Different Directions of Switching of Chromium Oxide Thin Films

We have investigated the switching behavior of as-deposited CrO _x and post-annealed CrO _y films by use of a variety of electrodes (top electrode Ag, Ti; bottom electrode Pt, fluorine tin oxide (FTO)). Resistance switching is highly dependent on electrode material and post-annealing treatment. Among Pt devices, I–V hysteresis was observed for the Ag/CrO _x /Pt device only; no resistance switching was observed for Ag/CrO _y /Pt, Ti/CrO _x /Pt, and Ti/CrO _y /Pt devices. Among FTO devices, I–V hysteresis was observed for the Ag/CrO _x /FTO device whereas I–V hysteresis with the opposite switching direction was observed for Ag/CrO _y /FTO, Ti/CrO _x /FTO, and Ti/CrO _y /FTO devices. The direction of switching depends not only on electrode material but also on post-annealing treatment, which affects the density of grain boundaries. Thus, the density of grain boundaries determines the type of charge carrier involved in the switching process. For as-deposited CrO _x films with a high density of grain boundaries Ag filament paths mediated by electrochemical redox reaction were observed, irrespective of bottom electrode material (Pt or FTO). Post-annealed CrO _y films with a low density of grain boundaries suppressed electrochemical redox reaction in the Ag/CrO _y /Pt device but promoted short-range movement of O^2? ions through the bottom interface, resulting in resistance switching in the Ag/CrO _y /FTO device. Electrochemical redox reaction-controlled resistance switching occurred solely in oxides with a high density of grain boundaries or dislocations.     

Non‐planar mixed‐mode growth of initially straight‐fronted surface cracks,in cylindrical bars under tension,torsion and bending,using the symmetric Galerkin boundary element method‐finite element method alternating method

In this paper, the stress intensity factor (SIF) variations along an arbitrarily developing crack front, the non‐planar fatigue‐crack growth patterns, and the fatigue life of a round bar with an initially straight‐fronted surface crack, are studied by employing the 3D symmetric Galerkin boundary element method‐finite element method (SGBEM‐FEM) alternating method. Different loading cases, involving tension, bending and torsion of the bar, with different initial crack depths and different stress ratios in fatigue, are considered. By using the SGBEM‐FEM alternating method, the SIF variations along the evolving crack front are computed; the fatigue growth rates and directions of the non‐planar growths of the crack surface are predicted; the evolving fatigue‐crack growth patterns are simulated, and thus, the fatigue life estimations of the cracked round bar are made. The accuracy and reliability of the SGBEM‐FEM alternating method are verified by comparing the presently computed results to the empirical solutions of SIFs, as well as experimental data of fatigue crack growth, available in the open literature. It is shown that the current approach gives very accurate solutions of SIFs and simulations of fatigue crack growth during the entire crack propagation, with very little computational burden and human–labour cost. The characteristics of fatigue growth patterns of initially simple‐shaped cracks in the cylindrical bar under different Modes I, III and mixed‐mode types of loads are also discussed in detail.     

Magnetic Fe(2)MO(4) (M:Fe, Mn) activated carbons: fabrication, characterization and heterogeneous Fenton oxidation of methyl orange

We present a simple and efficient method for the fabrication of magnetic Fe(2)MO(4) (M:Fe and Mn) activated carbons (Fe(2)MO(4)/AC-H, M:Fe and Mn) by impregnating the activated carbon with simultaneous magnetic precursor and carbon modifying agent followed by calcination. The obtained samples were characterized by nitrogen adsorption isotherms, X-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM), and the catalytic activity in heterogeneous Fenton oxidation of methyl orange (MO) was evaluated. The resulting Fe(2)MnO(4)/AC-H showed higher catalytic activity in the methyl orange oxidation than Fe(3)O(4)/AC-H. The effect of operational parameters (pH, catalyst loading H(2)O(2) dosage and initial MO concentration) on degradation performance of the oxidation process was investigated. Stability and reusability of selected catalyst were also tested.     

Efficacy of a novel sanitizer composed of lactic acid and peroxyacetic acid against single strains of nonpathogenic Escherichia coli K-12, Listeria innocua, and Lactobacillus plantarum in aqueous solution and on surfaces of romaine lettuce and spinach

A novel sanitizer composed of lactic acid and peroxyacetic acid (LA-PAA) was developed as an alternative to chlorinated water (CW) for fresh produce processing. Single strains of Lactobacillus plantarum, nonpathogenic Escherichia coli K-12, and Listeria innocua were used to demonstrate the microbial efficacy of LA-PAA. LA-PAA achieved a >7.8-log reduction of L. innocua and L. plantarum suspended in water at 4°C for 20 s, and LA, PAA, and CW achieved reductions of 0.4, 4.8, and 2.7 log, respectively. LA-PAA, when compared with LA, PAA, and CW, enhanced the reduction of L. innocua attached to romaine leaves by >2.2 log, and improved the removal of E. coli attached to spinach leaves by >2.4 log. The exponential improvement in the microbial efficacy of LA-PAA showed synergism between LA and PAA. LA-PAA microbial efficacy was inversely proportional to pH value and directly correlated with residence time and concentration. Despite an improvement in microbial reduction through the addition of surfactant to LA-PAA, the usage of surfactant in washing fresh produce was impeded by excessive foaming during actual processing. Effects of organic matter on the performance of LA-PAA were minimal. External sensory evaluations showed that LA-PAA had no negative effects on the quality of lettuce and tender leaves. Temperature-abuse studies demonstrated that LA-PAA reduced decay by ～50% when compared with CW. Overall, these results support the premise that LA-PAA has significant potential to be an alternative to CW for fresh produce processing.     

The influences of technological conditions and Au cluster islands on morphology of Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires grown by VLS method on GaAs substrate

The synthesis of semiconductor nanowires is more and more interested to the applications for building blocks of the innovative nano-sized devices and circuits, but the research and fabrication of these nanowires are also holding a number of difficulties and challenges. Among many different kinds of semiconductor nanowires, Ga₂O₃ is increasingly grown for many promising applications in nano-device production, namely nanowire LED and Laser. So far there are many synthesizing methods of semiconductor nanowires, among them the vapor–liquid–solid (VLS) method is simple, cheap and popular. However, when we use the VLS method for nanowire growth, various technological problems exist. This paper aims at investigating some influences of the growth technological conditions and Au metal catalyst on the morphology of Ga₂O₃ nanowire grown by VLS on GaAs substrate. The main considering factors include the different growing temperatures and times, the effects of Au diffusion, Au droplets formation, Au cluster islands formation, and gas volume of the growing tube/ampoule at the 10⁻¹ torr low air pressure. The obtained experimental results regarding the structural properties of nanowires under these effects investigated by scanning electron microscopy, field emission scanning electron microscopy, high angle annular dark field and bright field, scanning transmission electron microscopy, energy-dispersive X-ray techniques, and focus ion beam are presented and discussed.     

Antibiotic contamination and occurrence of antibiotic-resistant bacteria in aquatic environments of northern Vietnam

The ubiquitous application and release of antibiotics to the environment can result in bacterial antibiotic resistance, which in turn can be a serious risk to humans and other animals. Southeast Asian countries commonly apply an integrated recycling farm system called VAC (Vegetable, Aquaculture and Caged animal). In the VAC environment, antibiotics are released from animal and human origins, which would cause antibiotic-resistant bacteria (ARB). This study evaluated occurrence of ARB in the VAC environment in northern Vietnam, with quantitative analysis of antibiotic pollution. We found that sulfonamides were commonly detected at all sites. In dry season, while sulfamethazine was a major contaminant in pig farm pond (475-6662 ng/l) and less common in city canal and aquaculture sites, sulfamethoxazole was a major one in city canal (612-4330 ng/l). Erythromycin (154-2246 ng/l) and clarithromycin (2.8-778 ng/ml) were the common macrolides in city canal, but very low concentrations in pig farm pond and aquaculture sites. High frequencies of sulfamethoxazole-resistant bacteria (2.14-94.44%) were found whereas the occurrence rates of erythromycin-resistant bacteria were lower (< 0.01-38.8%). A positive correlation was found between sulfamethoxazole concentration and occurrence of sulfamethoxazole-resistant bacteria in dry season. The sulfamethoxazole-resistant isolates were found to belong to 25 genera. Acinetobacter and Aeromonas were the major genera. Twenty three of 25 genera contained sul genes. This study showed specific contamination patterns in city and VAC environments and concluded that ARB occurred not only within contaminated sites but also those less contaminated. Various species can obtain resistance in VAC environment, which would be reservoir of drug resistance genes. Occurrence of ARB is suggested to relate with rainfall condition and horizontal gene transfer in diverse microbial community.     

Information and Service Integration Based on Agent-Oriented Ubiquitous Computing

Ubiquitous computing for information and service integration is currently at crucial point in its evolution, marked by the increasing developments of agent-based ubiquitous computing systems for the information and service integration. Some major features of ubiquitous computing systems (UCSs) consist of heterogeneity, decentralization, nondeterminism and dynamicity. Hence, agent-based ubiquitous computing (AUC) is a form of distributed computing by which computational processes are executed concurrently by assigning each computational process to one of agents on a UCS. The overarching goal of AUC is to support the seamless integration of information and services. Meeting this grand challenge of AUC requires that agent-orientation not tackled before is necessarily featured. To this end, taking advantage of the categorical structures we establish, in this paper, a firm formal development for featuring agent-orientation of ubiquitous computing. In other words, all of these are to formalize the AUC for information and service integration.