Quality and safety of maize (Zea mays L.) from Rondônia state storage units,Northern Brazil

The quality and safety of maize (Zea mays L.) from different grain storage units (GSUs), located in the main producing region of Rondônia State, Northern Brazil, were evaluated. Maize grains (n = 76) stored in four GSUs were collected from July to November 2014 and evaluated for grain damages, humidity, fungi and fumonisins (FBs) content. The climate conditions data were also obtained from plant growing to storage periods. Regarding the moisture content and water activity (a_w), these varied from 10.0% to 16.1% and 0.5 to 0.8, respectively. As expected, fungi spores were present in 94.8% of the samples, prevailing Fusarium genera, with a fungi colony maximum of 2.2 × 10⁴ CFU g^?1. Regarding FBs, 60.5% of the samples were contaminated, below Brazilian and United States maximum limits, but 9.2% had levels higher than the European legislation.     

Corticosteroids in liver and urine in Sicilian cattle by a LC-MS/MS method

The presence of corticosteroid residues was assessed in urine and liver samples from livestock of Sicily. A total of 630 bovine samples were collected from farms and slaughterhouses. The samples were analysed using solid-phase extraction (SPE) coupled with ultra-performance liquid chromatography tandem mass spectrometry (UHPLC–MS/MS). All the corticosteroids found were under the maximum residue limit imposed by Commission Regulation (EC) 37/2010. About 4% of liver samples showed dexamethasone levels above the limit of detection (LOD), with a mean of 1.5 ± 0.2 µg kg^?1. Betamethasone was found only in seven liver samples, with a mean of 1.6 ± 0.1 µg kg^?1. Furthermore, prednisolone and prednisone were found only in urine and liver samples from slaughterhouse, probably related to the high rate of stress for bovines. These results suggest good control practices adopted by Sicilian farms, able to ensure the quality of food products.     

Alicyclobacillus acidoterrestris spores as a target for Cupuaçu (Theobroma grandiflorum) nectar thermal processing: kinetic parameters and experimental methods

The kinetic parameters of thermal inactivation of a spore former, Alicyclobacillus acidoterrestris, in a tropical fruit nectar [25% of Cupua?u (Theobroma grandiflorum) pulp and 15% sugar] were determined by the isothermal method (IM), under batch heating, and by the paired equivalent isothermal exposures (PEIE) method, under non-isothermal continuous conditions. The isothermal experiments were repeated three times, every 4 months, with the same spore suspension kept frozen between experiments. The aging of spores, under frozen storage, seemed to produce a notorious increase in the z-value from experiment to experiment: Experiment 1 (z = 7.8 +/- 2.6 degrees C, D(95 degrees C) = 5.29 +/- 0.96 min), Experiment 2 (z = 22 +/- 5 degrees C, D(95 degrees C) = 5.99 +/- 0.63 min), and Experiment 3 (z =29 +/- 10 degrees C, D(95 degrees C) = 3.82 +/- 0.48 min). The evaluation of the kinetic parameters by the PEIE method was carried out in parallel with Experiment 3, with the same aged spores, and the results (z = 31 +/- 6 degrees C, D(95 degrees C) = 5.5 +/- 1.2 min) were close to the ones obtained in this experiment. From this work, it seems that the PEIE method can also be applied to evaluate the reduction parameters of a spore-forming microorganism, and in a more realistic way, since the continuous system eliminates the errors caused by come-up and cool-down times (CUT and CDT) that are unavoidable in isothermal experiments. Therefore, when designing a thermal process for a continuous system, the PEIE method should be used, or the chances are that the process would be underdesigned, risking that the desired level of spore inactivation would not be achieved. An optimization of the thermal processing conditions was next performed for Cupua?u nectar, considering a 5D reduction in A. acidoterrestris spores. If a pasteurization process is considered, the conditions that ensure safety (9 min at 98 degrees C) only allow a 55% retention of ascorbic acid (AA). If sterilization is considered, 8 s at 115 degrees C will ensure a safe product and retain 98.5% of the original ascorbic acid. Therefore, if A. acidoterrestris is considered as the target microorganism, the nectar should undergo an aseptic high temperature short time principle (HTST) process to achieve a 5D reduction in this acidophilus spore former. However, if the hot-fill-and-hold pasteurization process is preferred, the product should be fortified with ascorbic acid.     

Effect of high pressure processing on wheat dough and bread characteristics

Microbial, physical and structural changes in high pressured wheat dough were studied as a function of pressure level (50-250 MPa) and holding time (1-4 min). Thereafter, selected conditions of high hydrostatic processing (HPP) were applied to bread dough and the technological quality of the obtained breads was studied. The effect of HPP on wheat dough was investigated by determining microbial population (total aerobic mesophilic bacteria, moulds and yeasts), color and mechanical and texture surface related dough parameters (cohesiveness, adhesiveness, hardness and stickiness). HPP reduced the endogenous microbial population of wheat dough from 10⁴ colony forming units/g (CFU) to levels of 10² CFU. HPP treatment significantly (P < 0.05) increased dough hardness and adhesiveness, whereas treatment time reduced its stickiness. Scanning electron micrographs suggested that proteins were affected when subjected to pressure levels higher than 50 MPa, but starch modification required higher pressure levels. HPP treated yeasted doughs led to wheat breads with different appearance and technological characteristics; crumb acquired brownish color and heterogeneous cell gas distribution with increased hardness due to new crumb structure. This study suggests that high hydrostatic processing in the range 50-200 MPa could be an alternative technique for obtaining novel textured cereal based products.     

Cross-linked soy protein as material for biodegradable films: Synthesis, characterization and biodegradation

The modification of soy protein isolate (SPI) with different amounts of a naturally occurring cross-linking agent (genipin, Gen) and glycerol used as plasticizer was carried out in this work. The films yielded were cast from heated and alkaline aqueous solution of SPI, glycerol and Gen and then dried in an oven. Total soluble matter, water vapor permeability and mechanical properties were improved by adding small amounts of Gen. These properties were not significantly affected (P ? 0.05) by additions exceeding 2.5% (w/w of SPI). The opacity and cross-linking degree were linearly increased with the addition of Gen, whereas the swelling ratios in water were decreased. All the films were submitted to degradation under indoor soil burial conditions and the weight loss of the films was measured at different times. This study revealed that the film biodegradation time can be controlled or modified from at least 14 to 33 days. The tests performed showed the potential of Gen to improve the SPI film properties, in which the possibility of employing such new films as biodegradable food packaging was raised.