Constriction resistance at high signal frequencies

This paper describes the dependence of constriction resistance on signal frequency. This dependence was calculated for circular constrictions ranging in diameter from 10 to 100 /spl mu/m, and for frequencies ranging from dc to 1 GHz. The results indicate that the magnitude of constriction resistance does not deviate appreciably from values predicted by Holm's classical analytical expression, as long as the skin depth is large compared with the constriction radius. For skin depths that are much smaller than the constriction radius, constriction resistance decreases with increasing frequency to an apparent limiting value independent of the constriction radius. At high frequencies, constriction resistance constitutes only one of two components of the total connection resistance measured in practice. The second component of connection resistance is determined by details of the geometry and dimensions of the contact interface, and increases with signal frequency.     

A Proposed Receiver Structure for Optical Communication Systems that Employ Heterodyne Detection and a Semiconductor Laser as a Local Oscillator

Coherent heterodyne detection in optical communication is degraded by phase instabilities present when a semiconductor laser is used as a local oscillator. Postdetection processing that accounts for these instabilities is suggested, based on a diffusion-process model for oscillator instabilities and a maximum-likelihood sequence-estimator of information symbols modulating the received light.     

Further studies on polyamides from bisacid a2

Earlier work on the low temperature solution polyamidation of bisacid A2 has raised a number of structural problems. Work carried out more recently showed that the problem of apparent nonisostoichiometry could be reasonably satisfactorily explained. The present paper reports the synthesis and investigates the properties of a further series of polyamides based upon Bisacid A2. More importantly, however, a detailed characterization and evaluation of the new polymers with respect to their structures is presented. This enabled us to compare the various structures in the light of the experimental evidence provided by a number of analytical and spectroscopic techniques, solution behavior, molecular weight, and thermal, morphological, and mechanical properties. Some work was also done on the effect of incorporating a small amount of a trifunctional monomer into the polyamide system.     

Fatty acid composition of phospholipids and neutral lipids during embryonic and early larval development in Atlantic herring (Clupea harengus,L.)

The fatty acid compositions of total polar and total neutral lipids of Atlantic herring eggs and larvae were determined immediately before fertilization, after fertilization and at various times during subsequent embryonic and early larval development. Within 3 hr after fertilization the percentage of total PUFA in neutral lipid decreased from 33% to 20%, with a reciprocal increase in monoenes. Thereafter the percentage of PUFA in the neutral lipids increased progressively, attaining the original level in ripe eggs by the time of yolk sac absorption. During the larval stages the percentage of PUFA continued to increase in the neutral lipid, reaching almost 44% of the total by day 32 after fertilization, although it was reduced to 32% by day 36. The percentage of monoenes in the neutral lipid displayed a progressive decrease during the whole period of development from 3 hr after fertilization. Throughout all the developmental periods the fatty acid composition of total polar lipids remained essentially constant. The polar lipids of the yolk sac displayed virtually the same fatty acid composition as the larval bodies, but the neutral lipids of the yolk sac were low in PUFA compared to the larval bodies. The results are discussed with reference to changes in lipid class composition during development. The conservation of high levels of PUFA in lipids during embryogenesis and early larval development reflects the importance of these fatty acids during development.     

Dynamics of hydrated iron(II) cations in nafion polymer membranes

Mössbauer studies of Fe²⁺ in water-soaked nafion polymer membranes in the temperature range between 90 K and 250 K have been performed. Above a critical temperature (～ 180 K) the spectra exhibit both elastic narrow absorption lines and quasielastic broad lines. These spectra are typical of bounded diffusion phenomena observed by Mössbauer spectroscopy in macromolecular systems like haemoglobin, myoglobin and ferritin. Similar spectral shapes have been observed by quasielastic neutron scattering from water in nafion membranes. Within 50 K above the critical temperature the total Mössbauer absorption area decreases by an order of magnitude whereas the narrow absorption line decreases by two orders of magnitude. The results are interpreted in terms of bounded diffusive motion of the iron. Using a model based on overdamped harmonically bound Brownian motion, the essential parameters of the iron motion can be derived as a function of temperature. The iron motion most probably reflects the motion of a large Fe²⁺ complex, e.g. Fe(H₂O)²⁺₆, which is attached to the polymer side chains via the sulphonic group.     

Radiation safety of a population inhabiting the area where a nuclear facility is situated

Translated from Atomnaya Énergiya, Vol. 67, No. 2, pp. 81–83, August, 1989.     

Fine-line conductor manufacturing using drop-on demand PZT printingtechnology

An emerging selective metallization process to fabricate fine-line conductors based on drop-on-demand (DOD) ink jet printing and novel nano-particle fluid suspensions (NPFS) was studied. The suspensions consist of 1-10 nm silver or gold particulates that are homogeneously suspended in an organic carrier. A piezo-electric droplet generator driven by a bipolar voltage signal is used to dispense 50-70 μm diameter droplets traveling at 1-3 m/s before impacting a compliant polyimide substrate. The deposit/substrate composite is subsequently processed at 300°C for 15 min to allow for complete evaporation of the carrier and for sintering of the nano-particles, thereby yielding a finished circuit interconnect. Test vehicles created using this technique exhibit features as fine as 120 μm wide and 1 μm thick with resistivities on the order of 3.5×10^-5 Ωcm. The circuitry performed well under environmental conditioning. As expected, repeatability of circuitry fabrication showed sensitivity to the generation of steady, satellite-free droplets. In an effort to generate droplets consistently, it is essential to develop a strong fundamental understanding of the correlation between device excitation parameters and dispensed fluid properties, and to resolve the microrheological behavior of the NPFS when flowing through the droplet generator     

Scrubbing Hydrogen Sulfide from Gases. A Rational Approach

Worsening of the environmental situation in many regions of Russia in recent decades is to a great degree due to production and refining of oil and gas with a high hydrogen sulfide content. Industrial methods of utilization of hydrogen sulfide are extremely irrational: it is either burned in flares or used for production of sulfur whose quality and quantity pose new problems related to its use.     

Transition temperature of anisotropic superconductors with Kondo impurities: Square well model

The Eliashberg equations for an anisotropic superconductor containing Kondo impurities are approximated analytically using the square well model for the electron-phonon interaction. Anisotropy is incorporated via a separable model and the impurities are treated within the Matsuura, Ichinose, and Nagaoka (MIN) formalism. Explicit expressions for the reduction of the superconducting transition temperature are obtained. The derived formulas are generalizations of the MIN results to include both anisotropy and weak electron-phonon coupling effects.