Maximum Likelihood-Based Direction-of-Arrival Estimator for Discrete Sources

This paper addresses the problem of direction-of-arrival (DOA) parameter estimation in array processing when the signals are inherently discrete, which is the case mainly in the digital communication context. Based on the particular structure of the signal space in the data model, a maximum likelihood-based approach is introduced. The strategy consists in transforming the parameter estimation problem into a decision task. It is shown through numerical simulations that the proposed solution closely follows the performance limit given by the Cramér–Rao bound. Some important features of the technique are as follows: (i) it is capable of handling any number of sources, provided that the number of sensors is greater than or equal to two and the number of snapshots is sufficiently greater than the cardinality of the signal space; (ii) the estimation quality is not affected by the angle and phase separation; and (iii) it offers the possibility to deal with uncalibrated arrays.     

Dechlorination of polychlorinated biphenyls in industrial transformer oil by radiolytic and photolytic methods

Used electrical transformer oils containing low or high concentrations of polychlorinated biphenyls (PCBs) were treated using electron, gamma, and ultraviolet radiation, and the conditions for complete dechlorination were developed. Dechlorination was determined by analysis of the inorganic chloride formed and the concentrations of remaining PCBs. Transformer oil containing approximately 95 microg g(-1) PCB (approximately 3.5 mmol L(-1) Cl) is completely dechlorinated by irradiation with 600 kGy after the addition of 10% triethylamine (TEA). Transformer oil containing >800,000 microg g(-1) PCB (17.7 mol L(-1) Cl) requires an additional solvent to prevent solidification. When this oil is diluted with 2-propanol (2-PrOH) and TEA (v/v/v, 1/79/20), complete dechlorination is achieved with a dose of 2500 kGy. Ultraviolet photolysis of the same oil/2-PrOH/TEA solutions led to 90% dechlorination after exposure for 120 h in our experimental setup. Such yields were obtained by radiolysis with a dose of 2000 kGy (300 h in our Gammacell). Replacing TEA with KOH in 2-PrOH solutions greatly increases the yield of dechlorination in both the radiolytic and the photolytic experiments, demonstrating that a chain reaction plays a role in both of these treatment methods and suggesting that both methods deserve further consideration for large-scale application.     

Colostrum source and passive immunity transfer in dairy bull calves

Colostrum is essential for good neonate health; however, it is not known whether different calves absorb the nutrients from colostrum equally well. In this study, the absorption of protein, IgG, and γ-glutamyl transferase was compared in newborn dairy bull calves for 1 wk after feeding colostrum from different sources. Thirty-five Holstein-Friesian bull calves were randomly allocated into 3 groups and fed colostrum within 4 h after birth. Group A calves (n = 12) were bottle fed colostrum from their own dam for 3 d. Colostrum from these group A cows was also used as foster cow colostrum for the group B calves (n = 12), such that each group A and B calf pair received identical colostrum from each milking of the respective group A dam (10% of birth weight per day). The group C calves (n = 11) were fed 1 bottle (2 L) of pooled colostrum and transition milk (referred to as pooled colostrum), as was the standard practice on the dairy farm. The pooled colostrum was collected from the other dairy cows on the farm 0 to 4 d postpartum and stored at 4°C for less than 12 h. Blood was sampled from calves before the first feeding and at 1, 2, 3, and 7 d after birth. Levels of total solids, total protein, and IgG were higher in the dam colostrum than in the pooled colostrum. At birth, there were no differences between the calf groups for any measurements, and all calves had very low IgG levels. After receiving colostrum, the glucose, plasma γ-glutamyl transferase, serum total protein, and IgG concentrations increased significantly in all calves. There were no differences in any blood measurements at any time point between the pairs of group A and group B calves that received colostrum from the same cow except for the IgG concentration 2 d after birth. However, the group A calves had a higher total serum protein level and IgG concentration than the group C calves for all the time points after the first feeding. The group B calves had a higher IgG concentration than the group C calves on d 1, 2, and 7 after birth. Compared with groups A and B, there was no difference in the proportion of calves in group C that failed to have passive immunity transferred adequately based on the IgG threshold (<10 g/L). Thus, the calves receiving identical colostrum from the same cow had the same levels of IgG, and even the pooled colostrum provided sufficient transfer of IgG as the calves were fed within 4 h after birth.     

Removal of heavy metals from aqueous systems with thiol functionalized superparamagnetic nanoparticles

We have shown that superparamagnetic iron oxide (Fe3O4) nanoparticles with a surface functionalization of dimercaptosuccinic acid (DMSA) are an effective sorbent material for toxic soft metals such as Hg, Ag, Pb, Cd, and Tl, which effectively bind to the DMSA ligands and for As, which binds to the iron oxide lattices. The nanoparticles are highly dispersible and stable in solutions, have a large surface area (114 m2/g), and have a high functional group content (1.8 mmol thiols/g). They are attracted to a magnetic field and can be separated from solution within a minute with a 1.2 T magnet. The chemical affinity, capacity, kinetics, and stability of the magnetic nanoparticles were compared to those of conventional resin based sorbents (GT-73), activated carbon, and nanoporous silica (SAMMS) of similar surface chemistries in river water, groundwater, seawater, and human blood and plasma. DMSA-Fe3O4 had a capacity of 227 mg of Hg/g, a 30-fold larger value than GT-73. The nanoparticles removed 99 wt% of 1 mg/L Pb within a minute, while it took over 10 and 120 min for Chelex-100 and GT-73 to remove 96% of Pb.     

Effects of high-pressure processing on the safety, quality, and shelf life of ready-to-eat meats

Ready-to-eat (RTE) meats (low-fat pastrami, Strassburg beef, export sausage, and Cajun beef) were pressure treated at 600 MPa, 20 degrees C, for 180 s to evaluate the feasibility of using high-pressure processing (HPP) for the safe shelf-life extension of these products. After processing, samples were stored at 4 degrees C for 98 days during which time microbiological enumeration and enrichments were performed. Additionally, sensory analyses were undertaken to determine consumer acceptability and purchase intent over the duration of storage. Counts of aerobic and anaerobic mesophiles, lactic acid bacteria, Listeria spp., staphylococci, Brochothrix thermosphacta, coliforms, and yeasts and molds revealed that there were undetectable or low levels for all types of microorganisms throughout storage. Comparison of consumer hedonic ratings for unprocessed and processed meats revealed no difference in consumer acceptability, and no deterioration in the sensory quality was evident for any of the products tested during the study. Additionally, inoculated pack studies were conducted to determine if HPP could be used as a postlethality treatment to reduce or eliminate Listeria monocytogenes and thus assess the potential use of HPP in a hazard analysis critical control point plan for production of RTE meats. Inoculated samples (initial level of 10(4) CFU/g) were pressure treated (600 MPa, 20 degrees C, for 180 s) and stored at 4 degrees C, and survival of L. monocytogenes was monitored for 91 days. L. monocytogenes was not detected by plating methods until day 91, but selective enrichments showed sporadic recovery in three of the four products examined. The results show that HPP at 600 MPa, 20 degrees C, for 180 s can extend the refrigerated shelf life of RTE meats and reduce L. monocytogenes numbers by more than 4 log CFU/g in inoculated product.     

Real-time PCR detection of the thermostable direct hemolysin and thermolabile hemolysin genes in a Vibrio parahaemolyticus cultured from mussels and mussel homogenate associated with a foodborne outbreak

Molecular methods have become vital epidemiological tools in the detection and characterization of bacteria associated with a foodborne outbreak. We used both culture and real-time PCR to detect a Vibrio parahaemolyticus isolate associated with a foodborne outbreak. The outbreak occurred in July 2002 in Polk County, Florida, and originated at a Chinese buffet, with one person being hospitalized. The hospital isolated V. parahaemolyticus from the patient but destroyed the sample after diagnosis. From an onsite visit of the restaurant, food samples that possibly contributed to the outbreak were collected and sent to the Florida Department of Health, Tampa Branch Laboratory. Crab legs, crabsticks, and mussel samples were homogenized and incubated according to the Food and Drug Administration Bacteriological Analytical Manual culture protocol. Three sets of primers and a TaqMan probe were designed to target the tdh, trh, and tlh genes and used for real-time PCR. This study was successful in isolating V. parahaemolyticus from a mussel sample and detecting two of its genes (tdh and tlh) in food and pure culture by real-time PCR.     

Mycorrhizal colonization and grain Cd concentration of field‐grown durum wheat in response to tillage,preceding crop and phosphorus fertilization

BACKGROUND: A 3‐year field trial was conducted to investigate the effect of agricultural management practices including tillage, preceding crop and phosphate fertilization on root colonization by arbuscular mycorrhizal (AM) fungi and grain cadmium (Cd) concentration of durum wheat (Triticum turgidum L.). The relationship between grain Cd and soil and plant variables was explored to determine the primary factors affecting grain Cd concentration. RESULTS: Mycorrhizal colonization of the roots was reduced by conventional tillage or when the preceding crop was canola (Brassica napus L.), compared to minimum tillage or when the preceding crop was flax (Linum usitatissimum L.). In contrast, grain Cd was not consistently affected by any treatment. Grain Cd was generally below the maximum permissible concentration (MPC) of 100 µg Cd kg^?1 proposed by WHO. Grain Cd varied substantially from year to year, and could be predicted with 70% of variance accounted for by using the model: grain Cd concentration = ? 321.9 + 44.5× ln(grain yield) + 0.26× soil DTPA‐Cd + 182.5× soil electrical conductivity (EC)? 0.98× grain Zn concentration. CONCLUSIONS: These common agricultural management practices had no effect on grain Cd concentration in durum wheat though they impacted mycorrhizal colonization of roots. Grain yield and to a lesser extent soil conditions of EC and DTPA‐Cd and grain Zn influenced grain Cd, whereas mycorrhizal colonization levels did not. Copyright © 2010 Crown in the right of Canada. Published by John Wiley & Sons, Ltd     

Effect of loading rate on the fate of mercury in littoral mesocosms

The effects of changes in atmospheric mercury (Hg) deposition on aquatic ecosystems are poorly understood. In this study, we examined the biogeochemical cycling of Hg in littoral mesocosms receiving different loading rates (7-107 microg Hg m(-2) year(-1)). We added a 202Hg-enriched preparation to differentiate the experimentally added Hg from the ambient Hg in the environment. This approach allowed us to follow the distribution and methylation of the isotopically enriched ("spike") Hg in the mesocosms. Within 3 weeks, spike Hg was distributed throughout the main environmental compartments (water, particles, periphyton, and sediments) and began to be converted to methylmercury (MeHg). Concentrations of spike total Hg and MeHg in these compartments, measured after 8 weeks, were directly proportional to loading rates. Thus, Hg(II) availability was the limiting factor for the major processes of the biogeochemical Hg cycle, including methylation. This is the first study to demonstrate a proportional response of in situ MeHg production to atmospherically relevant loading levels. On the basis of mass balances, we conclude that loading rate had no effect on the relative distribution of spike Hg among the main compartments or on the fraction of spike Hg converted to MeHg. Therefore, loading rate did not change the relative magnitude of biogeochemical pathways competing for Hg within the mesocosms. These data suggest that reductions of Hg deposition to lake surfaces would be equally effective across a broad range of deposition rates.     

Prediction of simultaneous contrast between map colors with Hunt's model of color appearance

The objective of this research was development of a quantitative model of simultaneous contrast (induction) to aid selection of sets of easily identified map colors. The model is an extension of R. W. G. Hunt's model of color appearance. Contrasts between central and proximal colors were used to adjust Hunt's lightness, relative redness-greenness, and relative yellowness-blueness measures. Human subject responses to CRT displays in an experiment were analyzed to produce a set of rules for selecting map colors. Rather than predict average perceptions for central/proximal color combinations, acknowledgment was made of the inherent variability in map readers' perceptions of color by developing generalized perception buffers that accounted for at least 90% of test subject responses. The task of selecting colors that will not be confused once they appear with numerous proximal colors on a map thus becomes a task of selecting colors that do not have buffers that overlap in color space. © 1996 John Wiley & Sons, Inc.