Degumming of Tasar silk using imidazolium-based ionic liquids

Abstract

In the present work, degumming of Tasar silk was carried out using novel reagents, the ionic liquids (ILs), 1-butyl-3-methylimidazolium chloride [BMIM]Cl and 1-butyl-3-methyl-imidazolium hydrogen sulphate [BMIM]HSO₄.The results on weight loss, tensile strength loss and absorbency were compared with soda ash-H₂O₂ method. These treatments were carried out under conventional heating, sonication and microwave irradiation as different techniques of energy input. The ILs showed higher weight loss and absorbency with negligible strength loss as compared to the soda ash-H₂O₂ method, [BMIM]Cl being the most effective with further advantage of working at nearly neutral pH. The treatments under sonication and microwave showed increasingly higher efficiency as compared to the conventional heating. The chemical structure of Tasar silk, as estimated by FTIR spectroscopy, and the crystalline structure, as elucidated by X-ray diffraction, remained unchanged. SEM images showed that the surface of Tasar silk degummed with ILs was smoother. The dye uptake was nearly the same for all degummed samples. A further advantage is accrued by recyclability of ILs, which makes the process cost effective.     

Pegylated protein encapsulated multivesicular liposomes: a novel approach for sustained release of interferon alpha

Hepatitis C viral chemotherapy suffers from a relatively short half-life of the interferon alpha-2a (IFN alpha). To address this issue, we investigated the effects of polyethylene glycol modification and their subsequent encapsulation in multivesicular liposomes (MVLs), on the release properties of IFN alpha. In the present study, interferon-alpha was conjugated with methoxy-polyethylene glycol (mPEG, MW 5000). Prepared IFN alpha-mPEG5000 conjugate (IFN alpha-mPEG5000) was purified with size exclusion chromatography. The relative in vitro anti-viral activity of pegylated interferon alpha-2a was found to 87.9% of the unmodified IFN alpha. Pegylated IFN alpha encapsulated multivesicular liposomes were prepared by double emulsification technique followed by evaporation of organic solvents from chloroform ether spherules suspended in water. Prepared MVLs were then characterized for shape, size, vesicle count, encapsulation efficiency, and in vitro release rate. In process stability studies of pegylated IFN alpha protein exhibited better stability when exposed to chloroform: diethyl ether (1:1 ratio) mixture as well as variable vortexing time as compared to native IFN alpha. Relatively high percentage of encapsulation of protein ( approximately 75%) was achieved. In vitro release profile of pegylated IFN alpha-mPEG5000 containing MVLs in the PBS showed lower initial burst release with sustained and incomplete release over a period of 1 week. In contrast, native IFN alpha entrapped MVLs were observed as higher initial burst release, i.e., nearly 35% followed by almost complete release. The results confirmed the possibility of multivesicular liposomes as a long-acting or sustained-release delivery system using a combination of pegylation and encapsulation technique for controlled delivery of interferon alpha.     

Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels

This paper presents experimental and numerical investigations on multi-layered timber beams using welded-through wood dowels in place of traditional poly(vinyl acetate) (PVAc)-adhesives (or metallic nails). Four-layer beams were constructed with varying numbers of dowels, in each, and then loaded using four-points bending tests to evaluate the mechanical performance of these beams. The practical difficulties encountered in constructing deeper multi-layer beams are discussed and possible solutions which have been employed for the purpose of this work, and proved successful are presented. In order to investigate thoroughly the full potential of multi-layered beams with a very limited number of experimental studies, a 3D FE model has been presented, validated against experimental results and then used to study some influential parameters. The results showed that a reasonable bending stiffness of multi-layered beams is achievable with a good combination of material and geometric parameters.     

Fate of Escherichia coli O157:H7 and bacterial diversity in corn silage contaminated with the pathogen and treated with chemical or microbial additives

Inhibiting the growth of Escherichia coli O157:H7 (EC) in feeds may prevent the transmission or cycling of the pathogen on farms. The first objective of this study was to examine if addition of propionic acid or microbial inoculants would inhibit the growth of EC during ensiling, at silo opening, or after aerobic exposure. The second objective was to examine how additives affected the bacterial community composition in corn silage. Corn forage was harvested at approximately 35% dry matter, chopped to a theoretical length of cut of 10 mm, and ensiled after treatment with one of the following: (1) distilled water (control); (2) 1 × 10⁵ cfu/g of EC (ECCH); (3) EC and 1 × 10⁶ cfu/g of Lactobacillus plantarum (ECLP); (4) EC and 1 × 10⁶ cfu/g of Lactobacillus buchneri (ECLB); and (5) EC and 2.2 g/kg (fresh weight basis) of propionic acid, containing 99.5% of the acid (ECA). Each treatment was ensiled in quadruplicate in laboratory silos for 0, 3, 7, and 120 d and analyzed for EC, pH, and organic acids. Samples from d 0 and 120 were also analyzed for chemical composition. Furthermore, samples from d 120 were analyzed for ammonia N, yeasts and molds, lactic acid bacteria, bacterial community composition, and aerobic stability. The pH of silages from all treatments decreased below 4 within 3 d of ensiling. Escherichia coli O157:H7 counts were below the detection limit in all silages after 7 d of ensiling. Treatment with L. buchneri and propionic acid resulted in fewer yeasts and greater aerobic stability compared with control, ECCH, and ECLP silages. Compared with the control, the diversity analysis revealed a less diverse bacterial community in the ECLP silage and greater abundance of Lactobacillus in the ECLP and ECA silages. The ECLB silage also contained greater abundance of Acinetobacter and Weissella than other silages. Subsamples of silages were reinoculated with 5 × 10⁵ cfu/g of EC either immediately after silo opening or after 168 h of aerobic exposure, and EC were enumerated after 6 or 24 h, respectively. All silages reinoculated with EC immediately after silo opening (120 h) had similar low pH values (<4.0) and EC counts were below the detection limit. The ECCH and ECLP silages reinoculated with EC after 168 h of aerobic exposure had relatively high pH values (>5.0) and EC counts (5.39 and 5.30 log cfu/g, respectively) 24 h later. However, those treated with L. buchneri or propionic acid had lower pH values (4.24 or 3.96, respectively) and lower EC counts (1.32 log cfu/g or none, respectively). During ensiling, EC was eliminated from all silages at pH below 4.0. During aerobic exposure, the growth of EC was reduced or prevented in silages that had been treated with L. buchneri or propionic acid at ensiling, respectively.     

Direct Comparison between Five Different Microchannels,Part 2: Experimental Description and Flow Friction Measurement

Abstract

Part one of this paper ^[1] Eason, C., Dalton, T., O'Mathúna, C., Slattery, O. and Davies, M. 2005. Direct Comparison between Five Different Microchannels, Part 1: Channel Manufacture and Measurement. Heat Transfer Engineering Journal, vol. 26(no. 3): pp. 00–00.  [Google Scholar] investigates the manufacture of five types of microchannels produced by wet and dry etching in silicon and precision mechanical sawing in silicon and thermoset plastic. This paper describes the experimental equipment and methods used to measure the pressure flow characteristics of the manufactured channels. A test system has been built to test each sample using the same inlet and outlet manifolds, pressure tappings, pumping system, and instrumentation. The measured pressure flow behavior was compared with theoretical values calculated from macroscale theory. Error analysis was carried out in order to determine the overall accuracy of the experimental work and determine the significance of any experimental deviation from theoretical values. An area compensation term is introduced to account for the difference in cross-section between the measured actual channels and the rectangles/trapeziums that share their overall dimensions.     

Identification of trinucleotide repeat ligands with a FRET melting assay

DNA hairpin structures formed within a repeated tract might be a causative factor for triplet expansion observed in several debilitating diseases. We have designed and used a fluorescence resonance energy transfer (FRET) melting assay to screen for ligands that bind specifically to the CNG triplet repeats. Using this assay, we screened a panel of 33 chemicals that were previously designed to bind DNA or RNA secondary structures. Remarkably, we found that macrocyclic compounds, such as acridine dimers and trimers, exhibit interesting affinities and specificities for this motif.     

Laser damage resistance of hafnia thin films deposited by electron beam deposition, reactive low voltage ion plating, and dual ion beam sputtering

A comparative study is made of the laser damage resistance of hafnia coatings deposited on fused silica substrates with different technologies: electron beam deposition (from Hf or HfO(2) starting material), reactive low voltage ion plating, and dual ion beam sputtering. The laser damage thresholds of these coatings are determined at 1064 and 355 nm using a nanosecond pulsed YAG laser and a one-on-one test procedure. The results are associated with a complete characterization of the samples: refractive index n measured by spectrophotometry, extinction coefficient k measured by photothermal deflection, and roughness measured by atomic force microscopy.     

Effects of ground,steam-flaked,and super-conditioned corn grain on production performance and total-tract digestibility in dairy cows

This study aimed to evaluate the effects of feeding ground, steam-flaked, or super-conditioned corn on production performance, rumen fermentation, nutrient digestibility, and milk fatty acid (FA) profile of lactating dairy cows. Twenty-four lactating Holstein cows (130 ± 12 d in milk) in a completely randomized block design experiment were assigned to 1 of 3 treatments that contained 31% of one of the following corn types: (1) ground corn; (2) steam-flaked corn; and (3) super-conditioned corn. Actual milk yield was greater in the super-conditioned corn diet than in the steam-flaked and ground corn diets. Dry matter intake, 3.5% fat-corrected milk and energy-corrected milk remained unaffected by treatments; however, milk fat concentration decreased in the super-conditioned corn diet compared with the ground and steam-flaked corn diets. The molar proportion of ruminal acetate decreased in the super-conditioned corn diet compared with the ground and steam-flaked corn diets, whereas the molar proportion of propionate spiked in the super-conditioned corn diet. Ruminal pH dropped in cows fed super-conditioned corn compared with the other 2 diets. A similar pattern was observed for ruminal NH₃-N and acetate-to-propionate ratio. Total-tract starch digestibility increased the most in the super-conditioned corn diet followed by the steam-flaked and ground corn diets (96.8, 95.1, and 92.5%, respectively). The neutral detergent fiber digestibility declined in cows fed the super-conditioned corn diet as opposed to other diets (~3.9%). The concentrations of 16:0 and mixed-FA in milk fat dropped in the super-conditioned corn-based diet compared with the ground corn diet. Milk trans-10 18:1 FA increased, whereas trans-11 18:1 FA decreased in cows fed the super-conditioned diet. We concluded that super-conditioned corn has the potential to increase milk yield and starch digestibility in lactating dairy cows; however, reduced milk fat output caused by altering ruminal pH and ruminal FA biohydrogenation pathways may not be desirable in certain markets. Future research is warranted to investigate how super-conditioned corn affects feed efficiency.     

Proximate Composition and Fatty Acid Profile of <Emphasis Type="Italic">Pongamia pinnata</Emphasis>, a Potential Biodiesel Crop

The chemical characteristics of Pongamia pinnata seeds, focussing on proximate composition and the fatty acid profile of its oil, are presented. The proximate composition of P. pinnata seeds was: 3.8% ash, 9.7% sugar, 7.07% protein, 24% oil, 10.7% free amino acids, and 0.24% free fatty acids. The oil was extracted from seeds by use of different solvents and the highest yield (29%) was obtained by use of n-hexane. Monounsaturated and polyunsaturated fatty acids accounted for 63.3 and 22.9%, respectively, of the seed oil. Oleic acid was the major fatty acid but a substantial amount of erucic acid was also detected; this was not reported in previous studies. The level of erucic acid and the presence of toxic flavonoids, for example karanjin, pongapin, and pongaglabrin, render the oil inedible according to WHO recommendations. However, low levels of saturated and polyunsaturated fatty acids with desirable cetane number and iodine value suggest potential for application as a biodiesel fuel.     

In situ growth of multilayered crystals in amorphous matrix: Thermal,dynamic mechanical,and morphological analysis of nylon‐6/epoxy composites

A new procedure for processing of epoxy/polyamide blend was explored via solution polymerization of ε‐caprolactam in N‐methylpyrollidone (NMP), which resulted in a suspension of nylon‐6 in solvent at room temperature. The suspension was blended with water based epoxy resin using mechanical stirring at room temperature. Several films were prepared from blend by varying the amount of nylon‐6 without curing agent. All films were fully characterized for thermal and dynamic mechanical properties using differential scanning calorimetry and dynamic mechanical analysis. The addition of nylon‐6 had a plasticizing effect on epoxy evident by decrease in glass transition temperature (T_g). The reaction between nylon‐6 and epoxy was studied using Fourier transform infrared spectroscopy by following the characteristic epoxy peak (914 cm^?1). The growth of nylon‐6 crystals in epoxy matrix lead to spherulitic multiphase morphology, which was observed under scanning electron microscope. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3319–3327, 2013