Synthesis of Nickel Phosphide Nanorods as Catalyst for the Hydrotreating of Methyl Oleate

Arrays of nickel phosphide nanorods were successfully synthesized by nanocasting using mesostructured silica SBA-15 as a hard template (HT-Ni₂P). After temperature-programmed reduction of the phosphate precursor infiltrated within the pore walls of SBA-15, the unsupported material was obtained by removing the silica matrix with diluted HF. The pore channel of the SBA-15 template stabilizes the Ni₂P particles, preventing sintering after the high reduction temperature and shaping their elongated morphology. Moreover, HT-Ni₂P catalyst shows an improvement in the textural properties with a significantly higher surface area than the reference sample synthesized in the absence of template. X-ray diffraction revealed that the only crystalline phase present in this material was Ni₂P. On the other hand, transmission electron microscopy shows that the catalyst is mainly constituted by agglomerates of nanorods. Through EDX microanalysis the efficient removal of silicon was confirmed. Under hydrotreating conditions, nanorods of Ni₂P show a fourfold enhancement in the conversion of methyl oleate with respect to conventional Ni₂P synthesized in absence of hard template. Nevertheless, when these data are normalized to surface area, the specific activity of HT-Ni₂P nanorods is significantly lower than that of the conventionally prepared sample. Differences in selectivity were also observed as Ni₂P nanorods favored the decarboxylation reaction leading to a higher yield of n-heptadecane.     

Comparative study between large-scale and small-scale electrochemical potentiokinetic reactivation performed on AISI 316L austenitic stainless steel

This work optimizes the application of electrochemical potentiokinetic reactivation (EPR) to assess the degree of sensitization (DOS) of AISI 316L and compares the large-scale and small-scale EPR with the aim of improving the study of the different zones of AISI 316L welded joints by using an electrochemical minicell. The optimized EPR allows to discriminate better than the standardized EPR among different DOS. Small-scale EPR shows greater sensitivity to assess the DOS than large-scale EPR: (i) at lower deformation levels; (ii) for shorter sensitization times; (iii) when localized microstructural regeneration is caused by the combined effect of deformation and subsequent sensitization.     

Strawberries from integrated pest management and organic farming: Phenolic composition and antioxidant properties

Consumer awareness, pesticide and fertilizer contaminations and environmental concerns have resulted in significant demand for organically grown farm produce. Consumption of berries has become popular among health-conscious consumers due to the high levels of valuable antioxidants, such as anthocyanins and other phenolic compounds. The present study evaluated the influence that organic farming (OF) and integrated pest management (IPM) practise exert on the total phenolic content in 22 strawberry samples from four varieties. Postharvest performance of OF and IPM strawberries grown in the same area in the centre of Portugal and harvested at the same maturity stage were compared. Chemical profiles (phenolic compounds) were determined with the aid of HPLC-DAD/MS. Total phenolic content was higher for OF strawberry extracts. This study showed that the main differences in bioactive phytochemicals between organically and IPM grown strawberries concerned their anthocyanin levels. Organically grown strawberries were significantly higher in antioxidant activity than were the IPM strawberries, as measured by DPPH and FRAP assays.     

The evaluation of a social adaptive website for cultural events

In this paper, we present an evaluation of a social adaptive website in the domain of cultural events, iCITY DSA, which provides information about cultural resources and events that promote the cultural heritage in the city of Turin. Using this evaluation, our objective was to investigate the actual usage of a social adaptive website, in an effort to discover the real behavior of users, the unforeseen correlations among user actions and the consequent interactive behavior, the accuracy of both system and social recommendations and their impact on the users themselves, and the role of tagging in the user modeling process. The major contributions of the paper are manifold: insights into user interactions with social adaptive systems; guidelines for future designs; evaluation of the tagging activity and tag meanings in relation to the application domain and thus their impact on the representation of the user model; and a demonstration of how a combination and interplay of evaluation methodologies (e.g., quantitative and qualitative) can enhance our comprehension of evaluation data.     

Broccoli leaf powder as an attractive by-product ingredient: effect on batter behaviour,technological properties and sensory quality of gluten-free mini sponge cake

Broccoli by-products, in particular leaves, are rich sources of nutritional and bioactive components thus could constitute a valuable food additive. Although an upsurge in quantity of gluten-free products is observed further studies are required on improvement of their nutritional quality and palatability. This study aimed to investigate the influence of broccoli leaf powder (BLP) on dough behaviour, and technological characteristics and sensory quality of gluten-free mini sponge cake (GFS). Broccoli leaf powder replaced an equivalent amount (2.5%, 5%, 7.5%; w/w) of corn and potato starches in GFS formulation. Applied BLP increased the instrumental firmness of GFS but sensorial attributes (elasticity, crustiness, mastication and adhesiveness) were similar to the control. All broccoli GFS were vividly green, had small size pores properly distributed. Among them, sample with 2.5% BLP was distinguished for its desirable sensory quality, despite a slightly perceived cabbage aroma and taste. Moderate amount of BLP allows to preserve a good quality GFS improving its attractiveness and palatability.     

Betulinic Acid in Complex with a Gamma-Cyclodextrin Derivative Decreases Proliferation and in Vivo Tumor Development of Non-Metastatic and Metastatic B164A5 Cells

Betulinic acid, a very promising anti-melanoma agent, has very low water solubility that causes low bioavailability. To overcome this inconvenience, a highly water-soluble cyclodextrin was used (octakis-[6-deoxy-6-(2-sulfanyl ethanesulfonic acid)]-γ-cyclodextrin). The complex was physico-chemically analyzed using differential scanning calorimetry (DSC), X-ray and scanning electron microscopy (SEM) methods and then in vitro tested for its antiproliferative activity by the MTT assay and by cell cycle analysis. Finally, the complex was tested in vivo using an animal model of murine melanoma developed in C57BL/6J mice, where it caused a reduction in tumor volume and weight. The study revealed the beneficial influence of betulinic acid inclusion into the cyclodextrin in terms of antiproliferative activity and in vivo tumor development.     

Solid lubricant behavior of MoS2 and WSe2-based nanocomposite coatings

Abstract

Tribological coatings made of MoS₂ and WSe₂ phases and their corresponding combinations with tungsten carbide (WC) were prepared by non-reactive magnetron sputtering of individual targets of similar composition. A comparative tribological analysis of these multiphase coatings was done in both ambient air (30–40% relative humidity, RH) and dry nitrogen (RH<7%) environments using the same tribometer and testing conditions. A nanostructural study using advanced transmission electron microscopy of the initial coatings and examination of the counterfaces after the friction test using different analytical tools helped to elucidate what governs the tribological behavior for each type of environment. This allowed conclusions to be made about the influence of the coating microstructure and composition on the tribological response. The best performance obtained with a WSe_x film (specific wear rate of 2 × 10^?8 mm³ N^–1m^–1 and a friction coefficient of 0.03–0.05) was compared with that of the well-established MoS₂ lubricant material.     

An Integrated System for UAV Control Using a Neural Network Implemented in a Prototyping Board

Modern aerospace vehicles are expected to have non-conventional flight envelopes and then, in order to operate in uncertain environments, they must guarantee a high level of robustness and adaptability. A Neural Network (NN) controller, with real-time learning capability, can be used in applications with manned or unmanned aerial vehicles. In this paper a novel real-time control system, based on a NN model, in order to control the trajectories of a hexacopter is proposed. The proposed NN is optimized by the analytical calculation of the embedding parameters. The paper shows a performance evaluation, through a real experimental testbed, of the proposed approach in terms of error measures and computation of the angular velocities of the hexacopter.     

Fermented milk obtained with kefir grains as an ingredient in breadmaking

The objectives of this research were to study the effect of the addition of lyophilised kefir milk to premixes for household production of bread and evaluate the quality attributes of them. Four lyophilised samples were obtained from the followings: skim milk, acidified skim milk, fermented skim milk and neutralised fermented skim milk. Breads were prepared with commercial wheat flour, lyophilised milk samples and yeast through a straight dough process. Quality was assessed through loaf volume, crumb porosity and moisture, crumb texture and crust colour. Changes in texture and starch recrystallisation by X‐ray diffractometry were determined after 1 and 3 days of storage at room temperature. Breads with acidified milks showed the highest specific volumes and crumbs with the best texture properties. Crystallinity in bread with fermented milks was higher than for skim milk sample. This would indicate that there would be a certain effect of the type of milk processing on the promotion of starch retrogradation.