An Integrated CAD Methodology for Yield Enhancement of VLSI CMOS Circuits Including Statistical Device Variations

In this paper a novel CAD methodology for yield enhancement of VLSI CMOS circuits including random device variations is presented. The methodology is based on a preliminary characterization of the technological process by means of specific test chips for accurate mismatch modeling. To this purpose, a very accurate position-dependent parameter mismatch model has been formulated and extracted. Finally a CAD tool implementing this model has been developed. The tool is fully integrated in an environment of existing commercial tools and it has been experimented in the STMicroelectronics Flash Memory CAD Group.As an example of application, a bandgap reference circuit has been considered and the results obtained from simulations have been compared with experimental data. Furthermore, the methodology has been applied to the read path of a complex Flash Memory produced by STMicroelectronics, consisting of about 16,000 MOSFETs. Measurements of electrical performances have confirmed the validity of the methodology, and the accuracy of both the mismatch model and the simulation flow.     

Structure of syndiotactic propylene-ethylene copolymers: Effect of the presence of ethylene units on the structural transitions during plastic deformation and annealing of syndiotactic polypropylene

Syndiotactic propylene-ethylene copolymers have been synthesized with a single-center C_s-symmetric syndiospecific metallocene catalyst. A study of the effect of the presence of ethylene comonomeric units on the polymorphic behavior of syndiotactic polypropylene (sPP) and on the structural transitions occurring during stretching is reported. For copolymer samples with low ethylene contents, in the range 2-7 mol%, crystals of the helical form I, present in the melt-crystallized samples, transform into the trans-planar form III by stretching at high deformation. Form III transforms in part into the helical form II by releasing the tension, as it occurs for sPP. Samples with ethylene contents in the range 8-10 mol% are crystallized from the melt as a mixture of crystals of helical form I and form II. Both helical forms transform by stretching at low values of deformation (lower than 300%) into the trans-planar mesomorphic form, which transforms into the trans-planar form III by further stretching at higher deformations (higher than 500%). For these samples form III transforms back into the mesomorphic form, rather than into the helical forms, by releasing the tension. Unoriented samples of copolymers with ethylene content in the range 13-18 mol% are mainly crystallized in the helical form II, which transforms into the trans-planar mesomorphic form by stretching. Upon releasing the tension the mesomorphic form remains stable and no polymorphic transition is observed. The presence of ethylene comonomeric units stabilizes the trans-planar forms in fibers of the copolymer samples. This has been confirmed by the result that for high ethylene contents the trans-planar form III and the mesomorphic form do not transform in helical forms by annealing of fibers stretched at high deformations.     

Normal forms for binary relations

We consider the representable equational theory of binary relations, in a language expressing composition, converse, and lattice operations. By working directly with a presentation of relation expressions as graphs we are able to define a notion of reduction which is confluent and strongly normalizing and induces a notion of computable normal form for terms. This notion of reduction thus leads to a computational interpretation of the representable theory.     

Contents of volume 49 (1991)

Contents of volume 49 (1991)     

Engineering a heavy atom derivative for the X-ray structure analysis of cyclodextrin glycosyltransferase

Based on a preliminary structural model of cyclodextrin glycosyltransferasefrom Bacillus circulans (EC 2.4.1.19 [EC] ), Ser428 and Ser475 ofthe enzyme were mutated to cysteines in order to produce suitableheavy atom derivatives. Mutant Ser475 - Cys could not be expressedas protein. Mutant Ser428 - Cys was expressed in Escherichiacoli and purified. It crystallized isomorphously and gave riseto a mercury derivative that improved the electron density map.The structural results show that the new mercury-binding siteis in a pocket at the protein surface.     

The Use of a Population Balance Model in the Study of Inoculation of Soybean Seeds in a Spouted Bed

The coating of soybean seeds with bacteria and micronutrients favours the vigorous growth of the plant, dispensing with the use of ammoniacal fertilizers. The optimum thickness of the coating should allow the fundamental gaseous interchanges for the germination and the ideal conditions for the activity of the bacteria. The objective of this work was to simulate dynamic mass distribution of soybean seeds covered with bacteria and macronutrients in spouted bed through a specific program developed in Maple V^®. The validation of the model is done through 16 experiments carried out in a spouted bed with spray at the top.     

Prototype calculations of B2 miscibility gaps in ternary b.c.c. systems with strong ordering tendencies

Prototype calculations in ternary ordering systems based on the b.c.c. lattice have been carried out with the Cluster Variation Method (CVM) in the irregular tetrahedron approximation including tetrahedron interactions. The systems under investigations were characterized by strong ordering tendencies (i.e. with large, negative first neighbour interactions in all binary sub-systems) which resulted in the opening of a miscibility gap inside the B2 single-phase field. This miscibility gap is shown to be produced by frustration of the B2 cluster by a calculation using a hypothetical system with identical first neighbour interactions in the three binary sub-systems. This phase diagram presents as a key feature a central three-phase miscibility gap, which transforms into an ordinary two-phase miscibility gap involving two B2 phases after the symmetry of the interactions is broken. The results are discussed in connection with the experimental Fe–Ti–Rh phase diagram.     

Membership function shape and the dynamic behaviour of fuzzy systems

In this paper the influence of the shape of the membership functions on the dynamic behaviour of a fuzzy controlled system is investigated. Although several works on fuzzy logic have been presented in the literature, few efforts have been made to characterize the dynamic behaviour of a fuzzy system through the shape of the membership functions. A parametrization for a class of membership functions is introduced in this work, resulting in a variety of shapes. Various system steady state dynamics are analysed as a consequence of this change in shape and chaotic dynamics is shown to arise for some membership function shapes.     

The \delta{}^{18}{\rm O} -value of the p-OH group of L-tyrosine permits the assignment of its origin to plant or animal sources

The biosynthesis of L-tyrosine in plants by the shikimate pathway via arogenate implies that the oxygen atom in the p-position originates from D-erythrose with a d¹⁸O \delta{}^{18}{\rm O} -value near +30‰ above leaf water, while its synthesis in animals by hydroxylation of external L-phenylalanine with O₂ as oxygen source and a kinetic isotope effect k₁₆/k₁₈ɏ.018 demands a d¹⁸O \delta{}^{18}{\rm O} -value near +6‰. These expectations are fully confirmed by experimental data from the ¹⁸O-pattern analysis of natural aromatic compounds. The result is considered as a basis for the assignment of L-tyrosine and L-tyrosine-derived material of plant or animal origin, respectively, and for the determination of the relative amounts of plant and animal material in food and animal feed.