Reaction steady states and stationary states in modelling semi-batch enzyme hydrolysis

Dimensionless material balance equations describing an uninhibited enzyme hydrolysis process in a semi-batch reactor (i.e. fed-batch reactor) are formulated; numerical solution of these equations provided concentration profiles of the enzyme-substrate complex by using published kinetic parameters. The unrestricted values obtained are compared with estimates based separately on the reaction steady state and stationary state assumptions. Results are discussed in terms of the enzyme/substrate inventory used and it is found that the reaction steady state is a satisfactory approximation only when this ratio is sufficiently small. The stationary state may be a better approximation at other values, particularly when enzyme is added to substrate or when an empty tank is being filled. Reaction yields from semi-batch and batch operations are compared. Processing takes longer in the semi-batch operations and complete conversions are only practical in this mode when enzyme is added to substrate.     

Deep submicron CMOS based on silicon germanium technology

The advantages to be gained by using SiGe in CMOS technology are examined, Conventional MOSFETs are compared with SiGe heterojunction MOSFETs suitable for CMOS technology and having channel lengths between 0.5 and 0.1 μm. Two-dimensional computer simulation demonstrates that the improved mobility in the SiGe devices, due to higher bulk mobility and the elimination of Si/SiO₂ interface scattering by the inclusion of a capping layer, results in significant velocity overshoot close to the source-end of the channel. The cut-off frequency, f_t , is found to increase by around 50% for n-channel devices while more than doubling for p-channel devices for typical estimates of mobility. The results offer the prospect of a more balanced CMOS and improved circuit speed especially when using dynamic logic     

The alpha-fetoprotein level analysis in open neural tube defects and chromosomal aberrations in the fetus

The effects of 1-hydroxyethylidene-1, 1-bisphosphonate (HEBP) and two Chinese traditional (Kampo) medicines, Dai-saiko-to and Saiko-ka-ryukotsu-borei-to on spontaneous soft tissue (heart and tongue) mineralization in DBA/2NCrj mice were studied. These agents were given orally for 4 weeks to DBA/2NCrj mice. After 2 weeks of administration in the heart, 0.006 and 0.03% (w/v) HEBP decreased calcium content by 90 and 30%, respectively, while 0.27 and 2.7 mg/ml Dai-saiko-to reduced calcium content by 30 and 45%, respectively. Saiko-ka-ryukotsu-borei-to (0.27 mg/ml) reduced both calcium and phosphorus content by 50 and 35%, respectively. However, their inhibitory effects on the heart were not observed after 4 weeks of administration. The compounds delayed the onset of increases of bulk calcium and phosphorus content. In the tongue, at 4 weeks, 0.006 and 0.03% (w/v) HEBP reduced calcium content by 30 and 45%, respectively, while two Kampo medicines (at both concentrations used) significantly reduced the content of calcium (by 27-79%) and phosphorus (by 24-32%). These results strongly suggest that two Kampo medicines as well as HEBP may be useful in preventing and curing soft tissue calcification.     

Compatibilizing PPE and PA6 with nitro-phthalimide derivatives

Compatibilization of poly(2,6-dimethyl (PPE) with 1,4 phenylene-ether) PA6 has been achieved in two steps: first, (PPE) was functionalized with N-methyl-4-nitro-phthalimide; then, functionalized PPE was allowed to react, by melt blending, with the amine end group of PA6, giving a trans-imidation product. The reaction path was followed by torque measurements in a Brabender apparatus and the products characterized by infrared (i.r.) and nuclear magnetic resonance (NMR) spectroscopy. The above PPE/PA6 blends, modified with a suitable rubbery component (Kraton G), showed a remarkable Izod impact strength value, compared to the uncompatibilized mixture (170 versus 30 Jm^–1). The maximum impact values were obtained with 1.65% functionalized PPE.     

Inertia-friction welding of SiC-reinforced 8009 aluminium

Inertia-drive friction welding (IFRW) of an 8009 Al alloy (Al-8.5 Fe-1.7 Si-1.3 V, wt%) reinforced with 11 volume per cent SiC particles (8009/SiC/11_p) has been investigated. Inertia-drive friction welds were made with constant energy at two levels of axial force. The microstructures of the base material and the welds were characterized using optical and scanning electron microscopy, while the mechanical properties were evaluated using microhardness and tensile testing. Examination of weld sections revealed that the hot deformation experienced during welding produced a homogenized microstructure with a uniform distribution of SiC particles along the bond line. No evidence of a chemical reaction between the SiC and the matrix was found in any of the welds, but cracking of some of the larger SiC particles was observed in the base material as well as in the IFR welds. The average microhardness of the various heat-and-deformation affected zones (HDZs) of the welds did not vary greatly from that of the base material, and no weld induced weak regions were discerned. The room-temperature (RT) tensile strength of the IFR welds exceeded 90 per cent of the base material. The weld tensile specimens failed at the outer edge of the HDZ for all of the welds tested. The fracture surface of the 8009 matrix of tensile samples for both the base material and the welds exhibited a dimpled appearance indicating a ductile failure, while fracture through the SiC appeared to occur in a brittle fashion. IFRW has proven effective in joining 8009/SiC/11_p with little loss in RT hardness and tensile properties.     

Air bearing design, optimization, stability analysis andverification for sub-25 nm flying

Three sub-25 nm fly height sliders are presented for near contact recording. The designs are geared towards the goal of achieving 10 Gb/in ² areal density. The optimization procedure presented shows promise for facilitating achievement of this goal. The dynamic simulations show the stability of these designs when disturbed from their steady state conditions