Anaerobic biodecolorization of textile reactive anthraquinone and phthalocyanine dyebaths under hypersaline conditions.

The biological decolorization of two industrial, spent textile reactive dyebaths was investigated using a suspended-growth, halophilic mixed culture fed with glucose. Dyebath I contained mainly Reactive Blue 19 (RB19), an anthraquinone dye, whereas dyebath II contained mainly Reactive Blue 21 (RB21), a phthalocyanine dye. Batch assays under anaerobic conditions with the two neutralized dyebaths resulted in 87 and 37% extent of decolorization for dyebaths I and II, respectively. The rate of glucose utilization and the extent of acetate production were impacted in the presence of each dyebath as compared to the control culture. However, dyebath decolorization occurred despite moderate culture inhibition. Reuse of a biologically renovated RB19-containing dyebath in the dyeing process resulted in reproducible but not identical cotton fabric shades as compared to a standard dyeing (i.e., control) using fresh water. This difference is attributed to a variable degree of RB19 aggregation during the dyeing process and is not related to the efficiency of the biodecolorization process. Further improvement of the redyeing efficiency will lead to the development of an in-plant, closed-loop decolorization system resulting in significant water conservation and minimization of textile pollutants such as salt and dyes.     

Analysis of the possibility of implementing the principle of redistribution of concentration fields for reactive distillation processes

The evolution of the phase portrait for the dynamic system of open evaporation combined with a chemical reaction for a fixed liquid amount was studied as dependent on the rate constants of the reaction. A three-component azeotropic mixture whose vapor-liquid equilibrium diagram is characterized by two distillation regions was considered. The possibility of the open evaporation trajectory to transfer through the separatrix between the distillation regions was shown, as well as the possibility of implementing the principle of redistribution of the concentration fields due to chemical reactions occurring in reactive distillation columns.Translated from Teoreticheskie Osnovy Khimicheskoi Tekhnologii, Vol. 39, No. 2, 2005, pp. 115–119.Original Russian Text Copyright © 2005 by Solokhin, Nazanskii, Timofeev.     

Performance analysis of information dissemination by flooding

Performance properties are established for the dissemination by flooding of a database that is initially distributed among the nodes of a communications network. An example of this general process is the dissemination of network status information as a component of the adaptive routing mechanism in a network like Arpanet. Bounds are given on the progress of the dissemination process at a sequence of times before the completion of the process, whereas earlier results only bounded the time until completion. The present bounds further extended earlier analysis by treating the diameter explicitly as a parameter. Specialized versions of the bounds are given for k-connected networks. The bounds yield a recognition property whereby a node can recognize that it has received the entire database without having a priori knowledge of the size of the database. An earlier assumption about a fixed time for correct message transmission over any edge is relaxed to assume only an upper bound on these transmission times     

Performance of unitary heat pumps: review of ASHRAE Symposium session

1. 1. System design optimization and validation for single-speed heat pump by S.K. Fischer and C.K. Rice, Oak Ridge National Laboratories.

2. 2. Analysis of on/off cycling for an air-to-air heat pump operating in the heating mode by W.A. Miller, Oak Ridge National Laboratories.

3. 3. Field measured cycling, frosting and defrosting losses for a high efficiency air source heat pump by V.D. Baxter and J.C. Moyers, Oak Ridge National Laboratories.

4. 4. Design and available energy analysis of a heating-only residential heat pump for the Western Pacific Northwest by D.E. Elger, C.M. Reistad and S. Lang, Oregon State University.

5. 5. A study of heat pump service life by Nance C. Lovvorn, Alabama Power Company and Carl C. Hiller, Electric Power Research.

Hot-carrier reliability of 20V MOS transistors in 0.13 μm CMOS technology

This paper presents results of reliability investigation of 20 V N-Drift MOS transistor in 0.13 μm CMOS technology. Due to high performances required for CMOS applications, adding high voltage devices becomes a big challenge to guarantee the reliability criteria. In this context, new reliability approaches are needed. Safe Operating Area are defined for switch, V_ds limited and V_gs limited applications in order to improve circuit designs. For V_ds limited applications, deep doping dose effects in drift area are investigated in correlation to lifetime evaluations based on device parameter shifts under hot carrier stressing. To further determine the amount and locations of hot carriers injections, accurate 2D technological and electrical simulations are performed and permit to select the best compromise between performance and reliability for N-Drift MOS transistor.     

Fabrication of Strain-Relaxed Si<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript>x</Subscript>/Si(001) Buffer Layers of Low Surface Roughness

The results are presented of the fabrication of strain-relaxed graded Si_{1 − x} Ge_x/Si(001) buffer layers with a maximum Ge fraction of about 0.25 that have a low density of threading dislocations (<10⁶ cm⁻²) and low surface roughness. The buffer layers are grown by atmospheric-pressure hydride CVD. It is found that chemical mechanical polishing can reduce their surface roughness to a level comparable with that of the original Si(001) substrates. It is shown that the polished buffer layers can serve as substrates for MBE-grown SiGe/Si heterostructures.__________Translated from Mikroelektronika, Vol. 34, No. 4, 2005, pp. 243–250.Original Russian Text Copyright © 2005 by Vostokov, Drozdov, Krasil’nik, Kuznetsov, Novikov, Perevoshchikov, Shaleev.     

A 1 GHz CMOS analog front-end for a generalized PRML read channel

A 1 GHz CMOS analog front-end for general partial response maximum likelihood (GPRML) read channel in hard disk drive application has been implemented in 0.35 /spl mu/m CMOS. A continuous time analog filter fulfills the relaxed equalization for GPRML detection and can save up to 35% power consumption for the whole read channel. An analog DFE-based timing recovery loop is implemented to avoid the extremely long latency in the digital signal processing path (Viterbi decoder). The measured performances is 1.1 dB off simulations at 800 MHz and 1.6 dB off at 1GHz. The chip draws 240 mW from a 3.3 V supply at 800MHz clock and 380 mW from a 3.6 V supply at 1 GHz clock.     

Force criteria of the state of limiting equilibrium of a cracked plate under biaxial loading

We deduce the theoretical formula taking into account the influence of biaxial loading of a plate weakened by a crack on the stress intensity factor K _I. This enables us to compute the characteristic of crack resistance K _c according to the known boundary forces. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 6, pp. 14–16, November–December, 2007.     

Midplane-symmetry breaking in the flow between two counter-rotating disks

This paper considers the axisymmetric steady flow driven by exact counter rotation of two co-axial disks of finite radius. At the edges of the rotating disks one of three conditions is (typically) imposed: (i) zero velocity, corresponding to a stationary, impermeable, cylindrical shroud (ii) zero normal velocity and zero tangential fluid traction, corresponding to a (confined) free surface and (iii) an edge constraint that is consistent with a similarity solution of von Kármán form. The similarity solution is valid in an infinite geometry and possesses a pitchfork bifurcation that breaks the midplane symmetry at a critical Reynolds number. In this paper, similar bifurcations of the global (finite-domain) flow are sought and comparisons are made between the resulting bifurcation structure and that found for the similarity solution. The aim is to assess the validity of the nonlinear similarity solutions in finite domains and to explore the sensitivity of the solution structure to edge conditions that are implicitly neglected when assuming a self-similar flow. It is found that, whilst the symmetric similarity solution can be quantitatively useful for a range of boundary conditions, the bifurcated structure of the finite-domain flow is rather different for each boundary condition and bears little resemblance to the self-similar flow.