Aerosol lidar intercomparison in the framework of the EARLINET project. 1. Instruments

In the framework of the European Aerosol Research Lidar Network to Establish an Aerosol Climatology (EARLINET), 19 aerosol lidar systems from 11 European countries were compared. Aerosol extinction or backscatter coefficient profiles were measured by at least two systems for each comparison. Aerosol extinction coefficients were derived from Raman lidar measurements in the UV (351 or 355 nm), and aerosol backscatter profiles were calculated from pure elastic backscatter measurements at 351 or 355, 532, or 1064 nm. The results were compared for height ranges with high and low aerosol content. Some systems were additionally compared with sunphotometers and starphotometers. Predefined maximum deviations were used for quality control of the results. Lidar systems with results outside those limits could not meet the quality assurance criterion. The algorithms for deriving aerosol backscatter profiles from elastic lidar measurements were tested separately, and the results are described in Part 2 of this series of papers [Appl. Opt. 43, 977-989 (2004)]. In the end, all systems were quality assured, although some had to be modified to improve their performance. Typical deviations between aerosol backscatter profiles were 10% in the planetary boundary layer and 0.1 x 10(-6) m(-1) sr(-1) in the free troposphere.     

Chemical transformation of PVC by phase transfer catalysis

Summary Suspension type PVC was reacted with sodium phenoxide in presence of different quaternary ammonium halides in THF or THF/water mixtures. The competition elimination vs. substitution of chlorine atoms depends on the homogeneity of the system, i.e. the more homogeneous the reaction mixture the less substituted the polymer.Dedicated to the 60th anniversary of Prof. Otto Vogl     

TMPA 卫星降水数据的评估与校正

卫星遥感降水由于时空分辨率的优势在现代水文模拟中正起着越来越大的作用。本研究对黄河源区的两套卫星降水产品(TMPA准实时3B42RT和研究数据3B42V6)进行了详细评估,结果表明,3B42RT与3B42V6相比会明显高估地面降水,而两者对降水事件的反演能力基本一致。通过引入"降水重心"的概念,两套卫星降水产品均可以基本反映降水的空间分布及长期演变过程。在两者尤其是3B42RT数据的校正中,首先将卫星数据与地面站点月降水对比,再等比例降尺度回日降水,然后尝试逐步订正和最优插值两种残差处理方法,从而使降水量和降水分布的精度进一步提高。最后用校正后的卫星降水驱动分布式水文模型,利用输出径流间接验证校正的效果。     

Building linked ontologies with high precision using subclass mapping discovery

The creation of links between schemas of published datasets is a key part of the Linked Open Data (LOD) paradigm. The ability to discover these links “on the go” requires that ontology matching techniques achieve good precision and recall within acceptable execution times. In this paper, we add similarity-based and mediator-based ontology matching methods to the Agreementmaker ontology matching system, which aim to efficiently discover high precision subclass mappings between LOD ontologies. Similarity-based matching methods discover subclass mappings by extrapolating them from a set of high quality equivalence mappings and from the interpretation of compound concept names. Mediator-based matching methods discover subclass mappings by comparing polysemic lexical annotations of ontology concepts and by considering external web ontologies. Experiments show that when compared with a leading LOD approach, Agreementmaker achieves considerably higher precision and F-measure, at the cost of a slight decrease in recall.     

Deblurring by Matching

Restoration of the photographs damaged by the camera shake is a challenging task that manifested increasing attention in the recent period. Despite of the important progress of the blind deconvolution techniques, due to the ill-posed nature of the problem, the finest details of the kernel blur cannot be recovered entirely. Moreover, the additional constraints and prior assumptions make these approaches to be relative limited.
In this paper we introduce a novel technique that removes the undesired blur artifacts from photographs taken by hand-held digital cameras. Our approach is based on the observation that in general several consecutive photographs taken by the users share image regions that project the same scene content. Therefore, we took advantage of additional sharp photographs of the same scene. Based on several invariant local feature points, filtered from the given blurred/non-blurred images, our approach matches the keypoints and estimates the blur kernel using additional statistical constraints.
We also present a simple deconvolution technique that preserves edges while minimizing the ringing artifacts in the restored latent image. The experimental results prove that our technique is able to infer accurately the blur kernel while reducing significantly the artifacts of the spoilt images.     

Spectral depth profiling of arbitrary surfaces by thermal emission decay-Fourier transform infrared spectroscopy

We report a new spectroscopic technique that combines step-scanning Fourier transform infrared spectroscopy with opto-thermal transient emission radiometry (OTTER) in order to provide near-surface depth-resolved spectra in the range 700-1800 cm(-1). It works nondestructively, without contact, with samples of arbitrary shape and size, without requiring prior preparation. The depth of surface probed depends on the thermal diffusivity of the sample; for organic materials it is approximately 10 microm. With homogeneous samples, absolute absorption coefficients can be measured. With two-layered samples, the technique proved able to distinguish between the spectral properties of the top layer and the substrate and to estimate the thickness of the top layer. We present a theoretical analysis with the main design features of the instrumentation and software, together with studies of homogeneous and layered samples, to validate the methods and illustrate the potential of the technique for practical applications.     

l-Lactic acid biosensor based on multi-layered graphene

Pristine graphene platelets and graphene oxide were used as electrode modifiers, aiming the investigation of their electrochemical efficacy towards β-nicotinamide adenine dinucleotide (NADH). The electrochemical detection of NADH is one of the most studied areas of bioelectroanalysis because of the ubiquity of NAD(P)H-based enzymatic reactions in nature. Commercially available graphene and laboratory prepared graphene oxide were used to modify glassy carbon electrodes and the behaviour of such modified electrodes against potassium ferricyanide (III) and NADH was reported. Relying on the graphene-modified transducer, l-lactic dehydrogenase (l-LDH) was successfully immobilised in a 1 % Nafion^® membrane. The developed biosensor, working at +250 mV versus Ag/AgCl reference electrode, was used to assess l-lactic acid in four different types of yogurts, revealing an l-lactic acid concentration ranging between 0.3 and 0.6 %.     

Chemomechanical Systems: Study of Contraction and Mechanical Work of Poly(Acrylonitrile) Gel Fibers

Poly(acrylonim1e) fibers were preoxidated under stress, in the presence of air, then saponified by boiling in alkaline solutions. The chemomechani-cal behavior of these fibers, expressed as contraction and mechanical work, under different loads and in different solvent-nonsolvent and/or base-acid systems were investigated. Total nitrogen content, carboxyl groups content, tensile strength, and cross-link density were determined. Both contraction and mechanical work were expressed as functions of applied load in every studied system. The results of chemomechanical measurements were connected to those of chemical and physical investigations. Significant differences in chemomechanical behavior were found to be the result of different stress conditions during the preoxidation stage.