Size-dependent magnetoelectric response of (Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3)-(Ni0.8Zn0.2)Fe2O4 particulate composites

In this paper, we investigated the effect of magnetic grain size on magnetoelectric responses of particulate magnetoelectric 0.7(Bi_0.5Na_0.5TiO₃-Bi_0.5K_0.5TiO₃)-0.3(Ni_0.8Zn_0.2)Fe₂O₄ (BNKT-NZFO) composites. The coexistence of two chemically separated phases was confirmed using x-ray diffraction analysis. The composites had homogeneous microstructure with controlled grain size. The magnetoelectric response of the BNKT-NZFO composites sensitively depended on the grain size of the NZFO phase and the magnetoelectric voltage coefficients presented a marked enhancement of 33% in the engineered grain size range. This result indicated that tailoring the magnetic grain size physically will provide a powerful mean of enhancing magnetoelectric coupling in a two-phase particulate composite, with large potential application in area of magnetic field sensor.     

浅谈新车型涂装生产准备通过性分析

以奇瑞公司某涂装线为例,对新车型在该涂装线进行生产试制前的非标及机械化设备的通过性进行分析介绍。     

Facile and rapid synthesis of multiferroic TbMnO3 single crystalline

The pure single phase of multiferroic material TbMnO₃ powders were successfully synthesized by one-step molten salt synthesis (MSS) method in the NaCl–Na₂SO₄ eutectic salts at the temperature as low as 800 °C for 1 h. The temperature of synthesized high purity TbMnO₃ is limited in a very narrow range. Prolonging the sintering time will not have an effect on the purity of samples, and either lower or higher salt concentration is not conducive to form pure TbMnO₃. The obtained TbMnO₃ was indexed to an orthorhombically distorted perovskite phase. The as-prepared crystals exhibit uniform and regular rhombic-like morphology with an average size of about 2 μm in edge length and 1–2 μm in thickness. The elements Mn and Tb in TbMnO₃ exist dominantly as Mn³⁺ and Tb³⁺, respectively. The magnetic measurements of the TbMnO₃ powders exhibit antiferromagnetism. Because of the simplicity and generalizability of the MSS method, it is reasonable to expect that the MSS method could also be exploited in future works which involves the nanoscale investigation of ferroelectric, ferromagnetic and multiferroic materials.     

Detailed model and investigation of gain saturation and carrier spatial hole burning for a semiconductor optical amplifier with gain clamping by a vertical laser field

A detailed model for semiconductor linear optical amplifiers (LOAs) with gain clamping by a vertical laser field is presented, which accounts the carrier and photon density distribution in the longitudinal direction as well as the facet reflectivity. The photon iterative method is used in the simulation with output amplified spontaneous emission spectrum in the wide band as iterative variables. The gain saturation behaviors and the noise figure are numerically simulated, and the variation of longitudinal carrier density with the input power is presented which is associated with the on-off state of the vertical lasers. The results show that the LOA can have a gain spectrum clamped in a wide wavelength range and have almost the same value of noise figure as that of conventional semiconductor optical amplifiers (SOAs). Numerical results also show that an LOA can have a noise figure about 2 dB less than that of the SOA gain clamped by a distributed Bragg reflector laser.     

离心式制冷压缩机故障的模糊综合诊断

在离心式制冷压缩机故障的诊断过程中,通过模糊综合诊断体系的建立,以构造模糊诊断矩阵,再由现场观测到症状和数据,以确定严重程度值,并进行故障的模糊综合诊断。依据最大隶属度原则,就可确定压缩机故障的主要原因。利用模糊综合诊断法,可有效提高诊断结果的准确性。     

电子测量仪器的可靠性鉴定试验

本文主要描述如何进行电子测量仪器可靠性鉴定试验.     

围护结构对钢结构工业厂房抗震性能影响的研究进展

在以往的单层钢结构工业厂房设计中,大多未考虑围护结构对厂房整体抗震性能的影响,但国内外研究成果表明,围护结构在自身平面内具有很大的剪切刚度,对厂房的整体抗震性能有很大影响.随着单层预制工业厂房的广泛应用,围护结构的设计也日趋复杂,其设计分析方法逐渐成为厂房设计中的重要问题.本文系统总结了单层预制工业厂房在历次典型地震中...     

关于高层住宅小区规划设计的思考与实践

本文对高层住宅小区规划设计进行研究与探索,并结合工程实践具体分析,发掘适合中国特色的高层住宅规划设计理论和方法。     

置换新风系统的施工作法

锋尚国际公寓的置换新风系统是天棚低温柔和辐射采暖制冷系统的一个重要配套系统,它采用下送上回的气流组织形式,在施工中采取有效的质量保证措施,确保了该系统能获得更优的空气品质。     

高位转换耗能减震结构新体系

本文总结了高位转换结构体系的研究与应用情况,分析了高位转换结构体系在实际应用中存在的问题和不足;为解决高位转换结构体系存在的本质问题,提出了将耗能减震技术应用于高位转换结构体系中,形成高位转换耗能减震结构新体系;探讨了该新体系的优越性和在实际工程中应用应解决的问题。