Analysis and design of punctured rate-1/2 turbo codes exhibiting low error floors

The objective of this paper is two-fold. Initially, we present an analytic technique to rapidly evaluate an approximation to the union bound on the bit error probability of turbo codes. This technique exploits the most significant terms of the union bound, which can be calculated straightforwardly by considering the properties of the constituent convolutional encoders. Subsequently, we use the bound approximation to demonstrate that specific punctured rate-1/2 turbo codes can achieve a lower error floor than that of their rate-1/3 parent codes. In particular, we propose pseudo-random puncturing as a means of improving the bandwidth efficiency of a turbo code and simultaneously lowering its error floor.     

Dose evaluation in lung-equivalent media in high-energy photon external radiotherapy

In high-energy photon external radiotherapy treatment planning systems (TPSs) are used to calculate the dose to the target volume and the dose distribution around it. Commonly used TPSs include algorithms based on measurements in water and often fail in the estimate of dose in the presence of heterogeneities. In this study TL detectors were used to study the reliability of the Cadplan (Varian) TPS in the presence of low-density heterogeneities such as the lung for 6 and 18 MV photon beams at different field sizes. TL measurements were compared with TPS calculations and Monte Carlo simulations performed with the PENELOPE MC code. In a phantom with lung heterogeneity, TL measurements and MC simulations agreed, with an average deviation inside the lung of 2%. In contrast, TPS results overestimated the dose inside the lung, with a maximum deviation of 39% for the 18 MV photon beam and a field size of 2 x 2 cm(2).     

Serial concatenation of Hermitian codes with ring‐TCM codes

Hermitian codes are a class of very long algebraic‐geometric (AG) codes constructed from Hermitian curves, which outperform Reed–Solomon codes defined over the same finite fields and with the same code rates, as recently demonstrated by the authors. However, since there are no soft‐decision decoding algorithms for AG codes in the literature, the performance of Hermitian codes is limited and their potential is yet to be realized. An alternative method for achieving more significant coding gains is presented in this paper by serially concatenating long Hermitian codes with ring‐trellis‐coded modulation codes over the ring of integers ?₄ and evaluating their performance through simulation results on the AWGN and Rayleigh fading channels. The scheme achieves large coding gains over single Hermitian and Reed–Solomon codes with no increase in bandwidth use and a performance comparable with the well‐known capacity‐approaching codes. Copyright © 2007 John Wiley & Sons, Ltd.     

Unprecedented Improvement of Single Li‐Ion Conductive Solid Polymer Electrolyte Through Salt Additive

Solid‐state lithium metal (Li°) batteries (SSLMBs) are believed to be the most promising technologies to tackle the safety concerns and the insufficient energy density encountered in conventional Li‐ion batteries. Solid polymer electrolytes (SPEs) inherently own good processability and flexibility, enabling large‐scale preparation of SSLMBs. To minimize the growth of Li° dendrites and cell polarization in SPE‐based SSLMBs, an additive‐containing single Li‐ion conductive SPE is reported. The characterization results show that a small dose of electrolyte additive (2 wt%) substantially increases the ionic conductivity of single Li‐ion conductive SPEs as well as the interfacial compatibility between electrode and SPE, allowing the cycling of SPE‐based cells with good electrochemical performance. This work may provide a paradigm shift on the design of highly cationic conductive electrolytes, which are essential for developing safe and high‐performance rechargeable batteries.     

A new method for reliability analysis and reliability-based design optimization

Structural and Multidisciplinary Optimization - We present a novel method for reliability-based design optimization, which is based on the approximation of the safe region in the random space by a...     

Evaluation of the scale integrity in the Al2O3/MA956 system at different polarisation by using EIS

In this work anodic polarisation test and electrochemical impedance spectroscopy (EIS) are combined to evaluate the integrity of the alumina layer generated “in situ” at high temperature (1100°C/3 h) on MA956 alloy. The SEM observations did not show the presence of voids or porosity in the alumina layer and a good adherence was revealed with the metallic substrate. The electrochemical response of the scale/metal system has been evaluated at different points of the anodic polarisation curve. In general, a polarisation applied to the sample, below the breakdown potential, did not affect the EIS results, irrespective of the polarisation withstood by the system. In other cases, besides the slightly higher current density measured during the anodic polarisation test, a decrease in the impedance modulus was observed. This behaviour could be related to the presence of microdefects in the scale, not visible by SEM, which become increasingly and/or connected during the polarisation test. The very low corrosion current densities in the passive region, about 10⁻⁹ A/cm², and the high polarisation that the alumina layer withstands till breakdown occurs confirm the excellent corrosion protection provided by the scale. Once breakdown of the alumina layer occurs, a good repassivation of the system is observed due to the high chromium content of the alloy.     

Glycoalkaloids in potato tubers: the effect of variety and drought stress on the α‐solanine and α‐chaconine contents of potatoes

Six varieties of Solanum tuberosum L potato grown in the Bolivian highlands under drought stress, with and without irrigation, were analysed for their content of glycoalkaloids (GAs). The plant material consisted of three drought‐tolerant varieties from a local breeding programme (PROINPA), Potosina, Chapaquita and Pampeña, and three control cultivated varieties, Malcacho, Sani Imilla and Desiree, either susceptible or relatively tolerant to drought. α‐Solanine and α‐chaconine were quantified in both the peel and flesh of the tubers. A significant increase in GA concentration (α‐solanine + α‐chaconine) was observed under drought stress conditions in most varieties; average concentration increases of 43 and 50% were registered in the improved and control cultivars respectively. In all tested cultivars, however, the GA concentration remained lower than the recommended food safety level (200 mg kg⁻¹ fresh tubers). It ranged from 52.4 to 100 mg kg⁻¹ fresh tubers in the improved cultivars and from 55.6 to 122.3 mg kg⁻¹ fresh tubers in the controls. In the improved and control varieties the α‐solanine content averaged 42.6 and 35.4% of the total potato GAs respectively and was not significantly affected by drought stress, except in Desiree. In all conditions the peel contained the greatest proportion of total GAs. The hybrid variety Pampeña (new drought‐tolerant variety) contained the lowest amounts of GAs, which were lower than those of the control varieties, with and without irrigation. © 2000 Society of Chemical Industry     

Ultrastructural Study of Platelet Behavior and Interrelationship in Sprouting and Intussusceptive Angiogenesis during Arterial Intimal Thickening Formation

Platelets in atherosclerosis, bypass stenosis, and restenosis have been extensively assessed. However, a sequential ultrastructural study of platelets in angiogenesis during the early phases of these lesions has received less attention. Our objective was the study of platelets in angiogenesis and vessel regression during intimal thickening (IT) formation, a precursor process of these occlusive vascular diseases. For this purpose, we used an experimental model of rat occluded arteries and procedures for ultrastructural observation. The results show (a) the absence of platelet adhesion in the de-endothelialized occluded arterial segment isolated from the circulation, (b) that intraarterial myriad platelets contributed from neovessels originated by sprouting angiogenesis from the periarterial microvasculature, (c) the association of platelets with blood components (fibrin, neutrophils, macrophages, and eosinophils) and non-polarized endothelial cells (ECs) forming aggregates (spheroids) in the arterial lumen, (d) the establishment of peg-and-socket junctions between platelets and polarized Ecs during intussusceptive angiogenesis originated from the EC aggregates, with the initial formation of IT, and (e) the aggregation of platelets in regressing neovessels (‘transitory paracrine organoid’) and IT increases. In conclusion, in sprouting and intussusceptive angiogenesis and vessel regression during IT formation, we contribute sequential ultrastructural findings on platelet behavior and relationships, which can be the basis for further studies using other procedures.     

Sheets of branched poly(lactic acid) obtained by one-step reactive extrusion–calendering process: physical aging and fracture behavior

The architectural modifications of a linear poly(D,L-Lactide) acid (PD,L-LA) commercial grade were induced by a one-step reactive extrusion–calendering process using a styrene-glycidyl acrylate copolymer as reactive agent. The melt degradation was counteracted by chain extension and branching reactions, leading to a stabilization of the melt properties and an increase in the molecular weight. For such modified samples [poly(lactic acid) (PLA)-reactive extrusion (REX)], the rate of physical aging at 30 °C was investigated during 1 week in order to simulate industrial storage conditions. Fracture behavior of “de-aged” and “controlled aged” (1 week) samples was investigated using the essential work of fracture (EWF) methodology and the critical tip opening displacement at the crack propagation onset, respectively. These analyses were complemented by digital image correlation analysis and inspection of the fractured surfaces by scanning electronic microscopy. As a result of the architectural modifications, the entanglement network density was increased. Those accounted for a slight decrease in the physical aging rate. Under uniaxial loading, aged reactive extrusion (REX) samples exhibited multiple crazing, leading to a slight increase in strain at break. Nevertheless, as a result of a similar dynamic environment of the entangled polymer coils, de-aged REX samples disclosed similar mechanical properties as compared to their neat counterparts. Regarding de-aged samples, the EWF analysis revealed no changes in the work required for the onset of crack propagation. However, the energy consumed up to the onset of crack propagation of aged PLA-REX samples decreased due to an apparently decreased network extensibility, promoting a premature craze–crack transition.