Thermal cross-linking and anti-meltdrop properties of copolyester containing phosphorus/magnesium salt composites by in situ polymerization

Polyester is widely used in household products because of its good mechanical properties and wears resistance, but polyester is easy to ignite and inclined to produce droplet, so its application range is limited. The cross-linkable magnesium hydroxide nanoparticles were incorporated into flame-retardant polyester, which enables the phosphorus-containing copolyester with thermal cross-linking and anti-meltdrop properties. The nanoparticles were achieved by in situ polymerization and acted as a nucleating agent for improving the crystalline properties of the copolyester. Furthermore, the nanoparticles also enhanced anti-meltdrop properties and reduced the heat and gas release during the combustion process of the copolyester. The maximum heat release rate and total smoke release reduced by 39.8% and 74.4% compared with pure polyester. Specifically, the combustion products of the nanoparticles and phosphorus flame retardant could act a barrier role by covering the carbon layer to isolate air and heat, thereby resulting in excellent anti-meltdrop properties. The simple modification method reported here realizes the collaborative modification of flame retardant and anti-meltdrop properties of phosphorous flame-retardant copolyesters by thermal cross-linking.     

大学英语四级考试对职业院校学生英语学习反拨效应研究

本文以成都一所职业学院参加大学英语四级考试(CET-4)的学生为研究对象,采用问卷调查和访谈的形式探讨CET-4对职业院校学生英语学习造成的反拨效应.研究表明,学生普遍认同CET-4的相关测试性质,CET-4对学生产生的正面反拨效应远远超过负面反拨效应.同时研究表明,学生在备考过程中存在着一定的问题,例如对测试评分标准认识不足、缺乏良好的学习习惯等.     

BPDA/ODA体系微支化交联聚酰亚胺薄膜制备与性能研究

以三官能度的1,3,5-三(4-氨基苯氧基)苯(TAPOB)为交联剂,在3,3′,4,4′-联苯四甲酸二酐(BPDA)和4,4′-二氨基二苯醚(ODA)体系聚酰亚胺(PI)薄膜中构建微支化交联结构,制备出一系列具有不同TAPOB含量的PI薄膜,研究了TAPOB含量对薄膜力学性能、热力学性能、介电性能和吸水率的影响.结果表明:TA-POB的引入可明显提高BPDA/ODA体系PI薄膜的综合性能,交联结构的存在有利于提高薄膜的力学性能、降低热膨胀系数(CTE)和吸水率,微支化结构则对降低介电常数有一定的作用.     

Effect of heat treatment on the microstructure and hardness of C-Cr-W-Mo-V-RE Fe-based hardfacing layer

0IntroductionHot-rollers and scissors are the critical parts of thesteel rolling equipments.At present,the surface soften-ing,the early wearing and the tearing are the primary rea-sons for the lowservice life of the hot-rollers and scissors.Although hardfacing has been applied to repaire the partseasily being worn and torn,such as the hot-rollers and thescissors,and has been obtained economic benefits[1-3],this technology has common problem:if the hardfacing lay-er contains more excessive allo…     

PLC在六关节工业机器人控制中的设计应用

本文介绍了应用可编程控制器PLC对六关节工业机器人进行位置控制的方法及其软件硬件系统的设计与实现。     

陶瓷喷砂嘴的冲蚀磨损特性及其损坏机理

采用热压烧结工艺制备了Al2O3/TiC、Al2O3/(W,Ti)C和B4C陶瓷喷砂嘴.以SiC和Al2O3为冲蚀磨料进行了喷砂冲蚀试验.结果表明纯B4C陶瓷材料的烧结温度高、保温时间长、致密度低、晶粒粗,抗弯强度和断裂韧性低,但硬度最高;而Al2O3/TiC和Al2O3/(W,Ti)C陶瓷材料的烧结温度和保温时间比纯B4C陶瓷大大减小,致密度高,抗弯强度和断裂韧性比纯B4C陶瓷高1倍以上,但硬度相对低.对陶瓷喷砂嘴在磨料冲蚀下的应力状态进行了有限元分析,结果表明陶瓷喷嘴入口处所受的应力最大,出口次之,中间区域最小.B4C陶瓷喷砂嘴的最佳入口锥角为11°,而Al2O3/(W,Ti)C陶瓷喷砂嘴的最佳入口锥角为16°.陶瓷喷嘴入口和出口处的磨损机理主要表现脆性断裂;而中间区域的磨损机理主要表现为磨料颗粒对喷嘴内壁表面的研磨、抛光和微切削作用.     

测定银的新催化分光光度法研究──藏红T－碘化钾指示反应体系

根据银对藏红Ｔ与碘离子氧化还原反应的催化作用，建立了一种测定微量银的动力学光度法。方法的线性范围为０．５～４．０μｇ／ｍｌ，检测限为０．０２μｇ／ｍｌ。除Ｈｇ２＋严重干扰，Ｆｅ３＋、Ｃｒ６＋有轻度干扰外，其余常见的离子不影响测定。与常见测定银的动力学法相比，本法反应速度很快，且所有测定均可在室温下进行。     

钢丸增强ZA27复合材料的制备与摩擦磨损特性

采用搅溶加压铸造研制了钢丸增强ＺＡ２７复合材料（ＺＳＣ），复合工艺简便，ＺＳＣ组织致密，钢丸与基体呈冶金结合，切削加工性能良好；在干摩擦和油润条件下，ＺＳＣ的耐磨性随钢丸量的增加而增加，并优于相同试验条件下的ＺＡ２７合金；干摩擦下ＺＳＣ具有自润滑能力和良好的耐磨减摩性能，油润下随滑动速度和载荷的增大其耐磨性较ＺＡ２７更具优势。     

利用粉煤灰生产SiC陶瓷原料

利用粉煤灰部分或全部代替石英砂,配以适量的锯末,在高温炉中特定的烧成制度下,采用SiO2-C还原法将粉煤灰中的二氧化硅与锯末中的碳结合制取高性能的SiC陶瓷原料。利用正交实验对合成工艺中的合成温度、保温时间、碳过量数进行了设计和探索性实验,并对合成产物中的碳化硅的含量进行了测试。研究表明,在经催化剂(FeCl26H2O)浸泡12小时,加入2%矿化剂,在1380℃的合成温度下,保温时间2小时,碳过量10%的情况下,生成的SiC陶瓷原料中SiC的含量在53.6%以上。     

Water Bloom Precursor Analysis Based on Two Direction S-Rough Set

In the field of water quality management, it is vital to determine the main precursory anomalies from the precursor of intricate water bloom in the context of a given area. In this paper, a water bloom precursor analysis method, based on two direction singular rough set, was proposed. This approach was produced on the basis of the different sections and pre-water bloom of water bloom precursor anomalies and characteristic of elements transferred in singular rough set. For testing the validity of two direction singular rough set application in water bloom precursor analysis, Xiangxi River, which is one of the typical tributaries of Three Gorges Reservoir in China, was selected as study area. The result showed that compared with other indexes, pH and dissolved oxygen (DO) are the most valuable indicators of water bloom in the precursory anomalies. Furthermore, regarding with water bloom precursory anomalies in Xiangxi River, most of the nutrient loading and biological community are the key indicators. Hence, this method can determine the main precursory anomaly for water bloom in the study area, which provides powerful knowledge support to water quality specialists for them to comprehensively analyze precursory anomaly so as to find out its relationship with occurrence law of water bloom.