Stage-efficiency of centrifugal extractor used in nuclear industry

1　INTRODUCTIONComparedwithamixer settlerorpulsedcolumnusedinthenuclearfuelreprocessingextraction pro cesses,ashort residence timecentrifugalextractorcatchesresearcher seyesbecauseofthe goodphaseseparationandasmallhold upvolume .Itshowsthefollowingadvantagesinthenuclearindustry[1] :1)Reducingsolventdegradationduetoradiation ;2 )Reducinginventoryofaqueousandorganicphases ,whichgivesrapidstart upandshut down ;3)Com pactdesignthatcontributestothereductionofplantcost .Manydifferenttypesofcen…     

金属注射成形技术进展

分析了影响金属注射成形（ＭＩＭ）产业化进程的两个主要技术因素，即适合ＭＩＭ要求的原料粉末的生产方法和ＭＩＭ生产工艺，并概述了目前ＭＩＭ技术的发展状况。     

液压凿岩机活塞与缸体之间间隙的设计计算

根据液压凿岩机活塞的运动规律，建立了活塞运动微分方程，推导了其运动学参数的解析表达式。研究了液压凿岩机活塞与缸体间隙密封段的局部温升和能量损失，建立了其数学模型，根据该模型可以求得活塞与缸体之间合理的间隙范围。     

烧结工艺对β-氮化硅陶瓷的影响

以β-Si3N4粉末为原料,以YAG（钇铝石榴石）为烧结助剂,通过气氛压力烧结（GPS）制备出致密的β-氮化硅陶瓷材料,形成大小均匀的柱状颗粒和小球状颗粒复合显微结构,研究了烧结助剂质量分数、烧结温度以及保温时间对β-氮化硅陶瓷致密化程度及力学性能的影响.     

功能陶瓷现状与发展动向

本文重点论述了功能陶瓷材料，原料粉体、工艺与装备、元器件市场的现状及其发展趋势。指出了功能陶瓷在现代科技领域中具有重要意义及广阔的应用前景。     

Preparation and characterization of soluble polyimides

Two kinds of soluble polyimides from pyromellitic dianhydride with Congo red and 4-sulfanilamide were prepared, respectively. Their structures were characterized by IR and ¹H-NMR, and the thermal properties were investigated by DSC and TG–DTA. © 1995 John Wiley & Sons, Inc.     

改性聚苯醚(MPPO)工程塑料国内外发展现状

综述了聚苯醚、共混改性聚苯醚、相容剂改性聚苯醚、热固性聚苯醚和阻燃聚苯醚工程塑料的国内外进展。介绍了其在工程塑料领域的消费量和消费分布以及在覆铜板中的应用。     

应用漆雾凝聚剂的体会

漆雾除渣系统是涂装生产线必备的装置，本文简要介绍应用漆雾凝聚剂的体会。     

树脂传递模塑工艺中工艺参数对树脂-纤维界面的影响

本文系统研究了工艺参数对由树脂传递模塑成型的复合材料的拉伸强度和树脂-纤维界面的影响.这些参数包括注射压力和模腔/纤维毡的温度.在较低的注射压力和较高的成型温度下,纤维得到良好的浸润和粘结,成型复合材料的拉伸强度也较高.     

Poly(butylene succinate)/poly(vinyl phenol) blends. Part 1. Miscibility and crystallization

Miscibility has been investigated in blends of poly(butylene succinate) (PBSU) and poly(vinyl phenol) (PVPh) by differential scanning calorimetry in this work. PBSU is miscible with PVPh as shown by the existence of single composition dependent glass transition temperature over the entire composition range. In addition, the polymer–polymer interaction parameter, obtained from the melting depression of PBSU using the Nishi–Wang equation, is composition dependent, and its value is always negative. This indicates that PBSU/PVPh blends are thermodynamically miscible in the melt. Preliminary morphology study of PBSU/PVPh blends was also studied by optical microscopy (OM). OM experiments show the spherulites of PBSU become larger with the PVPh content, indicative of a decrease in the nucleation density, and the coarseness of PBSU spherulites increases too with increasing the PVPh content in the blends.