Ionic liquid as surfactant in microwave‐assisted emulsion polymerization

The aim of this work is to study the use of an ionic liquid (IL) as surfactant in emulsion polymerization reactions and to evaluate its effect when these reactions are heated under microwave irradiation. The IL 1‐n‐dodecyl‐3‐methylimidazolium chloride was chosen to replace the surfactant dodecyltrimethylammonium bromide (DTAB) in methyl methacrylate emulsion polymerizations. The conversion evolutions and the final average diameter of polymeric particles were quite similar for reactions using the surfactant DTAB or the IL, showing that the IL acted efficiently as surfactant in emulsion polymerizations. Comparing the polymerization reactions performed under microwave irradiation and conventional heating, reaction rate enhancements were obtained for both DTAB and IL. Using a pulsed scheme, under high‐power microwave irradiation, slightly higher reaction rates and molecular weights were obtained in reactions using IL, in comparison with surfactant DTAB, indicating the existence of some specific effects linked to IL–microwaves interaction. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Amaranth Oil Increased Fecal Excretion of Bile Acid but Had No Effect in Reducing Plasma Cholesterol in Hamsters

Hamsters were fed for 4 weeks on four different diets: control (C) (balanced diet containing 20 % corn oil as the lipid source), hypercholesterolemic (H) (identical to C but containing 12 % coconut oil, 8 % corn oil and 0.1 % cholesterol as the lipid source), amaranth oil (A) (identical to H without corn oil but with amaranth oil), and squalene (S) (identical to H but admixed with squalene in the ratio found in amaranth oil). There were no significant differences in lipid profile, and in the cholesterol excreted in the animals’ feces from amaranth oil (A) and squalene (S) groups. Fecal excretion of bile acids was greater in the amaranth oil (A) and squalene groups (S) as compared to the other groups. The scores of steatosis and parenchymal inflammation observed in the amaranth oil (A) and squalene groups (S) were superior to the ones observed in the other groups. Our findings demonstrated that amaranth oil, and its component squalene, increased the excretion of bile acids but did not have a hypocholesterolemic effect in hamsters fed on a diet containing high amounts of saturated fat and cholesterol.     

<Superscript>29</Superscript>Si NMR Chemical Shift Tensor and Electronic Structure of 7-Silanorbornadienes

The structure and bonding of 7-silanorbornadienes was investigated using X-ray Diffraction (XRD), solid-state NMR spectroscopy and density functional calculations. The solid state structures of four benzo-7-silanorbornadienes (4a, c, d, e) and of one dibenzo-7-silabenzonorbornadiene (5a) are reported and compared with the results of previous structural investigations. The most prominent features of the molecular structures of all 7-silanorbornadienes are very long Si-C(bridgehead) bonds (d(SiC) = 190.6–196.8 pm) and very acute CSiC bond angles α (α(CSiC) = 78.7–83.9°). All newly investigated 7-silanorborndienes show for tetracoordinated silicon nuclei extremely deshielded ²⁹Si NMR resonances (δ²⁹Si = 65.6–31.6). Solid State NMR investigations for 7-silanorbornadienes anti-4a, b reveal highly anisotropic chemical shift tensors of axial or nearly axial symmetry (4a: δ₁₁ = 161, δ₂₂ = δ₃₃ = −11; 4b: δ₁₁ = 113, δ₂₂ = 14, δ₃₃ = −15). The dominating, strongly deshielding δ₁₁ component is oriented almost perpendicular to the plane spanned by the two bridgehead carbon atoms and the bridging silicon atom. The DFT calculations suggest that the origin of the strong deshielding is a small energy difference between the frontier orbitals, which are strongly localized at the silicon atom. In addition the computations reveal that both the long SiC bonds and the strongly deshielded ²⁹Si NMR chemical shift are direct consequences of the bonding situation in 7-silanorbornadienes which are characterized by through space interaction of the C=C double bonds and by hyperconjugation between the SiC σ-bonds and the unoccupied orbitals of the C=C double bonds.     

Enabling Efficient Peer-to-Peer Resource Sharing in Wireless Mesh Networks

Wireless mesh networks are a promising area for the deployment of new wireless communication and networking technologies. In this paper, we address the problem of enabling effective peer-to-peer resource sharing in this type of networks. Starting from the well-known Chord protocol for resource sharing in wired networks, we propose a specialization that accounts for peculiar features of wireless mesh networks: namely, the availability of a wireless infrastructure, and the 1-hop broadcast nature of wireless communication, which bring to the notions of location awareness and MAC layer cross-layering. Through extensive packet-level simulations, we investigate the separate effects of location awareness and MAC layer cross-layering, and of their combination, on the performance of the P2P application. The combined protocol, MeshChord, reduces message overhead of as much as 40 percent with respect to the basic Chord design, while at the same time improving the information retrieval performance. Notably, differently from the basic Chord design, our proposed MeshChord specialization displays information retrieval performance resilient to the presence of both CBR and TCP background traffic. Overall, the results of our study suggest that MeshChord can be successfully utilized for implementing file/resource sharing applications in wireless mesh networks.     

Distribution of aerobic motile and non-motile bacteria within the capillary fringe of silica sand

Retention of bacterial cells as “particles” by silica sand during formation of a capillary fringe (CF) and the influence of motility was examined with motile Pseudomonas putida and non-motile Corynebacterium glutamicum suspensions in the absence of nutrients. The fractional retention of C. glutamicum cells at all regions of the CF was higher than for P. putida cells, most probably due to the motility of P. putida. Only about 5% of P. putida cells and almost no C. glutamicum cells reached the upper end of a CF of 10 cm height.With cell suspensions of P. putida and C. glutamicum in nutrient broth the development of a CF in silica sand fractions of 355-710 μm and 710-1000 μm respectively, was finished after about 6 h. Growth of cells proceeded for about 6 days. P. putida formed a biofilm on silica grains, whereas no attachment of C. glutamicum on silica sand occurred. Relative cell densities of C. glutamicum on the bottom and in the upper regions of the CF were always lower than those of P. putida and were also lower than those reached in suspended cultures with the same medium. In coarse sand the motile P. putida cells reached significantly higher cell densities in upper CF regions than in fine sand. Growth of C. glutamicum in the CF apparently was slower and a higher proportion of the energy was required for maintenance. Whereas cell densities of P. putida, in CFs of both sand fractions, varied less than one order of magnitude, those of C. glutamicum varied in a wider range from the basis to the top of the CF.Analyses of the esterase activity of P. putida and C. glutamicum with fluorescein diacetate (FDA) revealed that the cells in higher CF regions were significantly more active than those at the bottom of the CF. Furthermore, a significant correlation (r = 0.66, p < 0.01) between cells ml⁻¹ and the FDA conversion to fluorescein was found.     

Nonisothermal Crystallization Kinetics of an Ethylene‐Vinyl‐Acetate: I Calorimetry Versus Rheology

The knowledge of the thermo‐mechanical response of polymers during crystallization is of seminal importance for process control and modeling. Among the other subtle findings, the crystallinity‐rheological simplicity, resembling the thermo‐rheological one, was frequently reported, based on the observation that the same amount of crystallinity induces the same rheological hardening to the polymer, regardless the crystallization conditions. The crystallization kinetics, which is a fundamental issue in polymer science, is investigated with differential scanning calorimetry (DSC) measurements. However, the poor agreement of calorimetric data with data coming from rheological investigation remains a debated issue. The crystallization kinetics of a commercial poly‐ethylene‐vinyl‐acetate copolymer (EVA) is here investigated both with DSC and rheological measurements. EVA is a nice model system since its melting point is below 100°C, thus allowing avoiding all the experimental shortcomings related to thermal degradation. We show that DSC and rheological crystallization data satisfactorily agree for the investigated copolymer and thus we conclude that all the discrepancies found in the literature must be principally due to experimental artifacts. Moreover, the observed agreement between DSC and rheological data confirms that the rheological hardening is proportional to the volume of crystallites only and not to the modality in which the crystallization takes place. POLYM. ENG. SCI., 59:2557–2563, 2019. © 2019 Society of Plastics Engineers     

Biofilm photobioreactors for the treatment of industrial wastewaters

A flat plate and a tubular packed-bed photobioreactor with an algal-bacterial biofilm attached onto Poraver beads carriers, a flat plate and a tubular photobioreactor with the biofilm attached onto the reactor walls, and an algal-turf reactor were compared in terms of BOD removal efficiencies, elimination capacities, and stability. A control column photobioreactor with suspended algal-bacterial biomass was also tested to compare the performance of biofilm photobioreactors with conventional algal-based processes. When the algal-bacterial biomass was immobilized onto Poraver the process never reached a steady state due to a poor homogenization in the bioreactor. When the biofilm was formed onto the reactor wall (or reactor base) the process was stable. A maximum degradation rate of 295mg BODl(-1)h(-1) was achieved in the algal-turf reactor although control experiments performed in the dark showed atmospheric O2 diffusion represented 55% of the oxygenation capacity in this system. BOD removal rates of 108, and 92mg BODl(-1)h(-1) were achieved in the tubular and flat plate biofilm reactors, respectively, compared to 77mg BODl(-1)h(-1) in the control suspended bioreactor. In addition, all biofilm photobioreactors produced an easily settleable biomass. Evidence was found that biomass attachment to the reactor's wall improved stability.     

The role of teat skin contamination in the epidemiology of Staphylococcus aureus intramammary infections

Knowledge of the epidemiological pattern and the potential sources of infections is important to control Staphylococcus aureus in dairy herds. This paper reports the results of a study applying both pulse field gel electrophoresis (PGFE) and the assessment of a selected number of virulence genes to investigate the role of teat skin on Staph. aureus transmission among cows and on the contamination of milk. Overall 61 isolates were considered, 23 from teat skin, 33 from milk samples and 5 from curd samples. Teat swabs were taken in five herds, but in only three of them could Staph. aureus be isolated. Curd was sampled in three herds, but Staph. aureus could be isolated in only two herds. The distribution of isolates among herds confirmed the presence of herd-specific Staph. aureus strain in most of the herds. The same pattern was observed in teat skin samples, in quarter milk samples, and in the curd samples. Our findings are consistent with other studies showing the role of teat skin as a potential reservoir. Moreover, Staph. aureus was isolated from teat skin of confirmed Staph. aureus-negative cows that were segregated from infected ones. Our findings also suggest that some strains have higher chances to survive on teat skin and therefore to increase the risk for contamination of milk and milk products due to the persistence of intramammary infections.