

首次介绍了复杂目标近场散射计算的可视化方法。采用非均匀有理Ｂ样条曲面（ＮＵＲＢＳ）精确构造任意形状散射体，结合几何体近场透视变换和Ｚ－Ｂｕｆｆｅｒ技术实现了基于Ｗｉｎｄｏｗｓ平台的近场散射计算。提出广义雷达散射截面的概念并给出的若干算例。该方法充分利用了计算机３Ｄ图形设备的几何运算能力，运算速度快，严谨高，可扩展性好。     

Leiomyomatosis peritonealis disseminata. Two case reports

AIM: To study the action of quercetin (Que) on inhibiting platelet aggregation. METHODS: Active oxygen free radicals produced by xanthine/xanthine oxidase (Xan/XO) reaction was used, platelet aggregation was determined by the turbidimetric method, and the Xan/XO oxyradicals generating reaction by luminol-dependent chemiluminescence (Che) method. RESULTS: Active oxygen free radicals enhanced the platelet aggregation induced by ADP 1.6 mumol.L-1. The rate of maximal aggregation increased from 29%-38% for ADP to 59%-70% for ADP + Xan/XO. The enhancement was abolished by the treatment of platelet-rich plasma (PRP) with Que 650 mumol.L-1 or hydrocortisone (Hyd) 900 mg.L-1. Both Que and Hyd scavenged the active oxyradicals in vitro. The Che was decreased by 75.7% (Que 4 mumol.L-1) and 79.0% (Hyd 900 mg.L-1) as compared with control. CONCLUSION: Active oxygen free radicals participated in the platelet aggregation, and scavenging oxyradicals by Que was one of mechanisms of inhibiting platelet aggregation.