The effects of soaking of whole, dehulled and ground millet and soybean seeds on phytate degradation and Phy/Fe and Phy/Zn molar ratios

The degradation and leaching of phytates, phytase activity and iron and zinc concentrations have been studied after soaking of whole seeds, dehulled seeds and flours of millet and soybean, in order to investigate the efficiency of soaking on reducing Phy/Fe and Phy/Zn molar ratios. When using millet grains, dehulling and milling before soaking facilitated the leaching of phytates and phytases in the aqueous medium and hence phytate degradation. Dehulling of soybean seeds led to a marked increase in phytate content, whereas milling favoured reactions between phytases and phytates. The Phy/Fe and Phy/Zn molar ratios decreased only slightly during soaking. The highest decreases for millet were obtained after soaking of flour for 8 h (Phy/Fe: 10.8–7.7 and Phy/Zn: 20.3–15.1), and after soaking of whole seeds for 24 h for soybean (Phy/Fe: 10.4–9.4 and Phy/Zn: 23.8–19.1). Cooking of flours with water used for soaking did not increase phytate degradation.     

Factors influencing the national distribution of polycyclic aromatic hydrocarbons and polychlorinated biphenyls in British soils

The polycyclic aromatic hydrocarbons (PAHs) naphthalene, acenaphthylene, acenaphthene, fluorene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, ideno[1,2,3,-cd]-pyrene, dibenz[a,h]anthracene, benzo[g,h,i]perylene and the polychlorinated biphenyls (PCBs) 8, 18, 28, 29, 31, 52, 77, 101, 105, 114, 118, 123, 126, 128, 138, 141, 149, 153, 156, 157, 163, 169, 170, 171, 180, 183, 187, 189, 194, 199, 201, 206, and 209 were measured in -200 rural soils across Great Britain (GB). Dominance of soil PAH profiles by heavier compounds (4-6 rings) provided initial evidence for the importance of source in governing soil PAH concentrations. No relationship was found between soil organic matter (SOM) and sum concentration of total and "heavy" PAHs, although there was a weak positive relationship with lighter compounds. A spatial statistical technique showed that highest soil PAH concentrations were usually found close to industrial/urban centers where presumably source intensity is highest. PCBs clustered into seven groups, five of which contained a single "dioxin like" PCB, one contained lighter congeners (2-4 chlorines), and one contained heavy congeners (5-10 chlorines). Linear regressions with SOM explained up to 24.3% of variation for the sum concentration of penta- to deca- congeners, but <1% for the lighter congener groups. No significant relationships were found with latitude. Spatial statistical techniques showed clusters of high soil PCB concentrations predominantly in west and south east GB, either associated with urbanized areas or on the West coast.     

Lipid Oxidation in Oil‐in‐Water Emulsions: Involvement of the Interfacial Layer

More polyunsaturated fats in processed foods and fewer additives are a huge demand of public health agencies and consumers. Consequently, although foods have an enhanced tendency to oxidize, the usage of antioxidants, especially synthetic antioxidants, is restrained. An alternate solution is to better control the localization of reactants inside the food matrix to limit oxidation. This review establishes the state‐of‐the‐art on lipid oxidation in oil‐in‐water (O/W) emulsions, with an emphasis on the role of the interfacial region, a critical area in the system in that respect. We first provide a summary on the essential basic knowledge regarding (i) the structure of O/W emulsions and interfaces and (ii) the general mechanisms of lipid oxidation. Then, we discuss the factors involved in the development of lipid oxidation in O/W emulsions with a special focus on the role played by the interfacial region. The multiple effects that can be attributed to emulsifiers according to their chemical structure and their location, and the interrelationships between the parameters that define the physicochemistry and structure of emulsions are highlighted. This work sheds new light on the interpretation of reported results that are sometimes ambiguous or contradictory.     

Long-Term Measures of Dyslipidemia,Inflammation, and Oxidative Stress in Rats Fed a High-Fat/High-Fructose Diet

Inflammation and oxidative stress are thought to be involved in, or associated with, the development of obesity, dyslipidemia, hepatic steatosis, and insulin resistance. This work was designed to determine the evolution of inflammation and oxidative stress during onset and progression of hepatic steatosis and glucose intolerance. Seventy-five male Wistar rats were divided to control and high-fat high-fructose (HFHFr) groups. A subgroup of each group was sacrificed at 4, 8, 12, 16, and 20 weeks. HFHFr-fed rats exhibited overweight, glucose intolerance, and hepatic steatosis with increased contents of hepatic diacylglycerols and ceramides. The HFHFr diet increased hepatic interleukin 6 (IL-6) protein and adipose tissue CCL5 gene expression and hepatic nicotinamide adenine dinucleotide phosphate (NADPH) oxidase activity but not mitochondrial reactive oxygen species (ROS) production. The HFHFr diet decreased plasma and liver levels of isoprostanoid metabolites as well as plasma thiobarbituric acid-reactive substance (TBARS) levels. Hepatic glutathione content was decreased with a moderate decrease in superoxide dismutase (SOD) and glutathione peroxidase (GPx) with the HFHFr diet. Overall, HFHFr diet led to hepatic lipid accumulation and glucose intolerance, which were accompanied by only moderate inflammation and oxidative stress. Most of these changes occurred at the same time and as early as 8 or 12 weeks of diet treatment. This implies that oxidative stress may be the result, not the cause, of these metabolic alterations, and suggests that marked hepatic oxidative stress should probably occur at the end of the steatotic stage to result in frank insulin resistance and steatohepatitis. These findings need to be further evaluated in other animal species as well as in human studies.     

Electroless ultrasonic functionalization of diamond nanoparticles using aryl diazonium salts

We report a novel and very handful strategy for the functionalization of diamond nanoparticles (NDs), based on the ultrasound-assisted grafting of aryl groups from the electroless reduction of diazonium salts. For this study, 4-nitrobenzenediazonium salt was used as a model molecule and the reaction was investigated in neutral and acidic aqueous media. Spectroscopic evidence for the successful attachment of aryl groups to nanodiamonds (NDs) was given by IR and XPS which clearly detect characteristic NO₂ peaks. Moreover, the absence of any peaks from the ⁺N≡N group in the IR spectra is a clear indication of the chemical reduction of the parent diazonium salt at the surface of NDs. This spontaneous chemical modification of NDs by aryl diazonium salts was confined to the surface of the ND particles; indeed, XRD measurements have shown that the crystalline structure of the bulk of the particles was unaffected. It opens up new possibilities towards the control of the surface chemical composition of NDs using simple protocols operated in very soft conditions, i.e. in water at room temperature. It shows conclusively that the chemistry toolbox of experts interested in nanodiamonds should contain aryl diazonium salts, given their versatility in forming active platforms.     

A Strategic Approach to Conservation Planning for Coastal New Zealand Landscapes

In New Zealand's lowland production landscapes less than 5% of the land comprises native vegetation. The continuing loss of lowland habitats remains, as the New Zealand Biodiversity Strategy (2000) recognized, one of the most intractable of New Zealand's conservation problems. The reasons behind this loss are explored and possible approaches to arresting this decline are considered. Field research was undertaken in two coastal plains landscapes. The purpose of the research was to examine the extent and character of native habitats remaining on the plains. A database comprising data on 744 sites with predominantly native habitats was created. The majority of these sites were not included on existing conservation databases and as such fall outside the remit of existing conservation planning and management processes. The study indicates that if the decline of native habitats on the plains is to be halted and reversed, a new approach to conservation planning is needed. A strategic planning approach to conservation is required, based on ecological regions where the focus is on co-ordinated planning of natural areas at the landscape scale.     

The Efficacy of Fibrinogen Concentrates in Relation to Cryoprecipitate in Restoring Clot Integrity and Stability against Lysis

Loss of fibrinogen is a feature of trauma-induced coagulopathy (TIC), and restoring this clotting factor is protective against hemorrhages. We compared the efficacy of cryoprecipitate, and of the fibrinogen concentrates RiaSTAP^® and FibCLOT^® in restoring the clot integrity in models of TIC. Cryoprecipitate and FibCLOT^® produced clots with higher maximal absorbance and enhanced resistance to lysis relative to RiaSTAP^®. The fibrin structure of clots, comprising cryoprecipitate and FibCLOT^®, mirrored those of normal plasma, whereas those with RiaSTAP^® showed stunted fibers and reduced porosity. The hemodilution of whole blood reduced the maximum clot firmness (MCF) as assessed by thromboelastography. MCF could be restored with the inclusion of 1 mg/mL of fibrinogen, but only FibCLOT^® was effective at stabilizing against lysis. The overall clot strength, measured using the Quantra^® hemostasis analyzer, was restored with both fibrinogen concentrates but not cryoprecipitate. α₂antiplasmin and plasminogen activator inhibitor-1 (PAI-1) were constituents of cryoprecipitate but were negligible in RiaSTAP^® and FibCLOT^®. Interestingly, cryoprecipitate and FibCLOT^® contained significantly higher factor XIII (FXIII) levels, approximately three-fold higher than RiaSTAP^®. Our data show that 1 mg/mL fibrinogen, a clinically achievable concentration, can restore adequate clot integrity. However, FibCLOT^®, which contained more FXIII, was superior in normalizing the clot structure and in stabilizing hemodiluted clots against mechanical and fibrinolytic degradation.     

Decarboxylative Heterocoupling Coupling of Substituted Benzoic Acids for Biaryl Synthesis

The heterocoupling between 2-nitrobenzoic and 2,6-dimethoxybenzoic acids was studied. It was demonstrated that the [PdCl₂/Cu(OH)₂:0.2/0.75 equiv.] catalytic system can catalyze this reaction with significant yield. Further optimizations (i.e.: sources and loadings of copper and palladium salts, base) allowed to isolate the biaryl in 70 % yield. A catalytic cycle that accounts for the observed results is proposed. While the bi-metal catalyst has shown high yields with some substrates, it is only able to catalyze the decarboxylative coupling in high yield for some of the substrates studied.     

Optimal movement in the prey strikes of weakly electric fish: a case study of the interplay of body plan and movement capability

Animal behaviour arises through a complex mixture of biomechanical, neuronal, sensory and control constraints. By focusing on a simple, stereotyped movement, the prey capture strike of a weakly electric fish, we show that the trajectory of a strike is one which minimizes effort. Specifically, we model the fish as a rigid ellipsoid moving through a fluid with no viscosity, governed by Kirchhoff's equations. This formulation allows us to exploit methods of discrete mechanics and optimal control to compute idealized fish trajectories that minimize a cost function. We compare these with the measured prey capture strikes of weakly electric fish from a previous study. The fish has certain movement limitations that are not incorporated in the mathematical model, such as not being able to move sideways. Nonetheless, we show quantitatively that the computed least-cost trajectories are remarkably similar to the measured trajectories. Since, in this simplified model, the basic geometry of the idealized fish determines the favourable modes of movement, this suggests a high degree of influence between body shape and movement capability. Simplified minimal models and optimization methods can give significant insight into how body morphology and movement capability are closely attuned in fish locomotion.