Two‐dimensional model of methane thermal decomposition reactors with radiative heat transfer and carbon particle growth

A two‐dimensional model of methane thermal decomposition reactors is developed which accounts for coupled radiative heat and polydisperse carbon particle nucleation, growth, and transport. The model uses the Navier–Stokes equations for the fluid dynamics, the radiative transfer equation for methane and particle species radiation absorption, the advection–diffusion equation for gas and particle species transport, and a sectional method for particle species nucleation, heterogenous growth, and coagulation. The model is applied to a tubular laminar flow reactor. The simulation results indicate the development of a reaction boundary layer inside the reactor, which results in significant variation of the local particle size distribution across the reactor. © 2011 American Institute of Chemical Engineers AIChE J, 58: 2545–2556, 2012     

A novel low complexity data demodulation algorithm for pulse position modulation

In this paper, a low complexity data demodulation algorithm is proposed that requires time of arrival information of the received signal exclusively. As an application example, the algorithm is applied to an ultra-wideband impulse radio communication system with pulse position modulation. The algorithm is insensitive to a common time delay for all pulses, that means, it does not require an accurate synchronization between the transmitter and the receiver. For the performance estimation, only a symbol synchronization is assumed, i.e., that there is a priori knowledge which pulse marks the beginning of a received data symbol. The performance of the proposed algorithm is evaluated for straightforward time of arrivals estimators, such as a maximum detector or a threshold detector. It is shown that the proposed algorithm outperforms a least squares algorithm in all considered scenarios. In particular, an increased robustness against additive white Gaussian noise, impulse like noise, and multiuser interference is demonstrated as well as an improved performance for multipath propagation channels.     

Towards online and personalized daily activity recognition,habit modeling,and anomaly detection for the solitary elderly through unobtrusive sensing

Multimedia Tools and Applications - Rapid population aging and advances in sensing technologies motivate the development of unobtrusive healthcare systems, designed to unobtrusively collect an...     

The XTS-AES Disk Encryption Algorithm and the Security of Ciphertext Stealing

Abstract

This paper describes the importance of the XTS-AES encryption mode of operation and concludes with a new proof for the security of ciphertext stealing as used by XTS-AES. The XTS-AES mode is designed for encrypting data stored on hard disks where there is not additional space for an integrity field. Given this lack of space for an integrity field, XTS-AES builds on the security of AES by protecting the storage device from many dictionary and copy/paste attacks. The operation of the XTS mode of AES is defined in the IEEE 1619-2007 standard [3 IEEE Std 1619–2007 . April 18, 2008 . The XTS-AES Tweakable Block Cipher. Institute of Electrical and Electronics Engineers, Inc.  [Google Scholar]], and has been adopted by the U.S. National Institute of Standards and Technology (NIST) as an approved mode of operation under FIPS 140-2 [2 Dworkin , M. December 2009 . NIST SP 800-38E, “Recommendation for Block Cipher Modes of Operation: The XTS-AES Mode for Confidentiality on Storage Devices”.  [Google Scholar]]. XTS-AES builds on the XEX (Xor-Encrypt-Xor) mode originally proposed by Rogaway [8 Rogaway , P. 2004 . Efficient Instantiations of Tweakable Block ciphers and Refinements to Modes OCB and PMAC. Advances in Cryptology–Asiacrypt 2004, Lecture Notes in Computer Science, vol. 3329, Springer-Verlag, pp. 16–31. Available at http://www.cs.ucdavis.edu/rogaway/papers/offsets.pdf (Accessed 6 January 2012) . [Google Scholar]].     

Transfer of learning in virtual environments: a new challenge?

The aim of all education is to apply what we learn in different contexts and to recognise and extend this learning to new situations. Virtual learning environments can be used to build skills. Recent research in cognitive psychology and education has shown that acquisitions are linked to the initial context. This provides a challenge for virtual reality in education or training. A brief overview of transfer issues highlights five main ideas: (1) the type of transfer enables the virtual environment (VE) to be classified according to what is learned; (2) the transfer process can create conditions within the VE to facilitate transfer of learning; (3) specific features of VR must match and comply with transfer of learning; (4) transfer can be used to assess a VE’s effectiveness; and (5) future research on transfer of learning must examine the singular context of learning. This paper discusses how new perspectives in cognitive psychology influence and promote transfer of learning through the use of VEs.     

Data Distribution in a Peer to Peer Storage System

This article presents distributions for data storage in a P2P system. In peer to peer storage system we have to face a continuous stream of peer failures. So to insure data durability data are usually disseminated using a dispersal redundant scheme and a dynamic data reconstruction process is used to rebuild lost data. There is an important communication traffic to maintain data integrity. So, it is important to reduce the impact of this reconstruction process on peer. To minimize end user traffic according to the reconstruction process, distribution must take into account a new measure: The maximum disturbance cost of a peer. To begin with, we define a static distribution scheme which minimizes this reconstruction cost based on prime numbers theory. We compare this distribution with the random distribution, the most used in data distribution.This Project () is supported by the ACI GRID CGP2P and the ACI MD GDX.     

Minimum variance prediction and control for adaptive optics

Adaptive Optics (AO) systems enable to compensate the adverse effects of atmospheric turbulence on ground-based telescopes’ images in real time, using a deformable mirror (DM) inserted in the telescope’s optical path, and measurements provided by a wavefront sensor (WFS). This paper revisits minimum-variance (MV) control design for astronomical AO systems in a state-space framework. It presents a survey of the modeling and control issues arising in this multi-variable disturbance rejection problem. In a linear time-invariant framework, and under some mild assumptions, the optimal solution to MV control for AO systems is shown to be a discrete-time LQG controller. This result holds for a DM with instantaneous response, and for a fairly general class of DM’s dynamics. The state-space approach is extended to Wide-field Adaptive Optics (WfAO) configurations involving several DMs and/or WFSs. Integral-action control used in existing AO systems is compared with the LQG controller. Experimental WfAO results obtained on a laboratory test bench are presented, showing significant improvement in performance. Finally, open issues and perspectives of applicative and/or theoretical interests are discussed.     

Morphological and Mechanical Investigation of Double-Layer Reciprocal Structures

The simple connection conditions of reciprocal structures means that technological constraints become geometrical constraints and bending moments are increased. Geometrical constraints can be dealt by using form-finding methods such as a dynamic relaxation algorithm, but resisting bending moments to gain stiffness is difficult to accomplish without increasing the weight of the structure. For standard reticulated structures, common strategies consist in introducing curvature in the structure and/or modifying the structure into a double-layer space structure. The proposed paper is thus an attempt to apply these strategies to reciprocal structures and to develop spherical domes with a structural thickness. Several configurations will be investigated and compared in term of geometrical feasibility and structural performance.     

Anthropomorphisms in multimedia learning: Attract attention but do not enhance learning?

Anthropomorphizing graphical elements in multimedia learning materials improves learning outcomes. The reasons for enhanced learning are unclear. We extended a seminal anthropomorphism study in order to examine whether the effect of anthropomorphisms on learning outcomes, both immediate and delayed, is caused by the anthropomorphized elements' effects on attention distribution or by elevated positive affective–motivational states. The study had a partial 3 × 2 design (the materials' graphics: schematic vs. black‐and‐white anthropomorphisms vs. colourful anthropomorphisms × eye tracker: present vs. absent). The participants were university students (N = 181). Unexpectedly, we found no significant effect of anthropomorphisms on learning outcomes. Anthropomorphisms significantly affected attention distribution during initial fixations but not overall. Modest effect on enjoyment was found, but no such effect was detected as concerns flow and generalized positive affect. We also found that the eye tracker's mere presence had slight adverse effects on learners, but these effects did not compromise learning.