Physicochemical and Bioactive Compounds of ‘Cantaloupe’ Melon: Effect of Ozone Processing on Pulp and Seeds

Melon seeds are an important source of bioactive compounds, which are considered to be health beneficial. Therefore, the objective of this work was to assess the impact of gaseous ozone treatments (30 and 60 min) on melon seeds paste (nonedible part) and compare with the effect on pulp (edible part). Ozone treatments were evaluated in terms of physicochemical (color, pH, and soluble solids content) and nutritional profiles (total phenolics, total carotenoids, and total antioxidant capacity) of processed material. Results indicate that ozone has a different impact on the two fruit matrices, being seeds less affected by this preservation treatment.     

Microwave-Hydrothermal Synthesis of Nanophase Ferrites

This paper reports the synthesis of technologically important ferrites such as ZnFe₂O₄, NiFe₂O₄, MnFe₂O₄, and CoFe₂O₄ by using novel microwave-hydrothermal processing. Nanophase ferrites with high surface areas, in the range of 72-247m²/g, have been synthesized in a matter of a few minutes at temperatures as low as 164°C. The rapid synthesis of nanophase ferrites via an acceleration of reaction rates under microwave-hydrothermal conditions is expected to lead to energy savings.     

Enzymatic degradation of thermoresponsive poly(N‐isopropylacrylamide) grafted to carboxymethylcellulose copolymers

The enzymatic degradation of poly(N‐isopropyl acrylamide) (PNIPAM) grafted to carboxymethylcellulose (CMC) copolymers with a cellulasic preparation (Trichoderma viride) was studied. The enzymatic activity of the cellulasic preparation against CMC and the grafted copolymers was determined by the Petterson–Porath method, while their reduced viscosity variation in the presence of the same preparation was also followed. It has been shown that the enzymatic degradation behavior depends on the copolymer composition and the reaction temperature. Reducing sugars analysis showed that the experimental values for the grafted copolymers were higher than the calculated ones. At 50°C, the enzymatic reaction is completed in about 20 min for the copolymers, whereas for CMC it takes more than 40 min. It can be concluded that their enzymatic degradation is facilitated by the presence of the PNIPAM grafts. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1383–1386, 2003     

Compatibility of polysaccharide/maleic copolymer blends. IV. Thermal behavior of hydroxypropyl cellulose‐containing blends

The compatibility of the hydroxypropyl cellulose (HPC) with maleic acid–vinyl acetate copolymer in the solid state was studied by thermogravimetry, thermo‐optical analysis, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and optical microscopy. It was established that physical interactions are prevalent in blends with a high content of HPC, whereas chemical interactions predominate in blends with a medium and low content of HPC. By increasing the temperature, the thermochemical reactions are favored. Thermal properties are dependent on the mixing ratio of the components. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2585–2597, 2003     

Ion‐exchange resins. II. Acrylamide crosslinked copolymers as precursors for some ion exchangers

Crosslinked copolymers of acrylamide (AA) and ethylacrylate and some ion exchangers derived from them containing either primary amine groups, obtained by the Hofmann degradation of the amide groups, or carboxylic groups, obtained by the alkaline hydrolysis of the ester groups, were studied. Divinylbenzene and N,N′‐methylenebisacrylamide were used as crosslinkers. The starting copolymers and the corresponding ion exchangers were characterized by IR spectroscopy, swelling behavior, and thermogravimetric analysis. The ion‐exchanger properties were correlated with the crosslinker nature and the chemical reactions performed on the AA copolymers. The average molecular weight between two crosslinks, determined from the swelling data in water, was compared with that calculated on the basis of the copolymerization stoichiometry only for the carboxylic cation exchangers. In this way, the preservation of the crosslink density after the hydrolysis was revealed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2701–2707, 2003     

Identification of Hck Inhibitors As Hits for the Development of Antileukemia and Anti‐HIV Agents

Hematopoietic cell kinase (Hck) is a member of the Src family of non‐receptor protein tyrosine kinases. High levels of Hck are associated with drug resistance in chronic myeloid leukemia. Furthermore, Hck activity has been connected with HIV‐1. Herein, structure‐based drug design efforts were aimed at identifying novel Hck inhibitors. First, an in‐house library of pyrazolo[3,4‐d]pyrimidine derivatives, which were previously shown to be dual Abl and c‐Src inhibitors, was analyzed by docking studies within the ATP binding site of Hck to select the best candidates to be tested in a cell‐free assay. Next, the same computational protocol was applied to screen a database of commercially available compounds. As a result, most of the selected compounds were found active against Hck, with K_i values ranging from 0.14 to 18.4 μM , confirming the suitability of the computational approach adopted. Furthermore, selected compounds showed an interesting antiproliferative activity profile against the human leukemia cell line KU‐812, and one compound was found to block HIV‐1 replication at sub‐toxic concentrations.     

Thermal and mechanical properties of PES/PTFE composites and nanocomposites

Polyethersulphone/polytetrafluoroethylene (PES/PTFE) nanocomposites and composites were prepared by precipitation of PES into a PTFE latex‐containing nanoparticles. Different samples were obtained by varying the relative ratio between PES and PTFE. The complex crystallization process, discussed within the fractionated crystallization frame, allowed to identify and quantify different dispersion degree of the PTFE nanoparticles within the PES matrix. The different samples were thus divided into nanocomposite and composites. The effect of crystalline PTFE domains on the mobility of PES was investigated and discussed. The dynamic‐mechanical behavior was explained in terms of the particle aggregation state. The mechanical properties of the PES/PTFE composites were found to depend on both the dispersion and the concentration of the PTFE nanoparticles. In the glassy state the stiffness of the materials was found to increase with the dispersion degree, resulting higher for the nanocomposite with respect to composites. On the contrary, in the rubbery state the modulus was found proportional to the PTFE nanoparticles concentration, resulting higher in the composites with respect to the nanocomposite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3624–3633, 2013     

Time-Dependence of the Adhesion of Micrometer-Size Particles to Substrates: Correlation with Postdeposition Particle Rotation

The time dependence of the detachment force of 7-µm ground polyester particles coated with silica nanoparticles from a ceramer-coated substrate was determined by ultracentrifugation. The detachment force of the particles from the substrate was found to increase with the time since the particle deposition. Scanning electron microscopy (SEM) results show that, following deposition, the particles rotate at approximately the same scale as the observed increase in the detachment force. This suggests that the increase in adhesion may be due to particle rotation from their initial positions obtained upon deposition to a more stable position that results from torques generated by either electrostatic or van der Waals forces acting on the particles.