Direct and Rapid High-Temperature Upcycling of Degraded Graphite

Recycling the degraded graphite is becoming increasingly important, which can helped conserve natural resources, reduce waste, and provide economic and environmental benefits. However, current regeneration methods usually suffer from the use of harmful chemicals, high energy and time consumption, and poor scalability. Herein, we report a continuously high-temperature heating (≈2000 K) process to directly and rapidly upcycle degraded graphite containing impurities. A sloped carbon heater is designed to provide the continuous heating source, which enables robust control over the temperature profile, eliminating thermal barrier for heat transfer compared to conventional furnace heating. The upcycling process can be completed within 0.1 s when the degraded graphite rolls down the sloped heater, allowing us to produce the upcycled graphite on a large scale. High-temperature heating removes impurities and enhances the graphitization degree and (002) interlayer spacing, making the upcycled graphite more suitable for lithium intercalation and deintercalation. The assembled upcycled graphite||Li cell displays a high reversible capacity of ≈320 mAh g⁻¹ at 1 C with a capacity retention of 96% after 500 cycles, comparable to current state-of-the-art recycled graphite. The method is a chemical-free, rapid, and scalable way to upcycle degraded graphite, and is adaptable to recycle other electrode materials.     

Evolution of soluble carbohydrates during the development of pea, faba bean and lupin seeds

Seeds of pea (Pisum sativum L. cv. Ergo), faba bean (Vicia faba ssp. minor Harz., cv. Tibo) and yellow pea lupin (Lupinus luteus L. cv. Juno) were sampled at different days after flowering (DAF) and their content of soluble carbohydrates was determined: Analysis of samples showed thatmyo-inositol, fructose, glucose, galactose and sucrose were found in high abundance early in development and their content decreased gradually during maturation. -Galactosides, which includes the content of raffinose, stachyose and verbascose, started to appear later in seed development, at 37 DAF in peas, 40 DAF in faba beans and 45 DAF in lupins. Their accumulation increased considerably during seed growth, and the maximum content was obtained in mature seeds; 3.8% in peas, 4.5% in faba beans and 10.4% in lupins. Results obtained for these sugars during seed development were fitted to modelling curves in order to predict sugar content at different development stages.     

An indexed atlas of digital mammograms for computer-aided diagnosis of breast cancer

Computer-aided diagnosis (cad) systems are being developed to assist radiologists in the interpretation of ambiguous mammographic features corresponding to possible signs of early breast cancer. Databases of digital mammograms are needed for testing such systems; we present an overview of a few such databases. Most databases are limited to single-exam sets of two or four mammograms on which the diagnosis was made, some ground-truth information related to the position of diagnostically significant mammographic features, and the diagnosis. We propose the design of a comprehensive, indexed atlas of digital mammograms. The design of an appropriate indexing scheme facilitates the implementation of content-based retrieval techniques needed for efficient access to and retrieval of relevant cases from the atlas. We also propose the use of mobile software agents for facilitating remote consultation of the atlas. Mobile agents can move between data sources such as the atlas and hospital repositories, perform computational tasks at each site, and return only relevant data to the user. These features reduce the computational requirements of the local computer system, bandwidth requirements, and overall network traffic. Proposed applications of the atlas include research, remote consultation, teaching, evaluation ofcad systems, and self-evaluation by radiologists.     

Monitoring for nitrate in UK-grown lettuce and spinach

To comply with European Commission requirements, the UK is carrying out a monitoring programme on nitrate concentrations in lettuce and spinach. This paper reports the results obtained between June 1996 and April 1998. A total of 182 samples of protected lettuce, 131 samples of outdoor-grown lettuce and 34 samples of fresh spinach were taken from the main growing areas of the UK. Nitrate concentrations in protected lettuce were influenced by the season with summer-grown crops (mean of 2382mg/kg) having lower levels than those grown in the winter (mean of 3124mg/kg). Weather conditions also affected concentrations in protected lettuces with long hours of sunshine and low rainfall associated with low nitrate levels. Nitrate concentrations in outdoor-grown lettuces were lower (mean of 1085mg/kg) than those in protected lettuces but there were insufficient data to determine if they were affected by the weather conditions or season. Similarly there were insufficient data to determine if weather conditions or season influenced nitrate concentrations in spinach (mean of 1900mg/kg) but regional differences were observed.     

Numerical Optimization of an Active Voltage Controller for High-Power IGBT Converters

Feedback control of insulated gate bipolar transistors (IGBTs) in the active region can be used to regulate the device switching trajectory. This facilitates series connection of devices without the use of external snubber networks. Control must be achieved across the full active region of the IGBT and must balance a number of conflicting system goals including diode recovery. To date, the choice of control parameters has been a largely empirical process. This paper uses accurate device models and formalized optimization procedures to evaluate IGBT active voltage controllers. A detailed optimization for the control of IGBT turn-on is presented in this paper     

Two-step parameter extraction procedure with formal optimization for physics-based circuit simulator IGBT and p-i-n diode models

A practical and accurate parameter extraction method is presented for the Fourier-based-solution physics-based insulated gate bipolar transistor (IGBT) and power diode models. The goal is to obtain a model accurate enough to allow switching loss prediction under a variety of operating conditions. In the first step of the extraction procedure, only one simple clamped inductive load test is needed for the extraction of the six parameters required for the diode model and of the 12 and 15 parameters required for the nonpunch-through (NPT) and punch-through (PT) IGBT models, respectively. The second part of the extraction procedure is an automated formal optimization step that refines the parameter estimation. Validation with experimental results from various structures of IGBT demonstrates the accuracy of the proposed IGBT and diode models and the robustness of the parameter extraction method.     

Effect of acid anion on the behavior of single component molecular resists incorporating ionic photoacid generators

A series of single component chemically amplified molecular resists were made using an onium salt cation core of tris(4-(tert-butoxycarbonyloxy)-3,5-dimethylphenyl)sulfonium (TAS) with five different acid anions: chloride (Cl), hexafluoroantimonate (SbF₆), triflate (Tf), nonaflate (Nf), and tosylate (Ts). The counter-ion had a large effect on both the performance and physical characteristics of the resists. TAS–SbF₆ and TAS–Tf imaged as positive tone resists with good LER, but suffered from acid diffusion problems which limited resolution. TAS–Ts and TAS–Cl had high water solubility that prevented their use as positive tone resists. TAS–Nf had poor wetting and adhesion that prevented it from being spin-coated into films. Using onium salts as single molecule resists places great restriction on the choice of anion used because of the large effect it has on the properties of the resist. Using extreme ultraviolet lithography, TAS–SbF₆, the best performing derivative, was able to resolve 50 nm 1:1 line/space patterns with LER (3σ) of 5.2 nm.     

On the theory of Δk radar observations of ocean surface waves

We consider the theory of waves scattered from a moving, rough, and dispersive surface in the small perturbation limit. The first-order scattered field for a time-dependent surface is obtained in the far zone of scattering in terms of the two-dimensional spectral amplitude of the surface and its dispersion relation. We develop a rigorous Δk radar theory and show that the nonzero output of a Δk radar occurs only when the Bragg condition for each signal component is satisfied separately. The frequency correlation function of the scattered field is then proportional to the mean value of the product of the spectral amplitudes of the surface at the corresponding Bragg wavenumbers. The mean value of this product is nonzero only for surfaces that have a locally varying spectrum and is proportional to the Fourier transform (with the argument Δk) of the variation of the local spectrum with respect to the pattern position. Such variations may be caused by either amplitude or phase modulation of the surface structure. In the former case, our results are similar to the results of existing theory. The latter case of phase modulation of the surface (for example, internal waves interacting with capillary waves) cannot be explained by previous theory