基于小波的实时烟雾检测*

传统的离子式、吸气式、光电式等烟雾检测器在大空间中检测烟雾时,会受到发射信号与接收信号之间的距离、平面角度、精确对准等限制,无法对整个空间的烟雾状况进行描述.新的方法通过监测区域的摄像机拍摄的视频图像序列,进行小波变换,分析图像帧在时域和空域的频率特性,来确定被监测区域是否有火灾烟雾的发生.实验证明该方法不受空间高度、热障、易爆、有毒等环境的限制,并且有灵敏度高、抗干扰力强、适用范围广等特点.     

A New Triazole-Thiol Compound Organofunctionalized on the Silica Gel Surface: Chemical Properties and Copper Sorption in Ethanol / Water Media

Silicon - This study describes the preparation and characterization of 3-chloropropyl silica gel with 4-amino-5-(4pyridyl)-4H-1,2,4-triazole-3-thiol (SGA) for copper adsorption in different media....     

Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Considering the high levels of materials used in the fields of electronics and energy storage systems, it is increasingly necessary to take into consideration environmental impact. Thus, it is important to develop devices based on environmentally friendlier materials and/or processes, such as additive manufacturing techniques. In this work, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared by direct-ink-writing (DIW) by varying solvent evaporation temperature and fill density percentage. Different morphologies for both polymers are obtained, including dense films and porous membranes, as well as different electroactive β-phase content, thermal and mechanical properties. The dielectric constant and piezoelectric d₃₃ coefficient for dense films reaches up to 16 at 1 kHz and 4 pC N⁻¹, respectively for PVDF-HFP with a fill density of 80 and a solvent evaporation temperature of 50 °C. Porous structures are developed for battery separator membranes in lithium-ion batteries, with a highest ionic conductivity value of 3.8 mS cm⁻¹ for the PVDF-HFP sample prepared with a fill density of 100 and a solvent evaporation temperature of 25 °C, the sample showing an excellent cycling performance. It is demonstrated that electroactive films and membranes can be prepared by direct-ink writing suitable for sensors/actuators and energy storage systems.     

Global insight into microwave stoneware firing: Macro and microstructural changes

Industrial competition and environmental concerns lead to the exploration of alternative and energy-efficient technologies for ceramic materials processing. The main objective of this work was to present microwave heating as a viable option for stoneware processing. Stoneware functional properties are presented and discussed, with emphasis on impact strength, water absorption, porosity, and color. Microstructure analyses show that microwave- and gas-fired samples have higher densifications than electrically fired samples. A relevant finding for processing conditions is that microwave firing requires temperatures approximately 100°C lower than those required by conventional firing. Microwave-fired samples’ rupture energies are approximately twice (0.57 ± 0.06 (J)) those of the reference samples (0.26 ± 0.03 (J)), and their water absorptions are approximately one-half (1.5% at 1170°C and 0.8% at 1190°C) of those of the reference samples (2.0%), whereas the water absorption of electrically fired samples at 1180°C has been estimated to be 7.5%. Color analysis also evidences a shift to lower microwave firing temperatures, what is attributed to the enhanced transformations promoted by microwave heating when comparing with the transformations promoted by conventional (gas or electric) heating.     

Stress relaxation behavior of Ti-6Al-4V alloy

1　INTRODUCTIONTi 6Al 4VisoneofthemostimportantTial loys[1,2 ] .Butthisalloyhasbadformabilityforitshighelasticresilience .Therefore ,hotsizingisimpor tant[36 ] .Asthebaseofhotsizing ,thestudyofstressrelaxationhasimportanttheoreticalvalueandpracticalsignificance .Ontheotherhand ,Ti 6Al 4Visusedasfastenermaterialssometimes .Whenthefastenersworkatthetemperaturehigherthanroomtemperature ,stressrelaxationmayresultsinacci dents .Sohowtopreventthestressrelaxationisveryimportant[7] .Uptonow ,…     

Hydrogen-helium scattering cross-sections for transmission elastic recoil detection analysis

¹H(,p) ⁴He scattering cross-sections were determined for the 6.5–13 MeV (incident energy) range, thereby extending the energy range for such data beyond that available in the literature. These values are essential for the further development of hydrogen concentration profiling by the transmission elastic recoil detection technique, of particular interest in the design of surface-engineered hydrogen contamination barriers for steels.     

Surface Pretreatments of Silicon Nitride for CVD Diamond Deposition

The efficiency of different surface pretreatments (four standard chemical etchings and four diamond powder abrasive procedures) on silicon nitride (Si₃N₄) substrates for chemical vapor deposition (CVD) of diamond has been systematically investigated. Blank Si₃N₄ samples were polished with colloidal silica (∼0.25 μm). Diamond nucleation and growth runs were conducted in a microwave plasma chemical vapor deposition apparatus for 10 min and 6 h, respectively. Superior results concerning nucleation density ( N _d∼ 10¹⁰ cm⁻² after 10 min), film uniformity, and grain size (below 2 μm after 6 h) were obtained for the mechanically microflawed samples, revealing that chemical etchings (hot and cold strong acids, molten base or CF₄ plasma) are not crucial for good CVD diamond quality on Si₃N₄.     

Supported Molybdenum Carbides Lie Between Metallic and Sulfided Catalysts for Deep HDS

Hydrodesulfurization (HDS) of 4,6-dimethyldibenzothiophene on alumina-supported Mo₂C has been studied. These catalysts are stable and active under deep HDS conditions (0-250 wt ppm S). However, although they are well known to have hydrogenation properties, they lead preferentially to a non-hydrogenated product of the HDS reaction: dimethylbiphenyl. For the same reaction, supported platinum and sulfided molybdenum oxide lead to the hydrogenated products dimethyldicyclohexyl and methylcyclohexyltoluene, respectively. The ranking of HDS activity is as follows: MoS₂/Al₂O₃ < Mo₂C/Al₂O₃ < Pt/SiO₂.     

Color and COD retention by nanofiltration membranes

In the present study the application of the nanofiltration process was investigated mainly in the retention ofcolor and chemical oxygen demand (COD) present in textile industry wastewater. Nanofiltration experiments were carried out in a pilot unit, operating in crossflow. Three different types of spiral wound membranes, DK 1073, NF 45 and MPS 31 were used simultaneously in the same unit. The results of the tests showed that for color retention, the values were around 99% for the DK 1073 and NF 45 membranes and the 87% for COD retention for the DK 1073. The permeate flux for the different wastewaters varied from 30.5 to 70 L/h.m². Fouling was observed in all membranes due to the accumulation of molecular species close to the filtering surface. The process was efficient and promising for the reuse of wastewater from this type of industry.     

A two-step reaction mechanism of oxygen release from Pd/CeO2: mathematical modelling based on step gas concentration experiments

Topics in Catalysis - A mathematical model has been developed to study the transient release of oxygen from a 1 wt% Pd/CeO2 catalyst in the 450–550&nbsp;°C range based on alternate...