Analysis of solution polybutadiene polymerizations performed with a neodymium catalyst

This article is regarding the polymerization of 1,3‐butadiene with a neodymium catalyst activated by diisobutylaluminum‐hydride and diethylaluminum chloride (DEAC). The effects of the polymerization conditions (ratio between DEAC and neodymium molar concentrations, polymerization temperature, catalyst concentration, and butadiene concentration) on the polymer yield and molecular weight distribution (MWD) of polybutadiene (PB) samples were evaluated. It is shown that the DEAC/Nd ratio and the polymerization temperature are the reaction variables that influence the MWD and the catalyst performance most significantly. PBs with broad and sometimes bimodal MWD were produced at the analyzed reaction conditions. For this reason, the MWD of the obtained polymer materials was deconvoluted with the help of the Flory most probable distribution, indicating that three or more catalyst sites are required to explain the final MWD of the polymer samples. Finally, it was observed that the analyzed neodymium catalyst is able to produce branched PBs at mild reaction conditions and that the branching frequency depends on the polymerization conditions, which may be useful for development of operation policies at plant site and production of materials with improved performances. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Measurement and numerical prediction of fiber‐reinforced thermoplastics' thermal conductivity in injection molded parts

Recent improvements in injection molding numerical simulation software have led to the possibility of computing fiber orientation in fiber reinforced materials during and at the end of the injection molding process. However, mechanical, thermal, and electrical properties of fiber reinforced materials are still largely measured experimentally. While theoretical models that consider fiber orientation for the prediction of those properties exist, estimating them numerically has not yet been practical. In the present study, two different models are used to estimate the thermal conductivity of fiber reinforced thermoplastics (FRT) using fiber orientation obtained by injection molding numerical simulation software. Experimental data were obtained by measuring fiber orientation in injection molded samples' micrographs by image processing methods. The results were then compared with the numerically obtained prediction and good agreement between numerical and experimental fiber orientation was found. Thermal conductivity for the same samples was computed by applying two different FRT thermal conductivity models using numerically obtained fiber orientation. In the case of thermal conductivity, predicted results were consistent with experimental data measurements, showing the validity of the models. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39811.     

Structural symmetry breaking of silicon‐containing poly(amide‐imide) oligomers and its relation to electrical conductivity and Raman‐active vibrations

Optically active poly(amide‐imide) oligomers were synthesized by direct polycondensation between an aromatic diamine and a dicarboxylic acid both containing a diphenylsilylene unit. The reaction was carried out using triphenyl phosphite/pyridine in the presence of CaCl₂ and N‐methyl‐2‐pyrrolidone as solvent. Oligomers were obtained in good yields and showed high solubility in common aprotic polar solvents. The precursors, monomers and poly(amide‐imide) oligomers were characterized using elemental analysis and Fourier transform infrared and NMR (¹H, ¹³C, ²⁹Si) spectroscopy. Additionally, the main vibrations of the functional groups (C?O, C?C or N? H) in the oligomers with respect to temperature were characterized using Raman spectroscopy. The glass transition temperature was determined by studying the Raman spectra and corroborated using differential scanning calorimetry. The thermal stability was studied using thermogravimetric analysis. The molecular mass of the compounds was obtained from matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry and their optical properties were analyzed using UV‐visible diode array spectrophotometry. The electronic properties of the oligomers as well as the delocalization of charge carriers within their structures were analyzed using conductance‐voltage curves, which showed that these materials are excellent candidates for integrated optoelectronic applications. Copyright © 2011 Society of Chemical Industry     

Thiophene‐ and silarylene‐containing polyesters. Resonance effect on conductivity after polarization in an external electric field

Polyesters were synthesized by direct polycondensation of thiophene‐2,5‐dicarboxylic acid and five different silarylene‐containing diphenols using a tosyl chloride/pyridine/N,N‐dimethylformamide system as a condensing agent. Polymers were obtained in good yields and were characterized using Fourier transform infrared and NMR (¹H, ¹³C, 135‐DEPT and ²⁹Si) spectroscopy and elemental analysis. All polymers were completely soluble in aprotic organic polar solvents such as dimethylformamide, dimethylsulfoxide and N‐methyl‐2‐pyrrolidone. The range of effective mass of the polymers (m/z) was 1 × 10⁵–2 × 10⁵, determined using electrospray ionization mass spectrometry. Asymmetry and steric hindrance prevented dense packing of the polymeric chains, showing glass transition temperatures between ? 78 and ? 51 °C and loss of thermal stability at 177–199 °C (10% weight loss). Additionally, the melting points of the polyesters were found to be in the range 62–67 °C. Because of this, the samples were semi‐solid at room temperature. The optical band gaps of the polymers were observed between 4.54 and 4.48 eV, corresponding in all cases to insulator behavior. The molecular structure of the samples was studied using X‐ray diffraction, showing a degree of order that was associated with two monoclinic lattices. Additionally, the conductivity was studied using a two‐point method with contacts on top of polymer films. Prior to the electrical measurement, the samples were polarized in an external electric field of 0.8 to 6.4 V cm^?1, and the alignment of the dipoles increased the electrical conductivity. Copyright © 2012 Society of Chemical Industry     

Too Low to Kill: Concentration of the Secondary Metabolite Ranunculin in Buttercup Pollen does not Affect Bee Larval Survival

Growing evidence suggests that the freely accessible pollen of some plants is chemically protected against pollen-feeding flower visitors. For example, a diet of pollen from buttercup plants (Ranunculus) recently was shown to have a deleterious effect on developing larvae of several bee species not specialized on Ranunculus. Numerous Ranunculus species contain ranunculin, the glucosyl hydrate form of the highly reactive and toxic lactone protoanemonin, that causes the toxicity of these plants. We tested whether the presence of ranunculin is responsible for the lethal effects of R. acris pollen on the larvae of two bee species that are not Ranunculus specialists. To investigate the effect on bee larval development, we added ranunculin to the pollen provisions of the Campanula specialist bee Chelostoma rapunculi and the Asteraceae specialist bee Heriades truncorum, and allowed the larvae to feed on these provisions. We quantified ranunculin in pollen of R. acris and in brood cell provisions collected by the Ranunculus specialist bee Chelostoma florisomne. We demonstrated that although ranunculin was lethal to both tested bee species in high concentrations, the concentration in the pollen of R. acris was at least fourfold lower than that tolerated by the larvae of C. rapunculi and H. truncorum in the feeding experiments. Ranunculin concentration in the brood cells of C. florisomne was on average even twentyfold lower than that in Ranunculus pollen, suggesting that a mechanism different from ranunculin intoxication accounts for the larval mortality reported for bees not specialized on Ranunculus pollen.     

Mesomorphic form of isotactic polypropylene in stereodefective polypropylene: Solid mesophase or liquid-crystal like structure

A study of the crystallization of the mesomorphic form of isotactic polypropylene (iPP) in samples of different stereoregularity prepared with metallocene catalysts is presented. Contrary to what claimed in the literature, we have found that the mesomorphic form can be obtained by quenching of the melt at 0 °C also in the case of low stereoregular samples, provided that the samples are kept at 0 °C for long time. The key is the formation of mesomorphic bundles with chains in ordered 3/1 helical conformation of size large enough to be stable and inhibit the crystallization of the α form at room temperature. For stereoirregular samples the concentration of long ordered helical stretches is low and this requires long residence time at 0 °C for the formation of mesomorphic aggregates of size larger than the critical size. This result provides evidence that the mesomorphic aggregates are not formed as a result of a cooperative process driven by entropy, as in the case of liquid crystals, but rather they form via a nucleation and growth mechanism, as in the normal crystallization processes, according to the idea that the mesophase of iPP is a highly defective crystalline form.     

Synthesis, biological activity, and ADME properties of novel S-DABOs/N-DABOs as HIV reverse transcriptase inhibitors

Previous studies aimed at exploring the SAR of C2-functionalized S-DABOs demonstrated that the substituent at this position plays a key role in the inhibition of both wild-type RT and drug-resistant enzymes, particularly the K103N mutant form. The introduction of a cyclopropyl group led us to the discovery of a potent inhibitor with picomolar activity against wild-type RT and nanomolar activity against many key mutant forms such as K103N. Despite its excellent antiviral profile, this compound suffers from a suboptimal ADME profile typical of many S-DABO analogues, but it could, however, represent a promising candidate as an anti-HIV microbicide. In the present work, a new series of S-DABO/N-DABO derivatives were synthesized to obtain additional SAR information on the C2-position and in particular to improve ADME properties while maintaining a good activity profile against HIV-1 RT. In vitro ADME properties (PAMPA permeation, water solubility, and metabolic stability) were also experimentally evaluated for the most interesting compounds to obtain a reliable indication of their plasma levels after oral administration.     

Revisiting the weighting function for lightness in the CIEDE2000 colour-difference formula

We have used 13 experimental datasets (7420 colour pairs) to study the performance of the weighting function for lightness proposed by the CIEDE2000 colour-difference formula, because it has been suggested that this function can be improved by using the weighting function for lightness S_L = 1 adopted by the CIE94 colour-difference formula. Using the standardised residual sum of squares (STRESS) index, it was found that: (i) replacing the S_L in CIEDE2000 with S_L = 1 improved the results for 7/13 datasets considered, but the improvement was statistically significant only for 1/13 datasets; (ii) a Whittle-type lightness-difference formula can be used to replace the term ∆L*/S_L in CIEDE2000, which led to a new colour-difference formula with no statistically significant difference with respect to CIEDE2000 for any of the 13 experimental datasets. A modification of the CIEDE2000 formula using a Whittle-type lightness formula is proposed.