Synthesis and characterization of poly(ethyl vinyl ether) containing the NLO-phore 4′-oxy-4-nitrostilbene in the side chain

Summary 4-(2-Vinyloxyethoxy)-4-nitrostilbene 2 was prepared by the reaction of 4-hydroxy-4-nitrostilbene 1 with 2-iodoethyl vinyl ether. Monomer 2 was polymerized with cationic initiators to obtain a poly(ethyl vinyl ether) with the NLO-phore 4-oxy-4-nitrostilbene in the side chain. The resulting polymer 3 was soluble in common solvents such as chloroform and DMSO. The inherent viscosities of polymer 3 were in the range of 0.25–0.30 dL/g in chloroform. Polymer 3 showed a good thermal stability in TGA thermogram. Solution-cast films were cloudy and brittle with a T_g of 63°C.     

Concentration of tocopherols from soybean sludge by supercritical carbon dioxide

A supercritical fluid extraction method has been applied to test the feasibility of tocopherol concentration from soybean sludge with carbon dioxide at temperatures and pressures ranging from 35 to 70°C and 200 to 400 bar, respectively. The supercritical solubility of the esterified soybean sludge was over 4–6 times greater than that of the original soybean sludge. By a simple batch-type one-stage method the tocopherols in the esterified soybean sludge could be concentrated up to 40 wt%. The overall results of the present study show that soybean sludge initially containing about 13–14 wt% tocopherols may require a countercurrent multistage column to be highly and effectively concentrated.     

The effect of composition on thermal,mechanical, and morphological properties of thermotropic liquid crystalline polyester with alkyl side-group and polycarbonate blends

A thermotropic liquid crystalline polymer (LCP) with an alkyl side-group was synthesized. Blends of the LCP with polycarbonate (PC) were prepared by coprecipitatton from a common solvent. The rheological behavior of the LCP/PC blends was found to be very different from that of PC, and significant viscosity reductions were observed in the temperature range of 200–230°C. Blends of different LCP compositions were extruded with different draw ratio from a capillary rheometer. The ultimate tensile strength showed a maximum at a 10 wt% LCP composition in the blends. It decreased for compositions greater the 10 wt% LCP, whereas the initial modulus increased with increasing LCP content. The morphology of the blends was found to be affected by their compositions. Scanning electron microscopy (SEM) studies revealed finely dispersed spherical LCP domains in the PC matrix. The SEM micrographs also showed a poor adhesion between the two phases.     

Organic-inorganic hybrid materials from a new octa(2,3-epoxypropyl)silsesquioxane with diamines

Hybrid materials based on a new polyhedral oligomeric silsesquioxane, octa(2,3-epoxypropyl)silsesquioxane (OE) with diamines of 4,4′-methylenedianiline (DDM) and 5-trifluoromethyl-1,3-phenylenediamine (FPA) were prepared and characterized. OE was synthesized from cage-structured octaallylsilsesquioxane (OA) with m-chloroperbenzoicacid. The FTIR studies suggested that the N-H bond in diamines was not completely reacted with epoxy group due to steric hindrance and also extensive hydrogen bonding existed in the hybrid materials. The retention of the cage structure in the prepared hybrid materials was suggested by the FTIR and ²⁹Si NMR studies. The OE/FPA hybrid materials had superior thermal/mechanical characteristics than the OE/DDM due to the higher rigidity of the FPA than that of DDM or the silicon-fluorine interaction enhancing crosslinking reaction or hydrogen bonding. The prepared OE/FPA had a T_g of 170 °C, which was higher than diglycidyl ether of bisphenyl A (DGEBA)/DDM at the same stoichiometric ratio. It also had excellent thermal, mechanical, and dielectric characteristics with high storage modulus of 1.8 GPa (30 °C) and 0.3 GPa (250 °C), low coefficient of thermal expansion of 86 μm/m °C, and dielectric constant of 2.19. Thus, it can be high performance materials with potential applications for electronic packaging.     

A porous mixed-valent iron MOF exhibiting the acs net: Synthesis, characterization and sorption behavior of Fe3O(F4BDC)3(H2O)3·(DMF)3.5

A new mixed-valent iron MOF, formulated as Fe₃O(F₄BDC)₃(H₂O)₃·(DMF)_3.5 (1), has been synthesized by using a perfluorinated linear dicarboxylate to link trigonal prismatic Fe₃(μ³-O)(O₂C–)₆ clusters. The structure refinement based on single crystal X-ray diffraction data collected from 1 reveals the material exhibits the acs topology with large channels along the crystallographic c-axis. Due to the presence of fluorine atoms the organic link, 2,3,5,6-tetrafluorobenzene-1,4-dicarboxylate (F₄BDC), has a 63° torsion angle between the carboxylate and aromatic planes, resulting in larger channels compared to those in the isoreticular material MOF-235. While few iron-based MOFs have demonstrated porosity, nitrogen and hydrogen sorption experiments carried out at 77 K proved the porosity of outgassed 1, which has a Langmuir surface are of 635 m²/g and a gravimetric capacity of 0.9 wt% of hydrogen at 1 bar.     

Effectiveness test of alginate‐derived polymeric surfactants

A series of alginate‐derived polymeric surfactants (APSs) with a linear alkyl group (C8, C12, C16) was synthesized by oxidation followed by reductive amination of 2,3‐dialdehydic alginate. The products were characterized by measuring IR spectra, NMR spectra, surface tension and critical micelle concentration (cmc). They were also tested for the solubilization of azobenzene and adsorption of heavy metal. In the case of 40% CHO‐C8 APSs, the lowest interfacial tension value (31.5 m Nm^?1) was obtained at the cmc value of 1.35 g dm^?3. The dissolving capacity of 40% CHO‐C8 APS towards azobenzene was 27 times greater than that of alginate. The overall cobalt (Co²⁺) removal efficiency by adsorption using APSs was high compared with that of sodium alginate at pH 3, 5 and 7. Equilibrium aspects of cobalt adsorption onto 10% CHO‐APSs were studied, and the results show that APSs had high equilibrium capacities for cobalt uptake, 115.5 mgg^?1. © 2002 Society of Chemical Industry     

Cure kinetics of high performance epoxy resin systems

Summary Isothermal cure kinetics ofEPON HPT 1071/DDS system have been performed by means of differential scanning calorimetry. The maximum cure rate and the extent of conversion at various DDS concentrations were studied as a function of cure temperature. Maximum cure rate increases with increasing cure temperature and DDS concentration. At various DDS concentrations, the maximum cure rate occured between 19–22% conversion. In order to evaluate the kinetic parameters, numerical calculations by means of a Newton-Raphson technique and experimental results obtained from the peak of reaction rate curve were undertaken.     

Monitoring the cure of unsaturated polyester resins by pressure DSC and FTIR-PLC

A high pressure differential scanning calorimeter (DSC) and a Fourier transform infrared (FTIR) spectrometer with a prism liquid cell (PLC) were used to monitor the reaction kinetics of styrene-unsaturated polyester resins at elevated curing temperatures and pressures. The thermal method is easy to perform but provides only an overall reaction exotherm. The spectroscopic method can detect the detailed reaction mechanism of copolymerizations. It is, however, less quantitative and the calculation is much more time-consuming compared to the thermal analysis. Reactions of two unsaturated polyester resins with different molecular structure were measured by these two methods. Results showed that applying cure pressure on unsaturated polyester resins reduced the reaction rate but increased the final conversion. The styrene reaction was enhanced more than the polyester reaction at high curing temperatures.     

Polymer gel electrolytes prepared from P(EG‐co‐PG) and their nanocomposites using organically modified montmorillonite

Polymer gel electrolytes were prepared by thermal crosslinking reaction of a series of acrylic end‐capped poly(ethylene glycol) and poly(propylene glycol) [P(EG‐co‐PG)] having various geometries and molecular weights. Acrylic end‐capped prepolymers were prepared by the esterification of low molecular weight (M_n: 1900–5000) P(EG‐co‐PG) with acrylic acid. The linear increase in the ionic conductivity of polymer gel electrolyte films was observed with increasing temperature. The increase in the conductivity was also monitored by increasing the molecular weight of precursor polymer. Nanocomposite electrolytes were prepared by the addition of 5 wt % of organically modified layered silicate (montmorillonite) into the gel polymer electrolytes. The enhancement of the ionic conductivity as well as mechanical properties was observed in the nanocomposite systems. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 894–899, 2004