Shelf life extension of beef retail cuts subjected to an advanced vacuum skin packaging system

Vacuum skin packaging (VSP) is a new and promising technology that includes the instantaneous heating of the upper packaging film immediately before its descent over the meat surface. In the present paper we evaluated this technology for the packaging of a wide variety of beef retail cuts and compared this with traditional vacuum packaging (TVP) performed in parallel. Shelf-life and quality evolution was estimated by analysing three spoilage bacterial groups, an ubiquitous psychrotrophic food pathogen, and three biochemical and physico-chemical attributes throughout 40 days of storage at 4 °C. Statistically-significant lower microbial counts were obtained for all microbial parameters and meat types. The VSP lot exhibited lower pH. This, however, involved a lower water holding capacity and a higher degree of firmness, the latter indicating a limited tenderisation process in the VSP batch. Extended aging times in the carcasses were studied to improving the tenderness of VSP samples. The extension of the aging process prior to VSP may be useful for improving the tenderness of certain meat types and to improve the sensory quality of meat cuts processed under this system.     

The influence of fluorinated molecules (semiochemicals and enzyme substrate analogues) on the insect communication system

Can the introduction of fluorine atoms affect the bioactivity of natural semiochemicals? Can fluorine contribute in the creation of specific enzyme inhibitors to interrupt or disrupt the insect communication system? The first step for the bioactivity of a molecule is interaction with the biological sensor. Hydrogen and fluorine are almost bioisosteric and the receptor site of the enzyme can still recognize and accept the fluoro analogue of its natural substrate. However, the peculiar electronegativity of the fluorine atom can affect the binding, absorption, and transport of the molecule. The differences in the molecule's electronic properties can lead to differences in the chemical interactions between the receptor and the fluorinated substrate. Fluorine introduction can modify the metabolic stability and pathway of the semiochemicals in many different ways. Fluorinated analogues can show synergism, inhibition, or hyperagonism effects on insect behaviors, that is, the activity of the nonfluorinated parent compounds can be mimicked, lost, or increased. In any case, the fluorinated molecules can interact with the bioreceptors in a new and disrupting way. The semiochemicals are olfactory substances: fluorine can affect their volatility or smell. Production of semiochemicals from exogenous substances, perception at antennal receptors, and processing of biological responses are the main steps of communication among insects. In the production step, the fluorinated molecules can interact with enzymes that catalyze the biosynthesis of the natural pheromones. In the perception step, fluorinated semiochemicals can interact with the olfactory receptor cells; this often leads to totally unpredictable behaviors. Fluorinated molecules have been developed as probes to elucidate the complex chemorecognition processes of insects. Many of these molecules have been tested to find highly effective behavior-modifying chemicals. New analogues have been synthesized to investigate the metabolic pathway of a pheromone molecule and many of them are promising disrupting agents. Despite such titanic research efforts, the results have often been random, rational trends in the induced behaviors have sometimes been impossible to find, and practical applications of the fluorinated semiochemicals are still uncertain.     

Influence of air abrasion preparation on microleakage in glass ionomer cement restorations

The aim of this study was to assess microleakage in class V cavities prepared by air abrasion or high-speed dental bur and restored with different glass ionomer cements. Sixty bovine incisors were equally divided into 6 groups: I, II and III (preparation by high-speed) and IV, V and VI (preparation by air abrasion). Groups I and IV were restored with Fuji IX; groups II and V with Ketac Molar; and groups III and VI with Vitremer. After 24 h (37 °C), specimens were thermocycled, isolated with nail varnish, immersed in a 0.2% Rhodamine B solution for 24 hours, sectioned longitudinally and analyzed for microleakage using an optical microscope connected to a digital camera and a computer. The images were digitized and a software allowed the quantitative evaluation of microleakage in millimeters. Data were analyzed by Wilcoxon and Kruskal-Wallis tests. It was observed that there were significant differences (p ≤ 0.05) between incisal (enamel) and cervical (dentine/cementum) margins, mainly for Ketac Molar; there was no difference (p ≥ 0.05) between preparation methods, except for group II (high-speed/Ketac Molar) that showed higher infiltration; regarding the materials, Ketac Molar demonstrated the highest microleakage values (p ≤ 0.05), and only Vitremer sealed completely both margins of restorations. It was concluded that air abrasion preparation did not influence microleakage in class V restorations with the employed glass ionomer cements.     

Liquid chromatography with mass spectrometry in tandem mode applied for the identification of wine markers in residues from ancient Egyptian vessels

Presented in this paper is a new method for the identification of tartaric acid as a wine marker in archaeological residues from Egyptian vessels using liquid chromatography with mass spectrometry in tandem mode (LC/MS/MS). Owing to the special characteristics of these samples, such as the dryness and the small quantity available for analysis, it was necessary to have a very sensitive and highly specific analytical method to detect tartaric acid at trace levels in the residues. Furthermore, an alkaline fusion was carried out to identify syringic acid derived from malvidin as a red wine marker, in a deposit residue from a wine jar found at the tomb of king Tutankhamun. Malvidin-3-glucoside, the main anthocyanin that gives young wines their red color, polymerizes with aging into more stable pigments. However, the presence of malvidin in ancient residues can be proved by alkaline fusion of the residue to release syringic acid from the pigment, which has been identified, here for the first time, by using the LC/MS/MS method revealing the red grape origin of an ancient Egyptian wine residue.     

The performance of heat pumps in service-comparison of a computer model with a real installation

A comparison is made between a computer model which was developed in an earlier paper and experimental results in which a heat pump was used to heat a house during the heating season 1978–1979. The heat pump used was an air-to-water machine, and it is found that the radiator temperature in the experiment varies according to the heat demand of the house because of the effect of thermal inertia of the water and other thermal masses in the heat transfer system. The computer model simulates this effect, using hourly weather data to calculate the heat demand of the house and assuming that the radiators run at the temperature necessary to supply the heat demand during each hour. The model also calculates the coefficient of performance of the heat pump, and hence calculates the running cost in kilowatt-hours for each hour. The calculated running cost is compared with daily readings of kilowatt-hour meters. It is found that the comparison is very accurate during normal operation of the heat pump, with an accuracy of better than 1 per cent over a period of four months of the heating season, although the accuracy is not always quite so good. A comparison is also made between hourly calculated radiator temperatures and continuous recordings of flow and return temperatures. The comparison in this case is satisfactory, but there is a time lag due to the effect of thermal inertia of the building fabric which the computer model is not intended to simulate.     

Uniqueness and reciprocity in the boundary-initial value problem for a mixture of two elastic solids occupying an unbounded domain

Summary In this paper two uniqueness theorems for an anisotropic mixture of two linear elastic solids are established: The former concerns the mixed boundary-value problem, the latter the displacement problem. These theorems are proved for unbounded domains in the absence of artificial restrictions upon the behaviour of the unknown fields at infinity. A reciprocity theorem is also given.     

Low-density incomplete <Emphasis Type="Italic">LDL</Emphasis><Superscript><Emphasis Type="Italic">T</Emphasis></Superscript> factorizations

A particular class of incomplete factorizations is proposed as preconditioners for the linear system Ax = b where A is a symmetric, large and sparse matrix. The ILDL ^T< (p) factorization (p = 1,2,3, …) determines the density of the lower triangular matrix L selecting the p largest off-diagonal entries of each column during the Gaussian elimination process. This selection may be computationally expensive, but the effectiveness of the preconditioner allows us to choose very low-density factors to reduce both work time and storage requirements. This incomplete factorization can be performed reliably on H-matrices. When A is a positive definite matrix, but not an H-matrix, one can perform an incomplete factorization if positive off-diagonal entries are removed or reduced and diagonally compensated. Numerical results for a variety of problems and comparisons with other incomplete factorizations are presented. Received: August 2002 / Accepted: December 2002 RID="*" ID="*"This work was supported by the Spanish grant BFM 2001-2641.     

Continuous hyperspectral absorption measurements of colored dissolved organic material in aquatic systems

The majority of organic carbon in the oceans is present as dissolved organic matter (DOM); therefore understanding the distribution and dynamics of DOM is central to understanding global carbon cycles. Describing the time-space variability in colored dissolved organic matter (CDOM) has been difficult, as standard spectrophotometric methods for CDOM determination are laborious and susceptible to methodological biases. Previously, measurements of CDOM absorption in discrete water samples by use of a liquid-waveguide capillary cell (LWCC) compared favorably with measurements made with a benchtop spectrophotometer. Given this, we focused on automating the LWCC technique to improve our spatial and temporal sampling capabilities for CDOM. We found strong correlations between CDOM absorption spectra collected from discrete water samples using standard methods and selected corresponding CDOM spectra collected by the automated LWCC system. The near-continuous measurements by the LWCC system made it possible to map the temporal, spatial, and spectral variability of CDOM absorption along the ship track.     

Biological tissue characterization by magnetic induction spectroscopy (MIS): requirements and limitations

Magnetic induction spectroscopy (MIS) aims at the contactless measurement of the passive electrical properties (PEP) sigma, epsilon, and mu of biological tissues via magnetic fields at multiple frequencies. Whereas previous publications focus on either the conductive or the magnetic aspect of inductive measurements, this article provides a synthesis of both concepts by discussing two different applications with the same measurement system: 1) monitoring of brain edema and 2) the estimation of hepatic iron stores in certain pathologies. We derived the equations to estimate the sensitivity of MIS as a function of the PEP of biological objects. The system requirements and possible systematic errors are analyzed for a MIS-channel using a planar gradiometer (PGRAD) as detector. We studied 4 important error sources: 1) moving conductors near the PGRAD; 2) thermal drifts of the PGRAD-parameters; 3) lateral displacements of the PGRAD; and 4) phase drifts in the receiver. All errors were compared with the desirable resolution. All errors affect the detected imaginary part (mainly related to sigma) of the measured complex field much less than the real part (mainly related to epsilon and mu). Hence, the presented technique renders possible the resolution of (patho-) physiological changes of the electrical conductivity when applying highly resolving hardware and elaborate signal processing. Changes of the magnetic permeability and permittivity in biological tissues are more complicated to deal with and may require chopping techniques, e.g., periodic movement of the object.