Crystallographic Analysis of Martensite in 0.2C-2.0Mn-1.5Si-0.6Cr Steel using EBSD

The crystallography of martensite formed in 0.2C-2.0Mn-1.5Si-0.6Cr steel was studied using the electron backscattered diffraction(EBSD) technique.The results showed that the observed orientation relationship(OR) was closer to that of Nishiyama-Wassermann(N-W) than Kurdjumov-Sachs.The martensite consisted of parallel laths forming morphological packets.Typically,there were three different lath orientations in a morphological packet consisting of three specific N-W OR variants sharing the same {111} austenite plane.A packet of martensite laths with a common {111} austenite plane was termed a crystallographic packet.Generally,the crystallographic packet size corresponded to the morphological packet size,but occasionally the morphological packet was found to consist of two or more crystallographic packets.Therefore,the crystallographic packet size appeared to be finer than the morphological packet size.The relative orientation between the variants in crystallographic packets was found to be near 60 /<110>,which explains the strong peak observed near 60 in the grain boundary misorientation distribution.Martensite also contained a high fraction of boundaries with a misorientation in the range 2.5-8.Typically these boundaries were found to be located inside the martensite laths forming sub-laths.     

Compact and localized distributed data structures

This survey concerns the role of data structures for compactly storing and representing various types of information in a localized and distributed fashion. Traditional approaches to data representation are based on global data structures, which require access to the entire structure even if the sought information involves only a small and local set of entities. In contrast, localized data representation schemes are based on breaking the information into small local pieces, or labels , selected in a way that allows one to infer information regarding a small set of entities directly from their labels, without using any additional (global) information. The survey concentrates mainly on combinatorial and algorithmic techniques, such as adjacency and distance labeling schemes and interval schemes for routing, and covers complexity results on various applications, focusing on compact localized schemes for message routing in communication networks.Received: August 2001, Accepted: May 2002, Supported in part by a grant from the Israel Science Foundation.     

Visualization of Flow Patterns in Closed Loop Flat Plate Pulsating Heat Pipe Acting as Hybrid Thermosyphons under Various Gravity Levels

A particular flat plate pulsating heat pipe (FPPHP), filled with FC72, is tested during the 62^th and 64^th ESA parabolic flight campaigns under vertical orientation. The FPPHP is made of a thin copper plate, in which a curved channel disposed with 11 U-turns is milled and closed on the top face by a transparent borosilicate plate. The particular characteristics is that the equivalent hydraulic diameter of the square channel (2.5 × 2.5 mm²) is above the working fluid capillary diameter on ground, inducing a stratification of the liquid/vapor phases under ground and hyper-gravity conditions, whatever the orientation. The energy transfer mode in such conditions is represented either by pure pool boiling inside the channels almost completely filled by the liquid phase or by an annular flow pattern inside the channels mostly filled by the refrigerant vapor. Instead, during the microgravity phases, the fluid regime naturally turns into a slug-plug flow pattern. During the transition from 1.8 g to 0 g a rapid dry-out may occur in some of the channels, followed by a similarly fast reaction of liquid plugs moving towards the evaporator from the condenser zone. Such stop-and-start motion events continue during the whole microgravity period, leading to strong temperature oscillations, but also to a still acceptable thermal performance of the device.     

Unpacking Pandora from Its Box: Deciphering the Molecular Basis of the SARS-CoV-2 Coronavirus

An enigmatic localized pneumonia escalated into a worldwide COVID-19 pandemic from Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). This review aims to consolidate the extensive biological minutiae of SARS-CoV-2 which requires decipherment. Having one of the largest RNA viral genomes, the single strand contains the genes ORF1ab, S, E, M, N and ten open reading frames. Highlighting unique features such as stem-loop formation, slippery frameshifting sequences and ribosomal mimicry, SARS-CoV-2 represents a formidable cellular invader. Hijacking the hosts translational engine, it produces two polyprotein repositories (pp1a and pp1ab), armed with self-cleavage capacity for production of sixteen non-structural proteins. Novel glycosylation sites on the spike trimer reveal unique SARS-CoV-2 features for shielding and cellular internalization. Affording complexity for superior fitness and camouflage, SARS-CoV-2 challenges diagnosis and vaccine vigilance. This review serves the scientific community seeking in-depth molecular details when designing drugs to curb transmission of this biological armament.     

The collegial role of editors and reviewers.

Prompted by D. H. Eichorn and G. R. VandenBos's (see record 1986-15484-001) article, the author describes his initiation into the journal publication process and reminds editors and reviewers that they have a collegial responsibility to develop contributing researchers. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Synthesis of nitrogen-rich B–C–N materials from melamine and boron trichloride

Nitrogen-rich B–C–N materials have been prepared by the reaction between melamine and boron trichloride at different temperatures. The composition of the materials was dependent on the synthesis and annealing temperatures: C6N10.8-11H9.4B1.5-1.7 (for products synthesized and annealed at 673 K), C6N9.3-9.4H3.8-3.9B2.2-2.5 (for those synthesized at 673 K and annealed at 873 K) and C6N9.2H3.6B1.2-1.3 (for those synthesized and annealed at 873 K). Fourier transform infrared spectroscopy and 13C nuclear magnetic resonance showed that the s-triazine rings from the melamine molecules were preserved in materials synthesized and annealed at 673 and 873 K. The sample obtained at 873 K had a graphite-like structure as suggested by X-ray and electron diffraction studies. The s-triazine rings were decomposed in the materials synthesized or annealed at 1223 K and the main product obtained was turbostratic boron nitride. © 1998 Chapman & Hall     

Hydrothermal Solubilization–Hydrolysis–Dehydration of Cellulose to Glucose and 5-Hydroxymethylfurfural Over Solid Acid Carbon Catalysts

Solid acid catalysts based on graphite-like mesoporous carbon material Sibunit were developed for the one-pot solubilization–hydrolysis–dehydration of cellulose into glucose and 5-hydroxymethylfurfural (5-HMF). The catalysts were produced by treating Sibunit surface with three different procedures to form acidic and sulfo groups on the catalyst surface. The techniques used were: (1) sulfonation by H₂SO₄ at 80–250 °C, (2) oxidation by wet air or 32 v/v% solution of HNO₃, and (3) oxidation-sulfonation what meant additional sulfonating all the oxidized carbons at 200 °C. All the catalysts were characterized by low-temperature N₂ adsorption, titration with NaOH, TEM, XPS. Sulfonation of Sibunit was shown to be accompanied by surface oxidation (formation of acidic groups) and the high amount of acidic groups prevented additional sulfonation of the surface. All the Sibunit treatment methods increased the surface acidity in 3–15 times up to 0.14–0.62 mmol g^?1 compared to pure carbon (0.042 mmol g^?1). The catalysts were tested in the depolymerization of mechanically activated microcrystalline cellulose at 180 °C in pure water. The main products 5-HMF and glucose were produced with the yields in the range of 8–22 wt% and 12–46 wt%, respectively. The maximal yield were achieved over Sibunit sulfonated at 200 °C. An essential difference in the composition of main products obtained with solid acid Sibunit carbon catalysts (glucose, 5-HMF) and soluble in water H₂SO₄ catalysts (formic and levulinic acids) as well as strong dependence of the reaction kinetics on the morphology of carbon catalysts argue for heterogenious mechanism of cellulose depolymerization over Sibunit.     

Tridimensional ultrastructure of perfusion fixed gastrointestinal epithelial cells by high resolution scanning electron microscopy

Improvements in the design of modern scanning electron microscopes (SEM) and new methods of specimen preparation incorporating chemical removal of the cytosol and cytoskeleton, now make it possible to view cells and their organelles in three dimensions (3D) at high magnification. In this experiment, high resolution SEM (HRSEM) utilizing new methods of tissue preparation was used to study the intracellular structures of the mouse ileum. In addition, in vivo intestinal perfusion was used to further enhance cellular preservation. Using these modifications it was possible to visualize, in 3D, the fine structure of intestinal epithelial cells and intracellular organelles such as the nucleus, mitochondria, endoplasmic reticulum, and Golgi complex, as well as microvilli and cell membrane. Whole mitochondria appeared as irregularly shaped organelles which contained tubular cristae. Plate-like cristae were not observed. The brush border was found to be a closely packed array of cylindrical projections. The extensive folding and structural intricacy of lateral cell membranes between absorptive cells could only be appreciated by viewing this tissue with 3D HRSEM. The use of HRSEM to study 3D ultrastructure of cells and their organelles will improve our understanding of the structure-function relationships in both the healthy and diseased gastrointestinal tract.     

You like it,you learn it: affectivity and learning in competitive social role play gaming

Despite the alleged ability of digital game-based learning (DGBL) to foster positive affect and in turn improve learning, the link between affectivity and learning has not been sufficiently investigated in this field. Regarding learning from team-based games with competitive elements, even less is known about the relationship between competitiveness (as a dispositional trait) and induced positive affect. In this media comparison study with between-subject design, participants (N?=?325; high school and college students) learned about the EU’s policy agenda by means of a debate-based method delivered through one of three educational media: a) through a social role-playing game with competitive elements played on computers, b) through a very similar game played without computers and c) through a non-game workshop. Unlike many previous DGBL studies, this study used participant randomization and strived to address the teacher effect and the length of exposure effect, while also using the same learning materials and a very similar educational method for all three treatments. Both games induced comparatively higher generalized positive affect and flow. Participants also learned more with the games. Positive affect, but not flow, mediated the influence of educational media on learning gains. Participants’ competitiveness was partly related to positive affect and experiencing flow but unrelated to learning gains. These outcomes held both when the game was played using computers, as well as without them. The study indicates that the ability of an educational intervention to instigate positive affect is an important feature that should be considered by educational designers.     

Lipid Emulsions Containing Medium Chain Triacylglycerols Blunt Bradykinin-Induced Endothelium-Dependent Relaxation in Porcine Coronary Artery Rings

Lipid emulsions for parenteral nutrition are used to provide calories and essential fatty acids for patients. They have been associated with hypertriglyceridemia, hypercholesterolemia, and metabolic stress, which may promote the development of endothelial dysfunction in patients. The aim of the present study was to determine whether five different industrial lipid emulsions may affect the endothelial function of coronary arteries. Porcine coronary artery rings were incubated with lipid emulsions 0.5, 1, or 2% (v/v) for 30 min before the determination of vascular reactivity in organ chambers and the level of oxidative stress using electron paramagnetic resonance. Incubation of coronary artery rings with either Lipidem^®, Medialipid^® containing long- and medium-chain triacylglycerols (LCT/MCT), or SMOFlipid^® containing LCT, MCT, omega-9, and -3, significantly reduced the bradykinin-induced endothelium-dependent relaxation, affecting both the nitric oxide (NO) and endothelium-dependent hyperpolarization (EDH) components, whereas, Intralipid^® containing LCT (soybean oil) and ClinOleic^® containing LCT (soybean and olive oil) did not have such an effect. The endothelial dysfunction induced by Lipidem^® was significantly improved by indomethacin, a cyclooxygenase (COX) inhibitor, inhibitors of oxidative stress (N-acetylcysteine, superoxide dismutase, catalase) and transition metal chelating agents (neocuproine, tetrathiomolybdate, deferoxamine and l-histidine). Lipidem^® significantly increased the arterial level of oxidative stress. The present findings indicate that lipid emulsions containing LCT/MCT induce endothelial dysfunction in coronary artery rings by blunting both NO- and EDH-mediated relaxations. The Lipidem^®-induced endothelial dysfunction is associated with increased vascular oxidative stress and the formation of COX-derived vasoconstrictor prostanoids.