Packing products for customers: an ergonomics evaluation of three supermarket checkouts

The introduction of laser scanners at supermarket checkout areas has resulted in previous ergonomics studies focusing specifically on the scanning process and associated cumulative trauma disorders in the hands and arms. Few studies have evaluated the increased musculoskeletal load and exertion of checkout staff when they are also expected to pack the products into bags for the customers. This paper describes an ergonomics evaluation of three different designs of checkout workstation, which require the operator to stand when they scan the products, pack them into plastic bags and transfer the packed bags to the customer. Musculoskeletal load and exertion associated with the different checkouts were measured using OWAS, heart rate recordings and ratings of perceived exertion. In addition, subjective rankings of the workstations were obtained and the productivity associated with each design examined as part of the evaluation. Some of the variables measured showed significant differences in postural load between the workstations. The results of the evaluation formed the basis of recommendations for an improved workstation design. Some of the suggestions made to reduce postural load and increase productivity include positioning the weigh scale to the side and the bag frame beneath the scanner.     

Three-dimensional space-vector modulation algorithm for four-leg multilevel converters using abc coordinates

In this paper, a novel three-dimensional (3-D) space-vector algorithm for four-leg multilevel converters is presented. It can be applied to active power filters or neutral-current compensator applications for mitigating harmonics and zero-sequence components using abc coordinates (referred from now on this paper as natural coordinates). This technique greatly simplifies the selection of the 3-D region where a given voltage vector is supposed to be found. Compared to a three-level modulation algorithm for three-leg multilevel converters, this algorithm does not increase its complexity and the calculations of the active vectors with the corresponding switching time that generate the reference voltage vector. In addition, the low-computational cost of the proposed algorithm is always the same and it is independent of the number of levels of the converter.     

Serial concatenation of Hermitian codes with ring‐TCM codes

Hermitian codes are a class of very long algebraic‐geometric (AG) codes constructed from Hermitian curves, which outperform Reed–Solomon codes defined over the same finite fields and with the same code rates, as recently demonstrated by the authors. However, since there are no soft‐decision decoding algorithms for AG codes in the literature, the performance of Hermitian codes is limited and their potential is yet to be realized. An alternative method for achieving more significant coding gains is presented in this paper by serially concatenating long Hermitian codes with ring‐trellis‐coded modulation codes over the ring of integers ?₄ and evaluating their performance through simulation results on the AWGN and Rayleigh fading channels. The scheme achieves large coding gains over single Hermitian and Reed–Solomon codes with no increase in bandwidth use and a performance comparable with the well‐known capacity‐approaching codes. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of planar inductors in low temperature co-fired ceramic technology

A simple bisection algorithm for the synthesis of planar inductors using a fast electromagnetic analysis algorithm is presented in this work. Both bisection and electromagnetic analysis algorithms are based on a set of heuristic and physical rules obtained from the study of the electromagnetic behavior of these planar devices. With this procedure, the benefits are two fold: (i) the number of iterations is kept moderately low in the synthesis loop, and (ii) the analysis at each iteration step is speed up without compromising accuracy. The algorithm is applied to the development of an inductor library for a low temperature co-fired ceramic process technology.     

Modeling the sequential switching shunt series regulator

This letter characterizes, in terms of the bandwidth and limit cycle frequency of its constituent subsystems, the sequential switching shunt series regulator -S/sup 4/R, a high-efficiency, low-mass and volume power cell devised to power the next generation of regulated power buses in telecommunication spacecrafts. Transconductance power source modeling is used to obtain linear and nonlinear models. These are used to establish a design control strategy which involves the dynamic response in large load requirements or at the end of the satellite life. Simulations and experimental results are also given to demonstrate the validity of the model.     

Space‐time ring‐TCM codes with CPM based on the decomposed model for transmission over Rayleigh fading channels

Space–time (ST) coding is a proved technique for achieving high data rates in 3G mobile systems that combines coding, modulation and multiple transmitters and receivers. A novel algorithm is proposed for ST ring trellis‐coded modulation (ST‐RTCM) systems with continuous‐phase modulation (CPM) when the channel coefficients are known to the receiver. This algorithm is based on the CPM decomposed model, which exploits the memory properties of this modulation method, resulting in a straightforward implementation of joint ST coding and CPM, which is particularly suitable for ring codes. This new scheme is used to investigate the performance of the delay diversity code with CPM over slow Rayleigh fading channels, in particular with MSK which is one of the most widely used modulation methods of continuous phase. Furthermore, a feedback version of delay diversity allowed by the decomposition is tested in 1REC and 1RC systems. This feedback configuration is seen to provide good results for low signal‐to‐noise ratios. Simulations results are also provided for multilevel ST‐RTCM codes that achieve a higher throughput than MSK‐coded systems. Additionally the serial concatenation of an outer Reed–Solomon code with an ST‐RTCM code is shown, this combination further reduces the error probability and achieves even more reliable communications. Copyright © 2005 John Wiley & Sons, Ltd.     

Bit error rate evaluation of linear equalization in FWA systems

The bit error rate performance of broadband wireless fixed access (FWA) systems over multipath fading channels is investigated in this paper. Linear MMSE equalization is examined theoretically for 16‐QAM and QPSK modulated FWA systems and shown to yield unsatisfactory performance. The theoretical analysis is validated by Monte‐Carlo simulations and proved to be reasonably accurate. It provides us an insight into the physical limitations imposed by the FWA channels and suggest solutions to improve the capacity and performance of future FWA systems. Copyright © 2006 John Wiley & Sons, Ltd.     

Unprecedented Improvement of Single Li‐Ion Conductive Solid Polymer Electrolyte Through Salt Additive

Solid‐state lithium metal (Li°) batteries (SSLMBs) are believed to be the most promising technologies to tackle the safety concerns and the insufficient energy density encountered in conventional Li‐ion batteries. Solid polymer electrolytes (SPEs) inherently own good processability and flexibility, enabling large‐scale preparation of SSLMBs. To minimize the growth of Li° dendrites and cell polarization in SPE‐based SSLMBs, an additive‐containing single Li‐ion conductive SPE is reported. The characterization results show that a small dose of electrolyte additive (2 wt%) substantially increases the ionic conductivity of single Li‐ion conductive SPEs as well as the interfacial compatibility between electrode and SPE, allowing the cycling of SPE‐based cells with good electrochemical performance. This work may provide a paradigm shift on the design of highly cationic conductive electrolytes, which are essential for developing safe and high‐performance rechargeable batteries.     

Intratumoral Thermal Reading During Photo‐Thermal Therapy by Multifunctional Fluorescent Nanoparticles

The tremendous development of nanotechnology is bringing us closer to the dream of clinical application of nanoparticles in photothermal therapies of tumors. This requires the use of specific nanoparticles that must be highly biocompatible, efficient light‐to‐heat converters and fluorescent markers. Temperature reading by the heating nanoparticles during therapy appears of paramount importance to keep at a minimum the collateral damage that could arise from undesirable excessive heating. In this work, this thermally controlled therapy is possible by using Nd³⁺ ion‐doped LaF₃ nanocrystals. Because of the particular optical features of Nd³⁺ ions at high doping concentrations, these nanoparticles are capable of in vivo photothermal heating, fluorescent tumor localization and intratumoral thermal sensing. The successful photothermal therapy experiments here presented highlight the importance of controlling therapy parameters based on intratumoral temperature measurements instead of on the traditionally used skin temperature measurements. In fact, significant differences between intratumoral and skin temperatures do exist and could lead to the appearance of excessive collateral damage. These results open a new avenue for the real application of nano­particle‐based photothermal therapy at clinical level.