Targets and methods for the detection of processed animal proteins in animal feedstuffs

Bovine spongiform encephalopathy (BSE), or ‘mad cow disease’, is one of several transmissable spongiform encephalopathies (TSEs) known to affect certain mammals and is spread through the ingestion of infected animal tissue. It is believed that the inadvertent contamination of meat and bone meal (MBM) with infected animal tissue and the subsequent use of this material as a feed supplement contributed to the spread of the disease in cattle. As a result, the use of processed animal proteins (PAPs) in animal feeds is regulated in many parts of the world. Although feed testing is the only definitive means to certify compliance, regulatory compliance often relies solely on paper certification. Recently, rapid methods have become available that can be used by regulators to determine compliance during routine inspections. We describe a rapid, immunochromatographic strip test that can detect 0.1% MBM in animal feed. The test takes 15 min to perform and large numbers of samples can be screened for PAPs simultaneously.     

Exciton photoluminescence in doped quasi-1D structures based on silicon

The dependence of carrier density in silicon quantum wires sheathed with SiO₂ on the wire diameter and the position of impurity atoms in respect to the wire center is analyzed theoretically. It is shown that, as the diameter of wires and nanocrystals decreases, the ionization energy of a dopant increases; therefore, the free carrier density decreases, and the screening of the Coulomb attraction becomes ineffective. As a result, the photoluminescence is defined by the radiative recombination of excitons even in the case of heavily doped Si. These conclusions are supported by the data of experimental study of spectral, excitation-power, and temperature dependences of photoluminescence in porous silicon structures fabricated on lightly and heavily doped Si substrates.     

Modeling of the Sorption Dynamics in Multicomponent Ion-Exchange Systems with Consideration of Complexation Reactions on the Basis of the Surface Complexation Theory

The sorption dynamics in multicomponent ion-exchange systems with consideration of complexation reactions in solution is theoretically described by solving (on a computer) nonlinear material balance equations and kinetic equations of internal diffusion. Equilibria in multicomponent ion-exchange systems are characterized using the surface complexation theory. According to this theory, fixed groups of an ion exchanger and counterions form complexes located in different layers (Stern layers) at different distances from the surface. These layers constitute a circuit of series-connected capacitors. The fundamental advantage of such an approach is the fact that equilibria in multicomponent systems can be described in terms of a set of parameters obtained for binary systems. Additional account is taken of complexation reactions in the solution in the space between sorbent grains in an ion-exchange column. The H⁺–A–B three-component metal-ion exchange in various systems (A, B = Zn²⁺, Co²⁺, Ni²⁺, Cd²⁺, Ca²⁺, and Na⁺) is studied. Comparison is made between the results of numerical calculations of the characteristics of the H⁺–A ^{n +}–B ^{n +} ion exchange in multicomponent systems containing metal ions with and without consideration of chemical reactions.     

A Sampling Approach for Intentional Islanding of Distributed Generation

This paper proposes an innovative way of making a decision to island (or synchronize) distributed generators when operating conditions of a distribution system are varied. Islanding decisions are made when a network undergoes disturbances. In this approach, there is a decision-making mechanism, which samples states of the network operating condition to either synchronize or island in an identified period of time. Decision making is achieved through extended sequential sampling, which manages generator states within specific time periods. The approach can minimize the duration of islanded operation and manage generators' re-connection to the grid. Use of the proposed mechanism and sampling approach offer benefits over conventional relays; incorrect operations due to errors in measurements are reduced because the operational actions are not based on a single decision sample, but instead rely on extended sequential sampling over a number of samples. A case study is investigated using the IEEE 30-bus test system and the results are presented for this new approach     

Effect of Stress State on Growth of Interfacial Intermetallic Compounds Between Sn-Ag-Cu Solder and Cu Substrates Coated with Electroless Ni Immersion Au

Excessive intermetallic compound (IMC) growth in solder joints will significantly decrease the reliability of the joints. IMC growth is known to be influenced by numerous factors during the component fabrication process and in service. It is reported that, other than temperature and holding time, stress can also influence the IMC growth behavior. However, no existing method can be used to study the effect of stress state on IMC growth in a controlled manner. This paper presents a novel method to study the effect of stress on interfacial IMC growth between Sn-Ag-Cu solder and a Cu substrate coated with electroless Ni immersion Au (ENIG). A C-ring was used and in-plane bending induced tensile and compressive stresses were applied by tightening the C-ring. Results revealed that in-plane compressive stress led to faster IMC growth as compared with in-plane tensile stress.     

Zero-valent iron treatment of RDX-containing and perchlorate-containing wastewaters from an ammunition-manufacturing plant at elevated temperatures.

The use of zero-valent iron for treating wastewaters containing RDX and perchlorate from an army ammunition plant (AAP) in the USA at elevated temperatures and moderately elevated temperature with chemical addition was evaluated through batch and column experiments. RDX in the wastewater was completely removed in an iron column after 6.4 minutes. Increasing the temperature to 75 degrees C decreased the required retention time to 2.1 minutes for complete RDX removal. Perchlorate in the wastewater was completely removed by iron at an elevated temperature of 150 degrees C in batch reactors in 6 hours without pH control. Significant reduction of perchlorate by zero-valent iron was also achieved at a more moderate temperature (75 degrees C) through use of a 0.2 M acetate buffer. Based on the evaluation results, we propose two innovative processes for treating RDX-containing and perchlorate-containing wastewaters: a temperature and pressure-controlled batch iron reactor and subsequent oxidation by existing industrial wastewater treatment plant; and reduction by consecutive iron columns with heating and acid addition capabilities and subsequent oxidation.