Electromagnetic signatures as a tool for connectionless test

When we test boards, we usually think in terms of traditional electrical test (in-circuit, flying probe) and nonelectrical test (optical, x-ray). This Orebro University article develops an alternative, connectionless technique based on scanning the electromagnetic field generated by active on-board devices. Could this make it into industry as an additional diagnostic tool?.     

Phylogenetic scanning: a computer-assisted algorithm for mapping gene conversions and other recombinational events

An algorithm, 'phylogenetic scanning', is described for mapping gene conversion events where comparative DNA sequence data are available from different species. In this algorithm, sets of hypothetical phylogenetic trees are constructed that describe possible sequence relationships due to gene conversions in different species lineages; these trees are then evaluated by the principle of parsimony at intervals in the sequence alignment. When used to map gene conversion events that occurred between the pair of gamma-globin genes of higher primates, the algorithm gives results nearly identical to those obtained using a tedious manual approach. Suggestions are also provided for adaptation of this procedure to the analysis of other recombination events.     

Mechanism of the skeletal isomerisation of linear butenes over ferrierite: analysis of side reactions

An investigation of the effect of reaction conditions on product distribution in the skeletal isomerisation reaction of linear butenes has been carried out. The main reaction routes over ferrierite have been identified. Beside the main product isobutene, major by-product formation occurs. The unwanted reactions include dimerisation of butene to form octenes, hydrogen transfer yielding small amounts of saturated C₃ and C₄ hydrocarbons and disproportionation producing propene and pentenes. The most abundant by-products were pentene and propene, though these were not formed in equimolar amounts as could be expected. Oligomerisation experiments of propene over ferrierite produced large amounts of butene and pentene, revealing the presence of adsorbed nonene. The cracking of this surface species to hexene and propene is the most likely reaction route for the excess propene formation. This additional path to propene formation operates mainly at temperatures above 623 K.     

Synthesis,characterization and properties of functionalized styrene–maleimide copolymers

New functionalized styrene–maleimide copolymers were prepared by free radical copolymerization of styrene (St) and N‐4‐carboxybutylmaleimide (NBMI) in chloroform, using 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monomer and copolymer characterization was carried out by ¹H‐ and ¹³C‐NMR. Copolymer composition was determined by elemental analysis and Fourier‐transform infrared (FTIR) spectroscopy. The glass transition temperature (from DSC) and the thermogravimetric analysis (TGA) of the copolymers were consistent with the thermal behavior and stability observed for alternating St–maleimide copolymers. St–NBMI copolymers crosslinked with divinylbenzene (DVB) were also synthesized and their cation exchange properties evaluated in order to assess the capacity of the new copolymers to bind metallic ions. Copyright © 2005 Society of Chemical Industry     

2,4,6‐Trichlorophenol and phenol removal in methanogenic and partially‐aerated methanogenic conditions in a fluidized bed bioreactor

A fluidized bed bioreactor (FBBR) was operated for more than 575 days to remove 2,4,6‐trichlorophenol (TCP) and phenol (Phe) from a synthetic toxic wastewater containing 80 mg L^?1 of TCP and 20 mg L^?1 of Phe under two regimes: Methanogenic (M) and Partially‐Aerated Methanogenic (PAM). The mesophilic, laboratory‐scale FBBR consisted of a glass column (3 L capacity) loaded with 1 L of 1 mm diameter granular activated carbon colonized by an anaerobic consortium. Sucrose (1 g COD L^?1) was used as co‐substrate in the two conditions. The hydraulic residence time was kept constant at 1 day. Both conditions showed similar TCP and Phe removal (99.9 + %); nevertheless, in the Methanogenic regime, the accumulation of 4‐chlorophenol (4CP) up to 16 mg L^?1 and phenol up to 4 mg L^?1 was observed, whereas in PAM conditions 4CP and other intermediates were not detected. The specific methanogenic activity of biomass decreased from 1.01 ± 0.14 in M conditions to 0.19 ± 0.06 mmolCH₄ h^?1 gTKN^?1 in PAM conditions whereas the specific oxygen uptake rate increased from 0.039 ± 0.008 in M conditions to 0.054 ± 0.012 mmolO₂ h^?1 gTKN^?1, which suggested the co‐existence of both methanogenic archaea and aerobic bacteria in the undefined consortium. The advantage of the PAM condition over the M regime is that it provides for the thorough removal of less‐substituted chlorophenols produced by the reductive dehalogenation of TCP rather than the removal of the parent compound itself. Copyright © 2005 Society of Chemical Industry     

The Metaflow architecture

The Metaflow architecture, a unified approach to maximizing the performance of superscalar microprocessors, is introduced. The Metaflow architecture exploits inherent instruction-level parallelism in conventional sequential programs by hardware means, without relying on optimizing compilers. It is based on a unified structure, the DRIS (deferred-scheduling, register-renaming instruction shelf), that manages out-of-order execution and most of the attendant problems. Coupling the DRIS with a speculative-execution mechanism that avoids conditional branch stalls results in performance limited only be inherent instruction-level parallelism and available execution resources. Although presented in the context of superscalar machines, the technique is equally applicable to a superpipelined implementation. Lightning, the first implementation of the Metaflow architecture, which executes the Sparc RISC instruction set is described     

Materials technology for aerospace applications

Modern helicopter design depends on the successful combination of materials to fulfil a very wide range of critical functions. In the past few years demands from the aerospace industry have caused considerable enhancement in the favourable properties of both polymer based materials and metals. These are discussed in connection with the progressive technical evolution of helicopters and other advanced technological products from the Westland Group.     

Brazzein, a new high-potency thermostable sweet protein from Pentadiplandra brazzeana B

We have discovered a new high-potency thermostable sweet protein, which we name brazzein, in a wild African plant Pentadiplandra brazzeana Baillon. Brazzein is 2,000 times sweeter than sucrose in comparison to 2% sucrose aqueous solution and 500 times in comparison to 10% of the sugar. Its taste is more similar to sucrose than that of thaumatin. Its sweetness is not destroyed by 80 degrees C for 4 h. Brazzein is comprised of 54 amino acid residues, corresponding to a molecular mass of 6,473 Da.     

Knowledge, data, and models

The object-oriented approach to integrating knowledge data, and models is examined. Under the object-oriented paradigm, everything is an object, which is itself an encapsulation of data and methods to manipulate and access the data within the object. Thus knowledge, data, and models can be defined as special kinds of objects. Active knowledge/data language (KDL), a functional object-oriented database system is considered, covering the active-KDL-type system and functions, and query-driven simulation