Effects of rilmenidine on rats made insulin resistant and hypertensive by a high fructose diet

This study was aimed to determine the effects of rilmenidine, an hypertensive drug, in an animal model of hypertension associated with insulin resistance, i.e. rats fed on a high fructose diet. Wistar rats were fed during four weeks either on a standard diet (S) or on a high fructose diet (F, 34.5% de fructose). In half of the F groups, rilmenidine (1 mg/kg/day) was added to the drinking water during the two last weeks of the diet (FR). Arterial blood pressure as well as insulin efficiency were determined at the end of the four weeks. Body weight gain was higher in F than in S rats (66 +/- 8 g versus 45 +/- 8 g; p < 0.05), this was prevented by rilmenidine treatment (32 +/- 2 g). Arterial systolic blood pressure was increased in F rats (162 +/- 2 vs 155 +/- 2 mmHg; p < 0.05), rilmenidine brought this value back to normal (149 +/- 3 mmHg). During the euglycemic hyperinsulinemic clamp, glucose utilization was lower (10 +/- 1 vs 14 +/- 1.5 mg/min/kg; p < 0.05) and hepatic glucose production higher (1 +/- 0.01 vs 0 mg/min/kg; p < 0.01) in F than in S rats. These changes in insulin action were totally abolished by rilmenidine. These data demonstrate that rilmenidine can ameliorate the deleterious effects of a high fructose diet, i.e. weight gain, hypertension and resistance to the effects of insulin Rilmenidine could represent a potential therapeutic agent for the treatment of hypertension associated with metabolic disorders such as syndrom X and obesity.     

Hybrid Nanodielectrics for Low‐Voltage Organic Electronics

Nanoscale hybrid dielectrics composed of an ultra‐thin polymeric low‐κ bottom layer and an ultra‐thin high‐κ oxide top layer, with high dielectric strength and capacitances up to 0.25 μFcm^?2, compatible with low‐voltage, low‐power, organic electronic circuits are demonstrated. An efficient and reliable fabrication process, with 100% yield achieved on lab‐scale arrays, is demonstrated by means of pulsed laser deposition (PLD) for the fast growth of the oxide layer. With this strategy, high capacitance top gate (TG), n‐type and p‐type organic field effect transistors (OFETs) with high mobility, low leakage currents, and low subthreshold slopes are realized and employed in complementary‐like inverters, exhibiting ideal switching for supply voltages as low as 2 V. Importantly, the hybrid double‐layer allows for a neat decoupling between the need for a high capacitance, guaranteed by the nanoscale thickness of the double layer, and for an optimized semiconductor–dielectric interface, a crucial point in enabling high mobility OFETs, thanks to the low‐κ polymeric dielectric layer in direct contact with the polymer semiconductor. It is shown that such decoupling can be achieved already with a polymer dielectric as thin as 10 nm when the top oxide is deposited by PLD. This paves the way for a very versatile implementation of the proposed approach for the scaling of the operating voltages of TG OFETs with very low level of dielectric leakage currents to the fabrication of low‐voltage organic electronics with drastically reduced power consumption.     

Surface Characterization of Vulcanized Rubber Treated with Sulfuric Acid and its Adhesion to Polyurethane Adhesive

Modifications produced on a vulcanized styrene –butadiene rubber surface by treatment with sulfuric acid were studied and several experimental variables were considered.

The treatment of R1 rubber with sulfuric acid produced a noticeable decrease in contact angle which was mainly ascribed to an increase in surface energy due to the formation of sulfonic acid moieties and C?O bonds, and the removal of zinc stearate. The rubber surface swelled and became brittle as a result of the treatment, and when flexed microcracks were created. A rubber surface layer modification was produced with a consequent decrease in tensile strength and elongation-at-break values. The treatment enhanced the T-peel strength of R1 rubber/polyurethane adhesive joints and the locus of failure was cohesive in the rubber.

The optimum immersion time in H₂SO₄ solution was less than 1 min., and the reaction time in air was not found to be critical; the neutralization with ammonium hydroxide and the high concentration of the sulfuric acid (95 wt%) were essential to produce adequate effectiveness of the treatment.     

Study,Mechanical Characterization and Mathematical Modeling of Compatible SEBS Blends for Industrial Applications in Orthopedics and Childcare

In this work, a system of compatible blends based on two commercial grades of a thermoplastic elastomer, styrene-ethylene/butylene-styrene (SEBS), with extreme Shore A hardness values (5 and 90), was studied in order to obtain a range of different performance blends for orthopedic and childcare applications, where usually liquid silicone rubber is used. Mechanical properties of different blends were obtained, and Equivalent Box Model (EBM) was used for the prediction of the mechanical behavior. The results show good agreement between the theoretical model and experimental data of new blends of SEBS.     

DRYING CHARACTERISTICS OF THE HAZELNUT

Abstract

Equilibrium moisture content isotherms for Spanish hazelnut (Corylus avellana L.) at different temperatures (30°C-80°C) were determined using static gravimetric method. Thin layer drying experiments were done with forced air circulation and were conducted with different operating conditions to determine the drying characteristics of hazelnuts. The effect of air temperature (30°C-70°C), air velocity (0.5 m/s - 2 m/s) and drying bed loading density (50 kg/m² - 150 kg/m²) on drying of unshelled and shelled hazelnuts was studied. Six mathematical models were used to fit the experimental equilibrium moisture content data, from which the G.A.B. model was found to give the best fit. Diffusion coefficients were determined by fitting experimental thin-layer drying curves to the Fick's diffusion model. Variation of the effective diffusion coefficient with temperature was of the Arrhenius type. The Page equation was found to describe adequately the thin layer drying of hazelnut. Page equation drying parameters k and n were correlated with air temperature and relative humidity.     

Process behavior of compatible polymer blends

It is a common industrial practice to blend virgin polymer with the same polymer recycled from scrap plastic that, in general, has not undergone relevant degradation. In this article, the influence that incorporating recycled material has on injection processes, especially on the rheological behavior of the material was studied. With this aim in mind, a mixture of two materials with the same nature or composition and similar viscosity was used, which is the system that is most commonly seen in industry. The mixture studied is composed of virgin PP (polypropylene) typically found in injection processes, and recycled copolymer PP from scrap plastic. A complete characterization of the materials and applied existing models was carried out to predict the mechanical behavior of the mixtures. A model to predict the behavior of the mixtures during processing, based on the rheological characteristics of the materials used was developed. This predictive model has been experimentally validated using filling tests in injection molding machines, as well as by specific simulation software. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012