Studies of a thermomechanically treated Al-Zn-Mg alloy

The influence of subgrain structure on the precipitation process in an Al-4.2 wt% Zn-1.6 wt% Mg alloy was studied and correlated with its mechanical properties for ageing temperatures of 110, 142 and 165° C.     

On the connection between the exponential stability of C0-semigroups and the admissibility of a certain Sobolev space

Let T be a strongly continuous semigroup on a Banach space X and A its infinitesimal generator. We will prove that T is exponentially stable, if and only if, there exist p[1,∞) such that the space is admissible to the system Σ(A,I,I), defined below (i.e for all f belonging to the Sobolev space the convolution T*f lies in .     

Comparison of methods for determination of microbial biomass in wastewater

Microbial biomass in wastewater was determined by methods used in environmental microbiology and by a method used in wastewater engineering based on a conceptual model simulating fundamental microbial processes in wastewater from measured oxygen uptake rates. The methods originating from environmental microbiology are based on staining and counting of cells for the determination of total cell biomass (acridine orange and DAPI), physiological state of cells (LIVE/DEAD BacLight) and activity of cells (reduction of the redox dye CTC and microautoradiography). Depending on the staining method applied, cell biomasses yielded 15-86% of the biomass defined by the model, and good correlations between cell biomass and model biomass were found. Cell biomass, oxygen uptake and acetate uptake were measured in wastewater, where acetate was added. Substrate uptake rates were found not to be proportional to the increases in cell biomass, suggesting that only a small fraction of the cell biomass was responsible for the main part of the substrate uptake. Despite the differences found between cell biomass and model biomass, it was recommended to use the conceptual model as an engineering tool for simulation of microbial processes and wastewater quality changes. However, there should be a clear distinction between the terms 'model biomass', 'cell biomass' and different activity measurements of cells.     

Method of Calculating the Charge Acceptance of Organic Photoconductors

The charge acceptance of organic photoconductors (OPC) consisting of thin layers must attain the correct value in order to produce constant copy quality. In practice, however, it can be kept constant only by taking elaborate precautions, since a number of parameters have an adverse effect on charge acceptance. The limits are described within which the photoconductors and corona properties fluctuate in actual running machines. The properties of the photo-conductor can scarcely be influenced by the user, but proper choice of the electric parameters of the charging scorotron can largely suppress the influence of the fluctuations on the final charge of the photo-conductor. If the charging device exhibits the behavior of an ideal constant voltage supply characteristic, charge acceptance would depend solely on the tolerances of this device. If the charging device supplies constant current, charge acceptance depends primarily on the properties of the photoconductor. A careful estimate must be made to determine, under conditions as practical as possible, reasons for variations in charge acceptance. There are those caused by fluctuations in the charging device and those caused by fluctuations in the photoconductor. A mathematical method is described which makes it relatively simple to determine the actual OPC charge acceptance depending on application and variation of the electrical parameters.     

Lyapunov based predictive control of vehicle drivetrains over CAN

Vehicle drivetrains are characterized by fast dynamics, subject to physical and control constraints, which make controller design for driveline oscillations damping a challenging problem. Furthermore, in current implementations, the connections between the controller and the physical plant are realized using a controller area network (CAN) as the communication medium, which introduces time-varying delays. As such, the goal of this paper is to provide a control design methodology that can cope with all these challenges and limitations and still yield an effective solution. To this end, firstly, a continuous-time model of a vehicle drivetrain is derived. Then, a method for determining a worst case upper bound on the delays that can be introduced by a CAN is presented, which enables the usage of a polytopic approximation technique to obtain a discrete-time model of the closed-loop CAN system. Thirdly, a non-conservative Lyapunov based predictive controller is designed for the resulting model with time-varying delays, polytopic uncertainty and hard constraints. Several tests performed using an industry validated drivetrain model and the Matlab toolbox TrueTime indicate that the proposed design methodology can handle both the performance/physical constraints and the strict limitations on the computational complexity, while effectively coping with time-varying delays. Preliminary real-time results further validate the proposed methodology.     

Working mechanism of a high temperature (200°C) synthetic cement retarder and its interaction with an AMPS®‐based fluid loss polymer in oil well cement

A copolymer comprising of 2‐acrylamido‐2‐methyl propane sulfonic acid (AMPS®) and itaconic acid (molar ratio 1 : 0.32) was synthesized by aqueous free radical polymerization and probed as high temperature retarder for oil well cement. Characteristic properties of the copolymer including molar masses (M_w and M_n), polydispersity index and anionic charge amount were determined. The copolymer possesses a M_w of ～ 2 × 10⁵ g/mol and is highly anionic. HT/HP consistometer tests confirmed effectiveness of the retarder at temperatures up to 200°C. The working mechanism of NaAMPS®‐co‐itaconic acid was found to rely exclusively on its huge calcium binding capacity (5 g calcium/g copolymer). It reduces the amount of freely dissolved, nonbound calcium ions present in cement pore solution and thus hinders the growth of cement hydrates because of lack of calcium. The value for the calcium binding capability is 46 times higher than the stoichiometric amount per ? COO^? functionality. Consequently, calcium also coordinates to other donor atoms present in the retarder. NaAMPS®‐co‐itaconic acid also adsorbs onto cement, as was evidenced by TOC analysis of cement filtrates, zeta potential measurement and decreased rheology of cement pastes. However, adsorption plays no role in the retarding mechanism of this copolymer. Combination of NaAMPS®‐co‐itaconic acid retarder with a common CaAMPS®‐co‐NNDMA fluid loss additive (FLA) revealed that competitive adsorption on cement between these two admixtures occurs. The retarder fills interstitial adsorption sites on cement located between those occupied by the larger FLA molecules. In consequence, fewer amounts of CaAMPS®‐co‐NNDMA can adsorb and its effectiveness is reduced. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

C-Testable modified-Booth multipliers

In this paper the testability of modified-Booth array multipliers for standard cells based design environments is examined for first time. In such cases the structure of the cells may be unknown, thus Cell Fault Model (CFM) is adopted. Two C-testable designs are proposed. A design for an N _x × N_y bits modified-Booth multiplier, which uses ripple carry addition at the last stage of the multiplication, is first proposed. The design requires the addition of only one extra primary input and 38 test vectors with respect to CFM. A second C-testable design is given using carry lookahead addition at the last stage which is the case of practical implementations of modified-Booth multipliers. Such a C-testable design using carry lookahead addition is for first time proposed in the open literature. This second design requires the addition of 4 extra primary inputs. One-level and two-levels carry lookahead adders, are considered. The C-testable design requires 61 test vectors for the former and 73 test vectors for the latter, respectively. The hardware and delay overheads imposed by both C-testable designs are very small and decrease when the size of the multiplier increases.     

Plate tectonic reconstructions with continuously closing plates

We present a new algorithm for modeling a self-consistent set of global plate polygons. Each plate polygon is composed of a finite list of plate margins, all with different Euler poles. We introduce a "continuously closed plate" (CCP), such that, as each margin moves independently, the plate polygon remains closed geometrically as a function of time. This method solves emerging needs in computational geodynamics to combine kinematic with dynamic models. Because they have polygons that are too widely spaced in time and have inconsistent motions between margins and plates, traditional global plate tectonic reconstructions have become inadequate for geodynamics. The CCP algorithm has been incorporated into the GPlates open-source paleogeographic system. The algorithm is a set of procedures and data structures that operate on collections of reconstructed geometric data to form closed plate polygons; the main data structures used for each plate polygon are based on a nested hierarchy of topological elements. Reconstructions with CCPs can be created, edited, visualized, and exported with GPlates. The native storage of the dynamic reconstructions is the GPlates Markup Language, GPML, which uses an XML-based file format called GML. We demonstrate the utility of the CCP method by creating a global reconstruction with continuously closing plates from 140 Ma to the present using data from existing, traditional reconstructions.     

Studies on physico-chemical and antibacterial properties of grafted pullulans solutions

The physico-chemical properties of three grafted pullulans (P) having linked poly(3-acrylamidopropyl)trimethylammonium chloride (pAPTAC) as side chains (P-g-pAPTAC1, P-g-pAPTAC2 and P-g-pAPTAC3 with 22.53, 29.05, and 34.51 (wt.%) of pAPTAC content in polymer, respectively) and possessing polyelectrolyte character were determined by light scattering analysis. All grafted pullulan aqueous solutions were tested in the presence of 0.5 M NaCl, KCl, NaNO₃ or KNO₃. The biggest associations were recorded in 0.5 M NaCl aqueous solutions for P-g-pAPTAC1, P-g-pAPTAC2 and P-g-pAPTAC3 according to the maximum values for R_g extracted from MALLS (multiangle laser light scattering) measurements. Also, the dominant conformation in salted solution of these polyelectrolytes was random coil as Debye plot analysis revealed. Antibacterial activity was tested by Kirby–Bauer diffusion method and all grafted pullulans dissolved in aqueous solutions of 0.5 M NaCl have developed inhibition zone against Staphylococcus aureus (ATCC 25923).